Zr-Y jointly modified silicide coatings were prepared on an Nb-Ti-Si-Cr based ultrahigh temperature alloy by pack cementation process. The wear behaviors of both the base alloy and coatings were comparatively studied ...Zr-Y jointly modified silicide coatings were prepared on an Nb-Ti-Si-Cr based ultrahigh temperature alloy by pack cementation process. The wear behaviors of both the base alloy and coatings were comparatively studied at room temperature and 800 ℃ using SiC balls as the counterpart. The Zr-Y jointly modified silicide coating is mainly composed of a thick （Nb,X）Si2 outer layer and a thin （Ti,Nb）5Si4 inner layer. The coatings possess much higher microhardness than the base alloy. The wear rates of both the base alloy and coatings increase with increasing the sliding loads. However, the coatings have much lower wear rates than the base alloy under the same sliding conditions. The coatings have superior anti-friction property, and can provide effective protection for the base alloy at both room temperature and 800 ℃ in air.展开更多
A computational study was firstly performed in this work to examine the applicability of an acid-functionalized metal-organic framework(MOF), Ui O-66(Zr)-(COOH)2, in membrane-based H2S/CH4 separation. The results show...A computational study was firstly performed in this work to examine the applicability of an acid-functionalized metal-organic framework(MOF), Ui O-66(Zr)-(COOH)2, in membrane-based H2S/CH4 separation. The results show that this MOF could be potentially interesting when being used as the pure membrane material for the separation of the mixture with low H2 S concentration. Further, the performance of 10 different mixed matrix membranes(MMMs) on the basis of the MOF was predicted by combing the molecular simulation data and the Maxwell permeation model. The results indicate that using this MOF as filler particles in MMMs can signi ficantly enhance the permeation performance of pure polymers. The findings obtained in this work may be helpful in facilitating the application of this promising MOF for practical desulfurization process of fuel gas.展开更多
基金Projects(51371145,51431003,U1435201,51401166)supported by the National Natural Science Foundation of ChinaProject(B080401)supported by the Programme of Introducing Talents of Discipline to Universities,China
文摘Zr-Y jointly modified silicide coatings were prepared on an Nb-Ti-Si-Cr based ultrahigh temperature alloy by pack cementation process. The wear behaviors of both the base alloy and coatings were comparatively studied at room temperature and 800 ℃ using SiC balls as the counterpart. The Zr-Y jointly modified silicide coating is mainly composed of a thick （Nb,X）Si2 outer layer and a thin （Ti,Nb）5Si4 inner layer. The coatings possess much higher microhardness than the base alloy. The wear rates of both the base alloy and coatings increase with increasing the sliding loads. However, the coatings have much lower wear rates than the base alloy under the same sliding conditions. The coatings have superior anti-friction property, and can provide effective protection for the base alloy at both room temperature and 800 ℃ in air.
基金Supported by the National Key Basic Research Program of China(2013CB733503)the National Natural Science Foundation of China(21136001,21276009 and 21322603)the Program for New Century Excellent Talents in University(NCET-12-0755)
文摘A computational study was firstly performed in this work to examine the applicability of an acid-functionalized metal-organic framework(MOF), Ui O-66(Zr)-(COOH)2, in membrane-based H2S/CH4 separation. The results show that this MOF could be potentially interesting when being used as the pure membrane material for the separation of the mixture with low H2 S concentration. Further, the performance of 10 different mixed matrix membranes(MMMs) on the basis of the MOF was predicted by combing the molecular simulation data and the Maxwell permeation model. The results indicate that using this MOF as filler particles in MMMs can signi ficantly enhance the permeation performance of pure polymers. The findings obtained in this work may be helpful in facilitating the application of this promising MOF for practical desulfurization process of fuel gas.
