This paper is devoted to investigate the influences of thermal dispersion and magnetic field on a hot semi-infinite vertical porous plate embedded in a saturated Darcy-Forchheimer-Brinkman porous medium. The coefficie...This paper is devoted to investigate the influences of thermal dispersion and magnetic field on a hot semi-infinite vertical porous plate embedded in a saturated Darcy-Forchheimer-Brinkman porous medium. The coefficient of thermal diffusivity has been assumed to be the sum of the molecular diffusivity and the dynamic diffusivity due to mechanical dispersion. The effects of transverse magnetic field parameter (Hartmann number Ha), Reynolds number Re (different velocities), Prandtl number Pr (different types of fluids) and dispersion parameter on the wall shear stress and the heat transfer rate are discussed.展开更多
Waste heat recovery from the flue gas of gasfired boilers was studied experimentally by measuring the flow and heat transfer of air and water through six kinds of packing with saturated humid air as the simulated flue...Waste heat recovery from the flue gas of gasfired boilers was studied experimentally by measuring the flow and heat transfer of air and water through six kinds of packing with saturated humid air as the simulated flue gas.The experiments measured the effects of inlet air temperature, inlet air velocity and circulating water flow rate on the flow and heat transfer. The results show that higher inlet air temperatures and lower inlet air velocities lower the flow resistance and increase the heat transfer coefficient. The stainless steel packing had better surface wettability and larger thermal conductivity than the plastic packing, which enhanced the heat transfer between the water and the saturated moist air. When both the flow resistance reduction and the heat transfer enhancement were considered, the experimental results gave an optimal packing-specific surface area. A packed heat exchanger tower was designed for waste heat recovery from the flue gas of gas-fired boilers based on the experimental results which had better flow and heat transfer characteristics with lower pump and fan power consumption, more stable system operation and less thermal fluctuations compared with a non-packed heat transfer system with atomized water.展开更多
The aim of this paper is to present a continuum model for bioconvection of oxytactic micro-organisms in a non-Darcy porous medium and to investigate the effects of bio- convection and mixed convection on the steady bo...The aim of this paper is to present a continuum model for bioconvection of oxytactic micro-organisms in a non-Darcy porous medium and to investigate the effects of bio- convection and mixed convection on the steady boundary layer flow past a horizontal plate embedded in a porous medium filled with a water-based nanofluid. The governing partial differential equations for momentum, heat, oxygen and micro-organism conser- vation are reduced to a set of nonlinear ordinary differential equations using similarity transformations that are numerically solved using a built-in MATLAB ODE solver. The effects of the bioconvection parameters on the nanofluid fluid properties, nanoparticle concentration and the density of the micro-organism are analyzed. A comparative anal- ysis of our results with those previously reported in the literature is given. Among the significant findings in this study is that bioconvection parameters highly influence beat, mass and motile micro-organism transfer rates.展开更多
文摘This paper is devoted to investigate the influences of thermal dispersion and magnetic field on a hot semi-infinite vertical porous plate embedded in a saturated Darcy-Forchheimer-Brinkman porous medium. The coefficient of thermal diffusivity has been assumed to be the sum of the molecular diffusivity and the dynamic diffusivity due to mechanical dispersion. The effects of transverse magnetic field parameter (Hartmann number Ha), Reynolds number Re (different velocities), Prandtl number Pr (different types of fluids) and dispersion parameter on the wall shear stress and the heat transfer rate are discussed.
基金support extended by the National Basic Research Program of China(2013CB228301)is gratefully acknowledged
文摘Waste heat recovery from the flue gas of gasfired boilers was studied experimentally by measuring the flow and heat transfer of air and water through six kinds of packing with saturated humid air as the simulated flue gas.The experiments measured the effects of inlet air temperature, inlet air velocity and circulating water flow rate on the flow and heat transfer. The results show that higher inlet air temperatures and lower inlet air velocities lower the flow resistance and increase the heat transfer coefficient. The stainless steel packing had better surface wettability and larger thermal conductivity than the plastic packing, which enhanced the heat transfer between the water and the saturated moist air. When both the flow resistance reduction and the heat transfer enhancement were considered, the experimental results gave an optimal packing-specific surface area. A packed heat exchanger tower was designed for waste heat recovery from the flue gas of gas-fired boilers based on the experimental results which had better flow and heat transfer characteristics with lower pump and fan power consumption, more stable system operation and less thermal fluctuations compared with a non-packed heat transfer system with atomized water.
文摘The aim of this paper is to present a continuum model for bioconvection of oxytactic micro-organisms in a non-Darcy porous medium and to investigate the effects of bio- convection and mixed convection on the steady boundary layer flow past a horizontal plate embedded in a porous medium filled with a water-based nanofluid. The governing partial differential equations for momentum, heat, oxygen and micro-organism conser- vation are reduced to a set of nonlinear ordinary differential equations using similarity transformations that are numerically solved using a built-in MATLAB ODE solver. The effects of the bioconvection parameters on the nanofluid fluid properties, nanoparticle concentration and the density of the micro-organism are analyzed. A comparative anal- ysis of our results with those previously reported in the literature is given. Among the significant findings in this study is that bioconvection parameters highly influence beat, mass and motile micro-organism transfer rates.
