For those refineries which have to deal with different types of crude oil, blending is an attractive solution to obtain a quality feedstock. In this paper, a novel scheduling strategy is proposed for a practical crude...For those refineries which have to deal with different types of crude oil, blending is an attractive solution to obtain a quality feedstock. In this paper, a novel scheduling strategy is proposed for a practical crude oil blending process. The objective is to keep the property of feedstock, mainly described by the true boiling point (TBP) data, consistent and suitable. Firstly, the mathematical model is established. Then, a heuristically initialized hybrid iterative (HIHI) algorithm based on a two-level optimization structure, in which tabu search (TS) and differential evolution (DE) are used for upper-level and lower-level optimization, respectively, is proposed to get the model solution. Finally, the effectiveness and efficiency of the scheduling strategy is validated via real data from a certain refinery.展开更多
To cope with the task scheduling problem under multi-task and transportation consideration in large-scale service oriented manufacturing systems(SOMS), a service allocation optimization mathematical model was establis...To cope with the task scheduling problem under multi-task and transportation consideration in large-scale service oriented manufacturing systems(SOMS), a service allocation optimization mathematical model was established, and then a hybrid discrete particle swarm optimization-genetic algorithm(HDPSOGA) was proposed. In SOMS, each resource involved in the whole life cycle of a product, whether it is provided by a piece of software or a hardware device, is encapsulated into a service. So, the transportation during production of a task should be taken into account because the hard-services selected are possibly provided by various providers in different areas. In the service allocation optimization mathematical model, multi-task and transportation were considered simultaneously. In the proposed HDPSOGA algorithm, integer coding method was applied to establish the mapping between the particle location matrix and the service allocation scheme. The position updating process was performed according to the cognition part, the social part, and the previous velocity and position while introducing the crossover and mutation idea of genetic algorithm to fit the discrete space. Finally, related simulation experiments were carried out to compare with other two previous algorithms. The results indicate the effectiveness and efficiency of the proposed hybrid algorithm.展开更多
A new equation for predicting surface tension is proposed based on the thermodynamic definition of surface tension and the expression of the Gibbs free energy of the system. Using the NRTL equation to represent the ex...A new equation for predicting surface tension is proposed based on the thermodynamic definition of surface tension and the expression of the Gibbs free energy of the system. Using the NRTL equation to represent the excess Gibbs free energy, a two-parameter surface tension equation is derived. The feasibility of the new equation has been tested in terms of 124 binary and 16 multicomponent systems(13-ternary and 3-quaternary) with absolute relative deviations of 0.59% and 1.55% respectively. This model is also predictive for the temperature dependence of surface tension of liquid mixtures. It is shown that, with good accuracy, this equation is simple and reliable for practical use.展开更多
A release model for diffusion-controlled monolithic matrix coated with outer membrane system is proposed and solved by using the refined double integral method. The calculated results are in satisfactory agreement wit...A release model for diffusion-controlled monolithic matrix coated with outer membrane system is proposed and solved by using the refined double integral method. The calculated results are in satisfactory agreement with the experimental release data. The present model can be well used to describe the release process for all cd/cs values. In addition, the release effects of the monolithic matrix coated with outer membrane system are discussed theoretically.展开更多
The biggest insufficiency of the present mathematics is that it consists, in fact, of the eclectic mixture of two different models. In the first model, the world is taken as infinity and what is chosen as an element h...The biggest insufficiency of the present mathematics is that it consists, in fact, of the eclectic mixture of two different models. In the first model, the world is taken as infinity and what is chosen as an element here is the unit. Everything is measured by the multiples of the unit. According to the second model, this world is in unity and its mathematical manifestation is the unit. The world is between zero and one. Everything here is measured by fraction The simplified variants of the mathematical model of the world paves the way for the comparative analysis of its alternative philosophical interpretations.展开更多
Based on the study of supply chain(SC) and SC optimization in engineering projects, a mixed integer nonlinear programming(MINLP) optimization model is developed to minimize the total SC cost for international petroche...Based on the study of supply chain(SC) and SC optimization in engineering projects, a mixed integer nonlinear programming(MINLP) optimization model is developed to minimize the total SC cost for international petrochemical engineering projects. A steam cracking project is selected and analyzed, from which typical SC characteristics in international engineering projects in the area of petrochemical industry are summarized. The MINLP model is therefore developed and applied to projects with detailed data. The optimization results are analyzed and compared by the MINLP model, indicating that they are appropriate to SC management practice in engineering projects, and are consistent with the optimal priceeffective strategy in procurement. As a result, the model could provide useful guidance to SC optimization of international engineering projects in petrochemical industry, and improve SC management by selecting more reliable and qualified partner enterprises in SC for the project.展开更多
Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly ...Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly because use working fluids that do not cause ozone depletion and can reduce the global warming emissions.The hybrid heat pump processes combine the conventional vapor-compression and the absorption heat pump cycles.Studies about the simulations and modeling of hybrid heat pumps are few in literature.In this research a mathematical model for single effect absorption and hybrid heat pump is carried out with Chem Cad? 6.0.1.LiBr–H_2O is used as working fluid while electrolytic NRTL and electrolytes latent heat are used as thermodynamic model due to the better results.Binary parameters of activity coef ficients are regressed from experimental vapor pressure data while default constants are used for the solubility expressions.A design of heat pumps is developed and a new modeling of generator is analyzed.The coef ficient of performance of absorption heat pump and hybrid heat pump is equal to 0.7 and 0.83 respectively.For absorption heat pump a sensitivity analysis is carried out to evaluate the effect of temperature and pressure generator,the concentration of Li–Br solution on coef ficient of performance,cooling capacity and working fluid temperature.For hybrid heat pump,the different coef ficients of performance,the primary energy ratio,the generator heat,and the compressor power are analyzed for different values of compressor proportion.Results show that comparing the two systems the hybrid pump allows to save more primary energy,costs and carbon dioxide emissions with respect to absorption heat pump with the increasing of compressor proportion parameter.Future researches should focus on the construction of this heat pumps integrated in chemical processes as a biogas plant or trigeneration systems.展开更多
In order to expand the natural energy and the energy conservation, ＂the smart PV （photovoltaic power generation） ＆ EV （electric vehicle） system＂ has been proposed and the effect has been clarified. In the smart...In order to expand the natural energy and the energy conservation, ＂the smart PV （photovoltaic power generation） ＆ EV （electric vehicle） system＂ has been proposed and the effect has been clarified. In the smart PV ＆ EV system, it is important that electric vehicles become popular. Therefore, the AI-EV （air-conditioner integrated electric vehicle） has been proposed. In this paper, the AI-EV is designed based on the required car air-conditioner capacity. And, the value of AI-EV is compared with a gasoline vehicle, HV （hybrid vehicle） and EV using the mathematical simulation model As a result, it is clarified that the minimum displacement of the small-engine is 120 cc for AI-EV. In the smart PV ＆ EV system, AI-EV can reduce CO_2 emissions by 20% almost the same as EV. Additionally, AI-EV is able to gain the cruising range more than twice as long as EV.展开更多
This paper introduces a new type machine for polyblends with excellent mixing capabilities of internal mixer and continuous molding character of extruder.The machine includes two functions - mixing and extrusion moldi...This paper introduces a new type machine for polyblends with excellent mixing capabilities of internal mixer and continuous molding character of extruder.The machine includes two functions - mixing and extrusion molding that have been composed together by rational design,so a tandem production mode - "batch + continuous" are opened up.The mathematical model of continuous mixing molding was established and verified availably by experimental research.The main physical mechanical property of vulcanizate,which had met national waterproof material standard,verified the machine practicability.The essential difference from other similar type machines is that this machine is not only suitable in producing granular and powder rubbers but also lumpish rubbers.展开更多
A mathematic model is developed for the perovskite-type mixed ionic-electronic conducting(MIEC) membrane,which makes it possible to simulate the process of oxygen separation in the U-shaped Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_...A mathematic model is developed for the perovskite-type mixed ionic-electronic conducting(MIEC) membrane,which makes it possible to simulate the process of oxygen separation in the U-shaped Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_3-δhollow-fiber membrane. The model correlates the oxygen permeation flux to the measurable variables. The trends of calculated results for purge operation coincide well with the experimental data, therefore the model is considerable for flux prediction under vacuum operation. Higher oxygen separation efficiency can be achieved with vacuum operation than purge operation. Parameter study with vacuum operation reveals that oxygen permeation flux increases with higher vacuum levels, and vacuum pressure of around 1.013 × 10~3 Pa is the optimal.Also, vacuum operation on the lumen side is much more efficient to achieve higher oxygen permeation flux compared with compression mode on the shell side.展开更多
Generally, in the literature, the hydrodynamic behavior of an EGSB （expanded granular sludge bed） reactor is considered as a complete mix reactor. Few works study in detail the flow of such reactors. The aim of this...Generally, in the literature, the hydrodynamic behavior of an EGSB （expanded granular sludge bed） reactor is considered as a complete mix reactor. Few works study in detail the flow of such reactors. The aim of this work was to study, in detail, the hydrodynamics of an EGSB reactor and to propose a mathematical model to describe its flow. A 3.04 L reactor was used with HRT （hydraulic retention time） of 12 h, affluent flowrate of 4 mL·min^-1, and the recirculation flow rate was changed to study three different upflow velocities in the tube （6, 8 and 10 m·h^-1. The pulse input method was used, with the use of blue dextran as tracer. In order to consider the dimensional differences between the tube and the separator, the reactor was divided into two regions （tube and separator）. Initially, a model with two tubular reactors with dispersion in series was proposed and the Peclet number was adjusted for the two regions. It was observed that the region of the tube shows the behavior of a tubular reactor with high dispersion, whereas the region of the separator shows the behavior of a complete mix reactor. In order to simplify the equation, and by knowing that the concentration profile along the reactor was almost constant, a model of two CSTRs （continuous stirred tank reactors） was proposed in series and the number of reactors （N） was set. The best combination was five CSTRs, three in the tube region and two in the separator region. The presented models were equivalent and can be used to describe the hydrodynamic behavior of the EGSB reactor.展开更多
基金Supported by the National High Technology Research and Development Program of China （2007AA04Z193） the National Natural Science Foundation of China （60974008 60704032）
文摘For those refineries which have to deal with different types of crude oil, blending is an attractive solution to obtain a quality feedstock. In this paper, a novel scheduling strategy is proposed for a practical crude oil blending process. The objective is to keep the property of feedstock, mainly described by the true boiling point (TBP) data, consistent and suitable. Firstly, the mathematical model is established. Then, a heuristically initialized hybrid iterative (HIHI) algorithm based on a two-level optimization structure, in which tabu search (TS) and differential evolution (DE) are used for upper-level and lower-level optimization, respectively, is proposed to get the model solution. Finally, the effectiveness and efficiency of the scheduling strategy is validated via real data from a certain refinery.
基金Project(2012B091100444)supported by the Production,Education and Research Cooperative Program of Guangdong Province and Ministry of Education,ChinaProject(2013ZM0091)supported by Fundamental Research Funds for the Central Universities of China
文摘To cope with the task scheduling problem under multi-task and transportation consideration in large-scale service oriented manufacturing systems(SOMS), a service allocation optimization mathematical model was established, and then a hybrid discrete particle swarm optimization-genetic algorithm(HDPSOGA) was proposed. In SOMS, each resource involved in the whole life cycle of a product, whether it is provided by a piece of software or a hardware device, is encapsulated into a service. So, the transportation during production of a task should be taken into account because the hard-services selected are possibly provided by various providers in different areas. In the service allocation optimization mathematical model, multi-task and transportation were considered simultaneously. In the proposed HDPSOGA algorithm, integer coding method was applied to establish the mapping between the particle location matrix and the service allocation scheme. The position updating process was performed according to the cognition part, the social part, and the previous velocity and position while introducing the crossover and mutation idea of genetic algorithm to fit the discrete space. Finally, related simulation experiments were carried out to compare with other two previous algorithms. The results indicate the effectiveness and efficiency of the proposed hybrid algorithm.
基金the Scientific Research Foundation of the State Education Ministry for Returned Overseas Chinese Scholar.
文摘A new equation for predicting surface tension is proposed based on the thermodynamic definition of surface tension and the expression of the Gibbs free energy of the system. Using the NRTL equation to represent the excess Gibbs free energy, a two-parameter surface tension equation is derived. The feasibility of the new equation has been tested in terms of 124 binary and 16 multicomponent systems(13-ternary and 3-quaternary) with absolute relative deviations of 0.59% and 1.55% respectively. This model is also predictive for the temperature dependence of surface tension of liquid mixtures. It is shown that, with good accuracy, this equation is simple and reliable for practical use.
文摘A release model for diffusion-controlled monolithic matrix coated with outer membrane system is proposed and solved by using the refined double integral method. The calculated results are in satisfactory agreement with the experimental release data. The present model can be well used to describe the release process for all cd/cs values. In addition, the release effects of the monolithic matrix coated with outer membrane system are discussed theoretically.
文摘The biggest insufficiency of the present mathematics is that it consists, in fact, of the eclectic mixture of two different models. In the first model, the world is taken as infinity and what is chosen as an element here is the unit. Everything is measured by the multiples of the unit. According to the second model, this world is in unity and its mathematical manifestation is the unit. The world is between zero and one. Everything here is measured by fraction The simplified variants of the mathematical model of the world paves the way for the comparative analysis of its alternative philosophical interpretations.
文摘Based on the study of supply chain(SC) and SC optimization in engineering projects, a mixed integer nonlinear programming(MINLP) optimization model is developed to minimize the total SC cost for international petrochemical engineering projects. A steam cracking project is selected and analyzed, from which typical SC characteristics in international engineering projects in the area of petrochemical industry are summarized. The MINLP model is therefore developed and applied to projects with detailed data. The optimization results are analyzed and compared by the MINLP model, indicating that they are appropriate to SC management practice in engineering projects, and are consistent with the optimal priceeffective strategy in procurement. As a result, the model could provide useful guidance to SC optimization of international engineering projects in petrochemical industry, and improve SC management by selecting more reliable and qualified partner enterprises in SC for the project.
文摘Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly because use working fluids that do not cause ozone depletion and can reduce the global warming emissions.The hybrid heat pump processes combine the conventional vapor-compression and the absorption heat pump cycles.Studies about the simulations and modeling of hybrid heat pumps are few in literature.In this research a mathematical model for single effect absorption and hybrid heat pump is carried out with Chem Cad? 6.0.1.LiBr–H_2O is used as working fluid while electrolytic NRTL and electrolytes latent heat are used as thermodynamic model due to the better results.Binary parameters of activity coef ficients are regressed from experimental vapor pressure data while default constants are used for the solubility expressions.A design of heat pumps is developed and a new modeling of generator is analyzed.The coef ficient of performance of absorption heat pump and hybrid heat pump is equal to 0.7 and 0.83 respectively.For absorption heat pump a sensitivity analysis is carried out to evaluate the effect of temperature and pressure generator,the concentration of Li–Br solution on coef ficient of performance,cooling capacity and working fluid temperature.For hybrid heat pump,the different coef ficients of performance,the primary energy ratio,the generator heat,and the compressor power are analyzed for different values of compressor proportion.Results show that comparing the two systems the hybrid pump allows to save more primary energy,costs and carbon dioxide emissions with respect to absorption heat pump with the increasing of compressor proportion parameter.Future researches should focus on the construction of this heat pumps integrated in chemical processes as a biogas plant or trigeneration systems.
文摘In order to expand the natural energy and the energy conservation, ＂the smart PV （photovoltaic power generation） ＆ EV （electric vehicle） system＂ has been proposed and the effect has been clarified. In the smart PV ＆ EV system, it is important that electric vehicles become popular. Therefore, the AI-EV （air-conditioner integrated electric vehicle） has been proposed. In this paper, the AI-EV is designed based on the required car air-conditioner capacity. And, the value of AI-EV is compared with a gasoline vehicle, HV （hybrid vehicle） and EV using the mathematical simulation model As a result, it is clarified that the minimum displacement of the small-engine is 120 cc for AI-EV. In the smart PV ＆ EV system, AI-EV can reduce CO_2 emissions by 20% almost the same as EV. Additionally, AI-EV is able to gain the cruising range more than twice as long as EV.
基金National Natural Science Foundation of China(No.50375075)
文摘This paper introduces a new type machine for polyblends with excellent mixing capabilities of internal mixer and continuous molding character of extruder.The machine includes two functions - mixing and extrusion molding that have been composed together by rational design,so a tandem production mode - "batch + continuous" are opened up.The mathematical model of continuous mixing molding was established and verified availably by experimental research.The main physical mechanical property of vulcanizate,which had met national waterproof material standard,verified the machine practicability.The essential difference from other similar type machines is that this machine is not only suitable in producing granular and powder rubbers but also lumpish rubbers.
基金Supported by the National Science Fund for Distinguished Young Scholars of China(21225625)the Natural Science Foundation of China(21176087)the Specialized Research Fund for the Doctoral Program of Higher Education(20110172110013)
文摘A mathematic model is developed for the perovskite-type mixed ionic-electronic conducting(MIEC) membrane,which makes it possible to simulate the process of oxygen separation in the U-shaped Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_3-δhollow-fiber membrane. The model correlates the oxygen permeation flux to the measurable variables. The trends of calculated results for purge operation coincide well with the experimental data, therefore the model is considerable for flux prediction under vacuum operation. Higher oxygen separation efficiency can be achieved with vacuum operation than purge operation. Parameter study with vacuum operation reveals that oxygen permeation flux increases with higher vacuum levels, and vacuum pressure of around 1.013 × 10~3 Pa is the optimal.Also, vacuum operation on the lumen side is much more efficient to achieve higher oxygen permeation flux compared with compression mode on the shell side.
文摘Generally, in the literature, the hydrodynamic behavior of an EGSB （expanded granular sludge bed） reactor is considered as a complete mix reactor. Few works study in detail the flow of such reactors. The aim of this work was to study, in detail, the hydrodynamics of an EGSB reactor and to propose a mathematical model to describe its flow. A 3.04 L reactor was used with HRT （hydraulic retention time） of 12 h, affluent flowrate of 4 mL·min^-1, and the recirculation flow rate was changed to study three different upflow velocities in the tube （6, 8 and 10 m·h^-1. The pulse input method was used, with the use of blue dextran as tracer. In order to consider the dimensional differences between the tube and the separator, the reactor was divided into two regions （tube and separator）. Initially, a model with two tubular reactors with dispersion in series was proposed and the Peclet number was adjusted for the two regions. It was observed that the region of the tube shows the behavior of a tubular reactor with high dispersion, whereas the region of the separator shows the behavior of a complete mix reactor. In order to simplify the equation, and by knowing that the concentration profile along the reactor was almost constant, a model of two CSTRs （continuous stirred tank reactors） was proposed in series and the number of reactors （N） was set. The best combination was five CSTRs, three in the tube region and two in the separator region. The presented models were equivalent and can be used to describe the hydrodynamic behavior of the EGSB reactor.
