In this paper, hybrid model is given, practical significance is discussed. because for liquidity constraints, a part of Chinese peasants household only expend current income, their behavior is adapted for abstract inc...In this paper, hybrid model is given, practical significance is discussed. because for liquidity constraints, a part of Chinese peasants household only expend current income, their behavior is adapted for abstract income hypothesis, and the other peasants household expend permanent income, their behavior is adapted for LC PIH.展开更多
Lane line detection is a fundamental step in applications like autonomous driving and intelligent traffic monitoring. Emerging applications today have higher requirements for accurate lane detection. In this paper, we...Lane line detection is a fundamental step in applications like autonomous driving and intelligent traffic monitoring. Emerging applications today have higher requirements for accurate lane detection. In this paper, we present a precise information extraction algorithm for lane lines. Specifically, with Gaussian Mixture Model(GMM), we solved the issue of lane line occlusion in multi-lane scenes. Then, Progressive Probabilistic Hough Transform(PPHT) was used for line segments detection. After K-Means clustering for line segments classification, we solved the problem of extracting precise information that includes left and right edges as well as endpoints of each lane line based on geometric characteristics. Finally, we fitted these solid and dashed lane lines respectively. Experimental results indicate that the proposed method performs better than the other methods in both single-lane and multi-lane scenarios.展开更多
An up-conversion mixer implemented in a 0.35μm SiGe BiCMOS technology for a double conversion cable TV tuner is described, The mixer converts the 100MHz to 1000MHz band to the Intermediate Frequency of 1GHz above. Th...An up-conversion mixer implemented in a 0.35μm SiGe BiCMOS technology for a double conversion cable TV tuner is described, The mixer converts the 100MHz to 1000MHz band to the Intermediate Frequency of 1GHz above. The mixer meets the linearity and noise figure requirements for a TV tuner. The noise figure （IF） of 19.2-17.5dB, ldB compression of 12.1dBm, and gain of-1-0.7dB in the 900MHz band are achieved at a supply voltage of 5V. The power consumption is 47mW.展开更多
Buffaloes （Bubalus bubalis） are widely distributed and were introduced to Brazil in 1895. Most of the molecular genetic characterization of buffaloes has been done with cross-specific （cattle） markers, but few of ...Buffaloes （Bubalus bubalis） are widely distributed and were introduced to Brazil in 1895. Most of the molecular genetic characterization of buffaloes has been done with cross-specific （cattle） markers, but few of them include Brazilian populations. Nineteen commonly used cattle microsatellites were tested to develop a multiplexed set of microsatellites and characterize Brazilian buffalo. Three PCR mixes were finally developed with the 11 markers that succeed in amplify and were polymorphic （58%）. The average number of alleles was 5.42, with an average observed and expected heterocigozity of 0.441 and 0.695, respectively. As it was expected, Brazilian buffalo variability was lower than the previously reported from the domestication centres （China and India）, but higher than the seriously selected European populations. The exclusion power calculated for the eleven markers in Brazilian buffalo was 0.9999999996, this allows its use in DNA based traceability.展开更多
A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the ac...A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the accuracy and efficiency of the developed CCM were verified reliably, and it was well demonstrated for the external surfaces design of a hypersonic forebody/inlet with nose bluntness. With the help of CCM method, effects of nose bluntness on forebody shock shapes and the flowfield qualities which dominate inlet performance were examined and analyzed on the two-dimensional and axisymmetric configurations. The results showed that blunt effects of a wedge forebody are more substantial than that of related cone cases. For a conical forebody with a properly blunted nose, a recovery of the shock front back to that of corresponding sharp nose is exhibited, accompanied with a gradually fading out of entropy layer effects. Consequently a simplification is thought to be reasonable for an axisymmetric inlet with a proper compression angle, and a blunt nose of limited radius can be idealized as a sharp nose, as the spillage and flow variations at the entrance are negligible, even though the nose scale increases to 10% cowl lip radius. Whereas for two-dimensional inlets, the blunt effects are substantial since not only the inlet capturing/starting capabilities, but also the flow uniformities are obviously degraded.展开更多
Linear mixed models are popularly used to fit continuous longitudinal data, and the random effects are commonly assumed to have normal distribution. However, this assumption needs to be tested so that further analysis...Linear mixed models are popularly used to fit continuous longitudinal data, and the random effects are commonly assumed to have normal distribution. However, this assumption needs to be tested so that further analysis can be proceeded well. In this paper, we consider the Baringhaus-Henze-Epps-Pulley （BHEP） tests, which are based on an empirical characteristic function. Differing from their case, we consider the normality checking for the random effects which are unobservable and the test should be based on their predictors. The test is consistent against global alternatives, and is sensitive to the local alternatives converging to the null at a certain rate arbitrarily close to 1/V~ where n is sample size. ^-hlrthermore, to overcome the problem that the limiting null distribution of the test is not tractable, we suggest a new method： use a conditional Monte Carlo test （CMCT） to approximate the null distribution, and then to simulate p-values. The test is compared with existing methods, the power is examined, and several examples are applied to illustrate the usefulness of our test in the analysis of longitudinal data.展开更多
文摘In this paper, hybrid model is given, practical significance is discussed. because for liquidity constraints, a part of Chinese peasants household only expend current income, their behavior is adapted for abstract income hypothesis, and the other peasants household expend permanent income, their behavior is adapted for LC PIH.
基金supported by the National Nature Science Foundation of China under Grant No.61502226the Jiangsu Provincial Transportation Science and Technology Project No.2017X04the Fundamental Research Funds for the Central Universities
文摘Lane line detection is a fundamental step in applications like autonomous driving and intelligent traffic monitoring. Emerging applications today have higher requirements for accurate lane detection. In this paper, we present a precise information extraction algorithm for lane lines. Specifically, with Gaussian Mixture Model(GMM), we solved the issue of lane line occlusion in multi-lane scenes. Then, Progressive Probabilistic Hough Transform(PPHT) was used for line segments detection. After K-Means clustering for line segments classification, we solved the problem of extracting precise information that includes left and right edges as well as endpoints of each lane line based on geometric characteristics. Finally, we fitted these solid and dashed lane lines respectively. Experimental results indicate that the proposed method performs better than the other methods in both single-lane and multi-lane scenarios.
基金Supported by the National Natural Science Foundation of China (No.90207008).
文摘An up-conversion mixer implemented in a 0.35μm SiGe BiCMOS technology for a double conversion cable TV tuner is described, The mixer converts the 100MHz to 1000MHz band to the Intermediate Frequency of 1GHz above. The mixer meets the linearity and noise figure requirements for a TV tuner. The noise figure （IF） of 19.2-17.5dB, ldB compression of 12.1dBm, and gain of-1-0.7dB in the 900MHz band are achieved at a supply voltage of 5V. The power consumption is 47mW.
文摘Buffaloes （Bubalus bubalis） are widely distributed and were introduced to Brazil in 1895. Most of the molecular genetic characterization of buffaloes has been done with cross-specific （cattle） markers, but few of them include Brazilian populations. Nineteen commonly used cattle microsatellites were tested to develop a multiplexed set of microsatellites and characterize Brazilian buffalo. Three PCR mixes were finally developed with the 11 markers that succeed in amplify and were polymorphic （58%）. The average number of alleles was 5.42, with an average observed and expected heterocigozity of 0.441 and 0.695, respectively. As it was expected, Brazilian buffalo variability was lower than the previously reported from the domestication centres （China and India）, but higher than the seriously selected European populations. The exclusion power calculated for the eleven markers in Brazilian buffalo was 0.9999999996, this allows its use in DNA based traceability.
基金supported by the National Natural Science Foundation of China(Grant Nos.11132010 and 11402263)
文摘A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the accuracy and efficiency of the developed CCM were verified reliably, and it was well demonstrated for the external surfaces design of a hypersonic forebody/inlet with nose bluntness. With the help of CCM method, effects of nose bluntness on forebody shock shapes and the flowfield qualities which dominate inlet performance were examined and analyzed on the two-dimensional and axisymmetric configurations. The results showed that blunt effects of a wedge forebody are more substantial than that of related cone cases. For a conical forebody with a properly blunted nose, a recovery of the shock front back to that of corresponding sharp nose is exhibited, accompanied with a gradually fading out of entropy layer effects. Consequently a simplification is thought to be reasonable for an axisymmetric inlet with a proper compression angle, and a blunt nose of limited radius can be idealized as a sharp nose, as the spillage and flow variations at the entrance are negligible, even though the nose scale increases to 10% cowl lip radius. Whereas for two-dimensional inlets, the blunt effects are substantial since not only the inlet capturing/starting capabilities, but also the flow uniformities are obviously degraded.
基金supported in part by a grant of Research Grants Council of Hong Kong,and National Natural Science Foundation of China (Grant No. 11101157)
文摘Linear mixed models are popularly used to fit continuous longitudinal data, and the random effects are commonly assumed to have normal distribution. However, this assumption needs to be tested so that further analysis can be proceeded well. In this paper, we consider the Baringhaus-Henze-Epps-Pulley （BHEP） tests, which are based on an empirical characteristic function. Differing from their case, we consider the normality checking for the random effects which are unobservable and the test should be based on their predictors. The test is consistent against global alternatives, and is sensitive to the local alternatives converging to the null at a certain rate arbitrarily close to 1/V~ where n is sample size. ^-hlrthermore, to overcome the problem that the limiting null distribution of the test is not tractable, we suggest a new method： use a conditional Monte Carlo test （CMCT） to approximate the null distribution, and then to simulate p-values. The test is compared with existing methods, the power is examined, and several examples are applied to illustrate the usefulness of our test in the analysis of longitudinal data.
