The mixing time of impact zone in liquid-continuous impinging streams reactor(LISR) is theoretically calculated by empirical model and modern micromixing model of the fluid mixing process, and the variation laws of ma...The mixing time of impact zone in liquid-continuous impinging streams reactor(LISR) is theoretically calculated by empirical model and modern micromixing model of the fluid mixing process, and the variation laws of macromixing time and micromixing time are quantitatively discussed. The results show that under a continuous and stable operating condition, as the paddle speed increases, the macromixing time and micromixing time calculated by the two models both decrease, even in a linkage equilibrium state. Simultaneously, as the paddle speed increases, the results figured by the two models tend to be consistent. It indicates that two models both are more suitable for calculation of mixing time in high paddle speed. Compared with the existing experimental results of this type of reactor, the mixing time computed in the speed of 1500 r/min is closer to it. These conclusions can provide an important reference for systematically studying the strengthening mechanism of LISR under continuous mixing conditions.展开更多
Generally, in the literature, the hydrodynamic behavior of an EGSB （expanded granular sludge bed） reactor is considered as a complete mix reactor. Few works study in detail the flow of such reactors. The aim of this...Generally, in the literature, the hydrodynamic behavior of an EGSB （expanded granular sludge bed） reactor is considered as a complete mix reactor. Few works study in detail the flow of such reactors. The aim of this work was to study, in detail, the hydrodynamics of an EGSB reactor and to propose a mathematical model to describe its flow. A 3.04 L reactor was used with HRT （hydraulic retention time） of 12 h, affluent flowrate of 4 mL·min^-1, and the recirculation flow rate was changed to study three different upflow velocities in the tube （6, 8 and 10 m·h^-1. The pulse input method was used, with the use of blue dextran as tracer. In order to consider the dimensional differences between the tube and the separator, the reactor was divided into two regions （tube and separator）. Initially, a model with two tubular reactors with dispersion in series was proposed and the Peclet number was adjusted for the two regions. It was observed that the region of the tube shows the behavior of a tubular reactor with high dispersion, whereas the region of the separator shows the behavior of a complete mix reactor. In order to simplify the equation, and by knowing that the concentration profile along the reactor was almost constant, a model of two CSTRs （continuous stirred tank reactors） was proposed in series and the number of reactors （N） was set. The best combination was five CSTRs, three in the tube region and two in the separator region. The presented models were equivalent and can be used to describe the hydrodynamic behavior of the EGSB reactor.展开更多
Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of ...Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of biomass waste resulted from fuels bio-components production. A decrease of oxygen and water steam demand in feed for POX process was observed in this variant. Catalytic effect of iron nanoparticles or nickel nitrate as catalysts in improvement of the pilot plant biomass/oil partial oxidation was investigated as well. Presence of catalyst in the feed supports formation of carbon monoxide and suppression content of methane in the gas product. Experimental data were well compared with process simulation based on eauilibrium reactor model.展开更多
基金Project(51276131)supported by the National Natural Science Foundation of ChinaProject(ZRZ0316)supported by the Natural Science Foundation of Hubei Province,ChinaProject(2013070104010025)supported by the Morning Glory Project of Wuhan Science and Technology Bureau,China
文摘The mixing time of impact zone in liquid-continuous impinging streams reactor(LISR) is theoretically calculated by empirical model and modern micromixing model of the fluid mixing process, and the variation laws of macromixing time and micromixing time are quantitatively discussed. The results show that under a continuous and stable operating condition, as the paddle speed increases, the macromixing time and micromixing time calculated by the two models both decrease, even in a linkage equilibrium state. Simultaneously, as the paddle speed increases, the results figured by the two models tend to be consistent. It indicates that two models both are more suitable for calculation of mixing time in high paddle speed. Compared with the existing experimental results of this type of reactor, the mixing time computed in the speed of 1500 r/min is closer to it. These conclusions can provide an important reference for systematically studying the strengthening mechanism of LISR under continuous mixing conditions.
文摘Generally, in the literature, the hydrodynamic behavior of an EGSB （expanded granular sludge bed） reactor is considered as a complete mix reactor. Few works study in detail the flow of such reactors. The aim of this work was to study, in detail, the hydrodynamics of an EGSB reactor and to propose a mathematical model to describe its flow. A 3.04 L reactor was used with HRT （hydraulic retention time） of 12 h, affluent flowrate of 4 mL·min^-1, and the recirculation flow rate was changed to study three different upflow velocities in the tube （6, 8 and 10 m·h^-1. The pulse input method was used, with the use of blue dextran as tracer. In order to consider the dimensional differences between the tube and the separator, the reactor was divided into two regions （tube and separator）. Initially, a model with two tubular reactors with dispersion in series was proposed and the Peclet number was adjusted for the two regions. It was observed that the region of the tube shows the behavior of a tubular reactor with high dispersion, whereas the region of the separator shows the behavior of a complete mix reactor. In order to simplify the equation, and by knowing that the concentration profile along the reactor was almost constant, a model of two CSTRs （continuous stirred tank reactors） was proposed in series and the number of reactors （N） was set. The best combination was five CSTRs, three in the tube region and two in the separator region. The presented models were equivalent and can be used to describe the hydrodynamic behavior of the EGSB reactor.
文摘Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of biomass waste resulted from fuels bio-components production. A decrease of oxygen and water steam demand in feed for POX process was observed in this variant. Catalytic effect of iron nanoparticles or nickel nitrate as catalysts in improvement of the pilot plant biomass/oil partial oxidation was investigated as well. Presence of catalyst in the feed supports formation of carbon monoxide and suppression content of methane in the gas product. Experimental data were well compared with process simulation based on eauilibrium reactor model.
