期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
高聚物P(EO)_n-CuBr_2薄膜在流体静高压下离子电导率和介电常数的提高(Ⅱ)——添加增塑剂方法的应用(英文) 被引量:1
1
作者 苏昉 戴卫平 苏骁 《高压物理学报》 CAS CSCD 北大核心 2001年第3期161-168,共8页
选用分子量为 5 0 0万的聚氧化乙烯和无水溴化铜 ,通过混溶蒸发法制备出一系列高聚物P(EO) n CuBr2 (n =4 ,8,12 ,16,2 4 )薄膜 ,并在 0 1~ 2 4 4 3MPa范围不同的静水压下详细测量了它们的相对介电常数。分别探讨了增塑剂 (C4 H6O3)... 选用分子量为 5 0 0万的聚氧化乙烯和无水溴化铜 ,通过混溶蒸发法制备出一系列高聚物P(EO) n CuBr2 (n =4 ,8,12 ,16,2 4 )薄膜 ,并在 0 1~ 2 4 4 3MPa范围不同的静水压下详细测量了它们的相对介电常数。分别探讨了增塑剂 (C4 H6O3)含量对室温常压下离子电导率和介电常数的影响 ,及其对高压下离子电导率和介电常数的影响。实验结果表明 :P(EO) 16 CuBr2 薄膜在添加介电常数较高和本体粘度较低的增塑剂C4 H6O3后 ,当其相对浓度nPC/ntotal=2 0 %时 ,不仅使该薄膜的室温常压离子电导率明显提高 6 8倍 ,而且使其在高压力下的离子电导率提高 1(0 1~ 10 0MPa)至 2 (35 0~80 0MPa)个数量级 ,非常有利于在高压环境中应用。 展开更多
关键词 聚乙烯氧化物薄膜 静水压 离子电导率 介电常数 增塑剂 混溶蒸发
下载PDF
基于XRD与差热-热重探究Ba1.55Ca0.45SiO4晶体的合成机理 被引量:1
2
作者 徐利华 《人工晶体学报》 EI CAS 北大核心 2020年第7期1286-1293,共8页
以正硅酸乙酯、乙酸钡、乙酸钙为原料,通过液相混溶的方式将三者均匀混合获得预处理粉体,而后利用XRD与DTA-TG研究固相合成法过程中预处理粉体中各物质间的相互反应,同时利用XRD探究不同的升温速率、不同的煅烧工艺以及保温时间对合成... 以正硅酸乙酯、乙酸钡、乙酸钙为原料,通过液相混溶的方式将三者均匀混合获得预处理粉体,而后利用XRD与DTA-TG研究固相合成法过程中预处理粉体中各物质间的相互反应,同时利用XRD探究不同的升温速率、不同的煅烧工艺以及保温时间对合成高膨胀系数Ba1.55Ca0.45SiO4晶体的影响。结果表明,在固相反应的过程中,预处理粉体中的乙酸盐首先分解生成相对应的碳酸盐,同时可能形成相对应的BaCa(CO3)2固溶体;随着温度升高,低熔点的碳酸盐开始分解,当温度升高至1 063℃时,BaCO3与SiO2反应生成Ba2SiO4晶体,继续升温至1 144℃时,Ca^2+固溶进入Ba2SiO4晶体形成Ba1.55Ca0.45SiO4晶体;另外,将预处理粉体二次煅烧或压制成条状样品进行加热时,粉体中的BaCO3难以完全参与反应,而当粉体自然堆积、以1℃/min的升温速率加热至1 250℃保温5 h后可获得平均线性热膨胀系数为12.63×10^-6 K^-1的Ba1.55Ca0.45SiO4晶体。 展开更多
关键词 Ba1.55Ca0.45SiO4晶体 液相混溶法 固相合成 合成过程 热膨胀系数
下载PDF
纳米纤维素掺杂环氧树脂复合材料的制备及力学性能研究 被引量:3
3
作者 姚艳芳 姚轶凡 王云 《功能材料》 CAS CSCD 北大核心 2021年第7期7186-7190,共5页
以环氧树脂E51作为基质材料,纳米纤维素(CNF)作为掺杂材料,采用混溶法制备了一系列不同CNF掺量(0%,0.3%,0.6%和0.9%(质量分数))的环氧树脂复合材料。通过FT-IR、SEM和力学性能测试等方法分析了复合材料的结构、形貌和力学性能。结果表明... 以环氧树脂E51作为基质材料,纳米纤维素(CNF)作为掺杂材料,采用混溶法制备了一系列不同CNF掺量(0%,0.3%,0.6%和0.9%(质量分数))的环氧树脂复合材料。通过FT-IR、SEM和力学性能测试等方法分析了复合材料的结构、形貌和力学性能。结果表明,掺杂CNF的环氧树脂复合材料体系均已无丙酮存在,且CNF已成功掺入了环氧树脂复合材料中。随着CNF的掺入,环氧树脂复合材料的冲击强度、抗拉强度、弹性模量和延伸率均呈现先增大后降低的趋势,且整体均高于纯环氧树脂材料。当CNF的掺量为0.6%(质量分数)时,复合材料的冲击强度、抗拉强度、延伸率和弹性模量均达到最大值,分别为29.5 kJ/m^(2),87 MPa,5.8%和2846 MPa;当CNF的掺量过高时,复合材料的冲击强度、抗拉强度、延伸率和弹性模量均有所下降。未掺杂CNF的纯环氧树脂材料的断面较为光滑平整,断面的断裂方向整体一致,断裂方式为脆性断裂;当掺入CNF后,复合材料的断面均较为粗糙,并且断面的断裂方向变得不均匀和多元化,断裂方式为韧性断裂。 展开更多
关键词 纳米纤维素 环氧树脂 混溶法 丙酮 力学性能
下载PDF
Separation of arenols from a high-temperature coal tar 被引量:3
4
作者 Ting Yao Zhi-Min Zong +3 位作者 ZheWen Robert Mukasa Nan-Hua Yuan Xian-Yong Wei 《International Journal of Mining Science and Technology》 2012年第2期243-244,共2页
A high-temperature coal tar collected from Xuzhou Coking Plant, Saint-Gobain Pipelines (Xuzhou) Co., Ltd. was exhaustively extracted with petroleum ether (PE). The extract was sequentially eluted through silica ge... A high-temperature coal tar collected from Xuzhou Coking Plant, Saint-Gobain Pipelines (Xuzhou) Co., Ltd. was exhaustively extracted with petroleum ether (PE). The extract was sequentially eluted through silica gel with PE and PE/ethyl acetate (EA) mixed solvents (volume ratio 2:1 ) to afford two eluted frac- tions. The extract and eluted fractions were analyzed with gas chromatography/mass spectrometry. In total, 14 arenols were detected, including phenol, cresols, xylenols, fluorenols, phenanthren-3-ol and pyren-l-ol. 展开更多
关键词 Coal tarArenolsColumn chromatographyIdentificationGC[MS analysis
下载PDF
Dissipative Particle Dynamics Simulations of Domain Growth and Phase Separation in Binary Immiscible Fluids
5
作者 Ying Zhao Hong Liu +1 位作者 Zhong-yuan Lu Chia-chung Sun 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 北大核心 2008年第5期451-456,共6页
It was investigated that the domain growth processes of spinodal decomposition with different quenching depth in two and three dimensional binary immiscible fluids by using parallel dissipative particle dynamics simul... It was investigated that the domain growth processes of spinodal decomposition with different quenching depth in two and three dimensional binary immiscible fluids by using parallel dissipative particle dynamics simulations. In two dimensions, the dynamic scaling exponent 1/2 for coalescence and 2/3 for inertial regimes in the shallow quench and strong finite size effects in the cases of deep quenching were obtained. In three dimensions, it was used that the diffusive regime with exponent n=l/3 in the shallow quench and the inertial hydrodynamic regime with n=2/3 for different quenches. The viscous effects are not clearly reflected, showing n=1/2 in both shallow and deep quenches in this time period, due to the soft nature of interaction potential adopted in dissipative particle dynamics. 展开更多
关键词 Dissipative particle dynamics Binary immiscible fluids Domain growth
下载PDF
SYNTHESIS AND CHARACTERIZATION OF NOVEL SOL-GEL DOPED ORGANIC/INORGANIC HYBRID NONLINEAR OPTICAL MATERIALS
6
作者 XI Hongxia LIU Guanxin +1 位作者 WANG Huan LI Zhong 《Chinese Journal of Reactive Polymers》 2003年第1期1-9,共9页
hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) mat... hydroxy-4-nitro azobenzene (NHA) and 4-amino-4-nitro azobenzene (DO3) were prepared respectively from p-nitrophenylamine as a precursor compound. Two kinds of doped organic/inorganic hybrid nonlinear optical (NLO) materials containing NHA and DO3 were synthesized by Sol-Gel process. The preparation and properties of two NLO materials were studied and characterized by FTIR, 1H-NMR, UV-VIS, SEM, DSC and SHG measurements. The results show that the maximum doping amounts of NHA and DO3 in two doped hybrid NLO materials are 7.2(wt)% and 11.3(wt)% respectively, and the corresponding second-order NLO coefficients (d33 values) are 2.91×10 8esu and 6.14×10 8esu. Two doped NLO materials have relatively good RT stability, after 90 days at RT the d33 values can maintain about 85% of their initial values, but after 10h at 100℃ can only maintain about 50% of their initial values. In this report, the reasons for high-temperature instability of doped materials were discussed, and the possible improvements were also suggested. 展开更多
关键词 Sol-Gel technology DOPING Organic/inorganic hybrid nonlinear optical materials Second-order NLO coefficients
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部