Metal matrix composites reinforced with graphite particles provide better machinability and tribological properties. The present study attempts to find the optimal level of machining parameters for multi-performance c...Metal matrix composites reinforced with graphite particles provide better machinability and tribological properties. The present study attempts to find the optimal level of machining parameters for multi-performance characteristics in turning of Al-SiC-Gr hybrid composites using grey-fuzzy algorithm. The hybrid composites with 5%, 7.5% and 10% combined equal mass fraction of SiC-Gr particles were used for the study and their corresponding tensile strength values are 170, 210, 204 MPa respectively. Al-10%（SiC-Gr） hybrid composite provides better machinability when compared with composites with 5% and 7.5% of SiC-Gr. Grey-fuzzy logic approach offers improved grey-fuzzy reasoning grade and has less uncertainties in the output when compared with grey relational technique. The confirmatory test reveals an increase in grey-fuzzy reasoning grade from 0.619 to 0.891, which substantiates the improvement in multi-performance characteristics at the optimal level of process parameters setting.展开更多
In order to rescue a trapped miner and clean out roadways quickly in a high gas mine shaft after a mining mishap, a special portable cold-cutting equipment is needed, the main technology parameters were calculated acc...In order to rescue a trapped miner and clean out roadways quickly in a high gas mine shaft after a mining mishap, a special portable cold-cutting equipment is needed, the main technology parameters were calculated according to the advanced cold-cutting technology of high pressure abrasive water jet and the portable mixed abrasive water jet equipment （PAWE） was designed to meet the needs of emergency rescue in high gas mine shafts. Tested the PAWE in a high gas environment, and the result shows that the maximum cutting depth of solid iron pipe is 18 mm and the recoilforce of the sprayer is 28.9 N under the conditions that actual cutting pressure is 29 MPa, starting target distance is 10 ram, cutting speed is 180 mm/min and concentration of abrasive is 32%. The course of the experiment in the high gas environment was smooth and continuous, without any explosion. The PAWE is easy to move and operate, but the nozzle which was worn badly in the sprayer should be changed every 8 minutes.展开更多
文摘Metal matrix composites reinforced with graphite particles provide better machinability and tribological properties. The present study attempts to find the optimal level of machining parameters for multi-performance characteristics in turning of Al-SiC-Gr hybrid composites using grey-fuzzy algorithm. The hybrid composites with 5%, 7.5% and 10% combined equal mass fraction of SiC-Gr particles were used for the study and their corresponding tensile strength values are 170, 210, 204 MPa respectively. Al-10%（SiC-Gr） hybrid composite provides better machinability when compared with composites with 5% and 7.5% of SiC-Gr. Grey-fuzzy logic approach offers improved grey-fuzzy reasoning grade and has less uncertainties in the output when compared with grey relational technique. The confirmatory test reveals an increase in grey-fuzzy reasoning grade from 0.619 to 0.891, which substantiates the improvement in multi-performance characteristics at the optimal level of process parameters setting.
文摘In order to rescue a trapped miner and clean out roadways quickly in a high gas mine shaft after a mining mishap, a special portable cold-cutting equipment is needed, the main technology parameters were calculated according to the advanced cold-cutting technology of high pressure abrasive water jet and the portable mixed abrasive water jet equipment （PAWE） was designed to meet the needs of emergency rescue in high gas mine shafts. Tested the PAWE in a high gas environment, and the result shows that the maximum cutting depth of solid iron pipe is 18 mm and the recoilforce of the sprayer is 28.9 N under the conditions that actual cutting pressure is 29 MPa, starting target distance is 10 ram, cutting speed is 180 mm/min and concentration of abrasive is 32%. The course of the experiment in the high gas environment was smooth and continuous, without any explosion. The PAWE is easy to move and operate, but the nozzle which was worn badly in the sprayer should be changed every 8 minutes.
