The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with ...The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with the employment of the equations derived from the Weibull theory. The four probability estimators of the Weibull distribution were also evaluated. The results showed that the estimator （2a） was acceptable for calculating the Weibull modulus of the jute/cotton blended yarns. With the exception of breaking strength of the J30/C70 at the gauge length of 200 ram, the breaking strengths of both blended yarn could be predicted accurately by the Eqs. （9） or （10） in this paper.展开更多
Yarn quality characteristics are affected by processing parameters. A 36 tex rotor spun yarn of 50/50 Basofil/ cotton （B/C） blended yarn was spun, and the spinning process optimised for rotor speed, opening roller s...Yarn quality characteristics are affected by processing parameters. A 36 tex rotor spun yarn of 50/50 Basofil/ cotton （B/C） blended yarn was spun, and the spinning process optimised for rotor speed, opening roller speed and twist factor. Selected yarn characteristics were studied during the optimization process. During the optimizations process yarn elongation and hairiness reduced with increase in rotor speed. Tenacity increased with increase of rotor speed. The increase in TF caused tenacity and CV of count to increase up to a peak and then started to decrease with further increase of TF.While TF caused an increase in yarn hairiness, elongation decreased to a minimum level and then started to increase with further increase of TF. CV of count and hairiness increased with increase in opening roller speed, but tenacity and elongation decreased with increase in opening roller speed. The optimization process yielded the optimum levels for rotor speed, opening roller speed and twist factor （TF） as 45,000 rpm, 6,500 rpm and 450 respectively. As per uster Standards the optimum yam showed good results for CV of count, CV of tenacity and thin places/km.展开更多
The traditional Contour Tracing algorithm works on the binary image. It is developed that a new model called Facula Diffusion which can work directly on gray-scaled images according to the principle of human vision. T...The traditional Contour Tracing algorithm works on the binary image. It is developed that a new model called Facula Diffusion which can work directly on gray-scaled images according to the principle of human vision. The diffusion operation is controlled by four factors including approximation, closing, length-limiting, and hit-rate. Based on this model, three shape indices, i. e., dimension index, abnormity index, and fluctuation index, were put forward to describe the shape of objects. The rule of shape indices selection was discussed subsequently. Finally, the fibers in polyester/cotton blended yam are classified and the blending ratio is determined.展开更多
基金National Key Technologies R&D Programof China (No.2007BAE41B01)
文摘The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with the employment of the equations derived from the Weibull theory. The four probability estimators of the Weibull distribution were also evaluated. The results showed that the estimator （2a） was acceptable for calculating the Weibull modulus of the jute/cotton blended yarns. With the exception of breaking strength of the J30/C70 at the gauge length of 200 ram, the breaking strengths of both blended yarn could be predicted accurately by the Eqs. （9） or （10） in this paper.
文摘Yarn quality characteristics are affected by processing parameters. A 36 tex rotor spun yarn of 50/50 Basofil/ cotton （B/C） blended yarn was spun, and the spinning process optimised for rotor speed, opening roller speed and twist factor. Selected yarn characteristics were studied during the optimization process. During the optimizations process yarn elongation and hairiness reduced with increase in rotor speed. Tenacity increased with increase of rotor speed. The increase in TF caused tenacity and CV of count to increase up to a peak and then started to decrease with further increase of TF.While TF caused an increase in yarn hairiness, elongation decreased to a minimum level and then started to increase with further increase of TF. CV of count and hairiness increased with increase in opening roller speed, but tenacity and elongation decreased with increase in opening roller speed. The optimization process yielded the optimum levels for rotor speed, opening roller speed and twist factor （TF） as 45,000 rpm, 6,500 rpm and 450 respectively. As per uster Standards the optimum yam showed good results for CV of count, CV of tenacity and thin places/km.
文摘The traditional Contour Tracing algorithm works on the binary image. It is developed that a new model called Facula Diffusion which can work directly on gray-scaled images according to the principle of human vision. The diffusion operation is controlled by four factors including approximation, closing, length-limiting, and hit-rate. Based on this model, three shape indices, i. e., dimension index, abnormity index, and fluctuation index, were put forward to describe the shape of objects. The rule of shape indices selection was discussed subsequently. Finally, the fibers in polyester/cotton blended yam are classified and the blending ratio is determined.
