Polydimethylsiloxane (PDMS), tetraethoxysilane (TEOS), ethyl alcohol (EtOH) and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method. The effect of the cont...Polydimethylsiloxane (PDMS), tetraethoxysilane (TEOS), ethyl alcohol (EtOH) and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method. The effect of the contents of H2O and PDMS on thin films was studied. When the volume ratio of H20 to TEOS is 0.5, the optimum quality of thin films is obtained. And the gelation time is affected slightly by H20 content. Uniform thin films are obtained when the volume ratio of PDMS to TEOS is 0.2. Yet, the sol would be inactive in 6 d. Various properties of thin films were studied, including hardness, adhesive quality, hydrophobic property, corrosion protection property, and abrasion resistance. Test results show that the pencil hardness is generally 3-6 H, and adhesive quality achieves the highest standard of 0. When the sintering temperature is below 400℃, the contact angle is about 95° and hydrophobic films are obtained. The abrasion resistance of thin films is better than that of aluminum alloy when the sintering temperature is higher than 300℃. And the excellent corrosion protective effect is obtained by single-layer coating when the sintering temperature is higher than 400℃.展开更多
In this paper,we propose a hybrid power model that includes the power consumption of not only the registers but also part of the combinational logic.By doing knownkey analysis with this hybrid model,power side-channel...In this paper,we propose a hybrid power model that includes the power consumption of not only the registers but also part of the combinational logic.By doing knownkey analysis with this hybrid model,power side-channel leakage caused by correct keys can be detected.In experiment,PRINTcipher and DES algorithms were chosen as analysis targets and combinational logic s-box unit was selected to build power template.The analysis results showed the signal-to-noise ratio(SNR) power consumption increase of more than 20%after considering s-box's power consumption so that the information of keys can be obtained with just half number of power traces.In addition,the side channel-leakage detection capability of our method also shows better effectiveness that can identify the correct keys.展开更多
基金supported partly by the School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong university,China
文摘Polydimethylsiloxane (PDMS), tetraethoxysilane (TEOS), ethyl alcohol (EtOH) and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method. The effect of the contents of H2O and PDMS on thin films was studied. When the volume ratio of H20 to TEOS is 0.5, the optimum quality of thin films is obtained. And the gelation time is affected slightly by H20 content. Uniform thin films are obtained when the volume ratio of PDMS to TEOS is 0.2. Yet, the sol would be inactive in 6 d. Various properties of thin films were studied, including hardness, adhesive quality, hydrophobic property, corrosion protection property, and abrasion resistance. Test results show that the pencil hardness is generally 3-6 H, and adhesive quality achieves the highest standard of 0. When the sintering temperature is below 400℃, the contact angle is about 95° and hydrophobic films are obtained. The abrasion resistance of thin films is better than that of aluminum alloy when the sintering temperature is higher than 300℃. And the excellent corrosion protective effect is obtained by single-layer coating when the sintering temperature is higher than 400℃.
基金supported by Major State Basic Research Development Program(No. 2013CB338004)National Natural Science Foundation of China(No.61402286, 61472250,61472249,61202372)+1 种基金National Science and Technology Major Project of the Ministry of Science and Technology of China (No.2014ZX01032401-001)Plan of Action for the Innovation of Science and Technology of Shanghai Municipal Science and Technology Commission(No.14511100300)
文摘In this paper,we propose a hybrid power model that includes the power consumption of not only the registers but also part of the combinational logic.By doing knownkey analysis with this hybrid model,power side-channel leakage caused by correct keys can be detected.In experiment,PRINTcipher and DES algorithms were chosen as analysis targets and combinational logic s-box unit was selected to build power template.The analysis results showed the signal-to-noise ratio(SNR) power consumption increase of more than 20%after considering s-box's power consumption so that the information of keys can be obtained with just half number of power traces.In addition,the side channel-leakage detection capability of our method also shows better effectiveness that can identify the correct keys.