Given the speed requirements of a mechanical press slider, a differential gear train is adopted instead of the belt and gear drive of a general mechanical press. Two electric motors are used to drive the differential ...Given the speed requirements of a mechanical press slider, a differential gear train is adopted instead of the belt and gear drive of a general mechanical press. Two electric motors are used to drive the differential gear train with hybrid input. Based on the working principle of a differential gear train, the angular speed equations and the power dis- tribution equations of the input-output system are established. By controlling the angular speeds of the two motors, the slider can move at different speeds. Taken a JH23-100 type mechanical press as example, the driving system is designed and the power of two motors determined. The simulated results show that the highest slider speed in the mechanical press approaches 39 mm/s only at the forging-punching stage, far less than the 232 mm/s of a general JH23-100 type mechanical press. This provides a new scheme to realize low-speed forging-punching technology from a mechanical press.展开更多
A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. The vehicle load zones were dynamically divided into several zones by several torque lines to indicate the drivers deman...A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. The vehicle load zones were dynamically divided into several zones by several torque lines to indicate the drivers demand and the high or low efficient operating areas of the diesel engine. The fuzzy logic controller with trapezoid membership function and Mamdani rule reference mechanism was utilized. There are over 100 rules used in this fuzzy-based torque distribution strategy which are sorted into four rule-bases. The fuel economy and acceleration tests were designed to test and validate the integrated starter/generator (ISG) bus perfor-mance using fuzzy-based torque distribution strategy. The fuel economy is improved 7.7% compared with the rule-based strategy. Finally the road test results reveal that there is about 15% improvement of fuel economy. And the 0-50 km/h acceleration time is 9.5% shorter than the original bus.展开更多
The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and...The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and hybrid vehicle are applied： FLMC （Fuzzy Logic Mode Control）, SLMC （Sliding Mode Control）, NRMC （Neural Regulator Control）, and Direct Power and Torque Control for Space Vector Modulated inverter （DPTC SVM）. In the special solution of the electric and hybrid vehicle are also applied a Random Switching Frequency Modulation. The control of hybrid vehicle should assure the realization of established transport-assignments in the definite time, at the optimum of energy consumption. One can this realize using. The multi criteria control system. Some results of the computer simulations are presented in the paper. Results of numerical calculation were verified for laboratory model of the electric and hybrid wheel vehicles traction motor.展开更多
Electmmechanical coupling system is one of the key technologies of hybrid electric vehicles. Among the existing electromechanical coupling systems, ISG system is recognized as the most practical one with the highest i...Electmmechanical coupling system is one of the key technologies of hybrid electric vehicles. Among the existing electromechanical coupling systems, ISG system is recognized as the most practical one with the highest integration. However, the efficiency of ISG system is relatively low in pure-motor-drive mode. In this paper, a hybrid drivetrain with double clutches was proposed, in which a mode-clutch was installed between engine and motor as the mode switch, thus the efficiency in pure-motor-drive mode was improved. This paper discussed the architecture, modeling and control strategy of double-clutch drivetrain. The results of co-simulation by Cruise and Simulink showed that the fuel economy of the vehicle with this drivetrain was effectively improved compared to similar conventional vehicles.展开更多
The performance of the power assist, global optimization solved by dynamic programming （DP） method, Chery and Insight control strategies are analyzed using the mild parallel hybrid electric vehicle （PHEV） model ba...The performance of the power assist, global optimization solved by dynamic programming （DP） method, Chery and Insight control strategies are analyzed using the mild parallel hybrid electric vehicle （PHEV） model based on Insight structure. The influence of the four control strategies to the load power of the electric motor system used on parallel hybrid electric vehicle is studied. It is found that 80 percent of the motor load power points are under 1/5 of the electric peak power. The motor load power of the power assist control strategy is distributed in the widest range during generating operation, and the motor load power of the global optimization control strategy has the smallest one.展开更多
The design and construction of an experimental solar hybrid vehicle based on the combination of photovoltaic solar energy as the main source of electricity and electric power supplied by a generator activated by the d...The design and construction of an experimental solar hybrid vehicle based on the combination of photovoltaic solar energy as the main source of electricity and electric power supplied by a generator activated by the driver＇s pedaling is introduced. The vehicle has a battery to store the energy provided by both systems. The development was motivated by a Latin American solar car race through the Atacama Desert in Chile and the initiative to promote the use of clean energy for transport. A general description of the vehicle, its energetic aspects and experimental results are presented.展开更多
文摘Given the speed requirements of a mechanical press slider, a differential gear train is adopted instead of the belt and gear drive of a general mechanical press. Two electric motors are used to drive the differential gear train with hybrid input. Based on the working principle of a differential gear train, the angular speed equations and the power dis- tribution equations of the input-output system are established. By controlling the angular speeds of the two motors, the slider can move at different speeds. Taken a JH23-100 type mechanical press as example, the driving system is designed and the power of two motors determined. The simulated results show that the highest slider speed in the mechanical press approaches 39 mm/s only at the forging-punching stage, far less than the 232 mm/s of a general JH23-100 type mechanical press. This provides a new scheme to realize low-speed forging-punching technology from a mechanical press.
文摘A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. The vehicle load zones were dynamically divided into several zones by several torque lines to indicate the drivers demand and the high or low efficient operating areas of the diesel engine. The fuzzy logic controller with trapezoid membership function and Mamdani rule reference mechanism was utilized. There are over 100 rules used in this fuzzy-based torque distribution strategy which are sorted into four rule-bases. The fuel economy and acceleration tests were designed to test and validate the integrated starter/generator (ISG) bus perfor-mance using fuzzy-based torque distribution strategy. The fuel economy is improved 7.7% compared with the rule-based strategy. Finally the road test results reveal that there is about 15% improvement of fuel economy. And the 0-50 km/h acceleration time is 9.5% shorter than the original bus.
文摘The mathematical model of the modem induction traction motor （TRIM and cutting magnetic circuit traction motor）, supplied with IPM inverter with different control technique is presented in the paper. In electric and hybrid vehicle are applied： FLMC （Fuzzy Logic Mode Control）, SLMC （Sliding Mode Control）, NRMC （Neural Regulator Control）, and Direct Power and Torque Control for Space Vector Modulated inverter （DPTC SVM）. In the special solution of the electric and hybrid vehicle are also applied a Random Switching Frequency Modulation. The control of hybrid vehicle should assure the realization of established transport-assignments in the definite time, at the optimum of energy consumption. One can this realize using. The multi criteria control system. Some results of the computer simulations are presented in the paper. Results of numerical calculation were verified for laboratory model of the electric and hybrid wheel vehicles traction motor.
文摘Electmmechanical coupling system is one of the key technologies of hybrid electric vehicles. Among the existing electromechanical coupling systems, ISG system is recognized as the most practical one with the highest integration. However, the efficiency of ISG system is relatively low in pure-motor-drive mode. In this paper, a hybrid drivetrain with double clutches was proposed, in which a mode-clutch was installed between engine and motor as the mode switch, thus the efficiency in pure-motor-drive mode was improved. This paper discussed the architecture, modeling and control strategy of double-clutch drivetrain. The results of co-simulation by Cruise and Simulink showed that the fuel economy of the vehicle with this drivetrain was effectively improved compared to similar conventional vehicles.
文摘The performance of the power assist, global optimization solved by dynamic programming （DP） method, Chery and Insight control strategies are analyzed using the mild parallel hybrid electric vehicle （PHEV） model based on Insight structure. The influence of the four control strategies to the load power of the electric motor system used on parallel hybrid electric vehicle is studied. It is found that 80 percent of the motor load power points are under 1/5 of the electric peak power. The motor load power of the power assist control strategy is distributed in the widest range during generating operation, and the motor load power of the global optimization control strategy has the smallest one.
文摘The design and construction of an experimental solar hybrid vehicle based on the combination of photovoltaic solar energy as the main source of electricity and electric power supplied by a generator activated by the driver＇s pedaling is introduced. The vehicle has a battery to store the energy provided by both systems. The development was motivated by a Latin American solar car race through the Atacama Desert in Chile and the initiative to promote the use of clean energy for transport. A general description of the vehicle, its energetic aspects and experimental results are presented.
