Different amounts of FCC slurry oil and HVGO were added to Tahe atmospheric residue respectively. The colloi- dal stability and asphaltene agglomeration of atmospheric residue and mixed oils were characterized by mean...Different amounts of FCC slurry oil and HVGO were added to Tahe atmospheric residue respectively. The colloi- dal stability and asphaltene agglomeration of atmospheric residue and mixed oils were characterized by means of the mass fraction normalized conductivity and the small-angle X-ray scattering technology （SAXS）. The results indicated that the sta- bility of Tahe atmospheric residue decreased with an increasing amount of these oil fractions. It was found that the decline of the colloidal stability was attributed to the component polarity difference between oil fractions and the atmospheric resi- due. Though the aromaticity of FCC slurry oil was higher than that of HVGO, the polarity of aromatics and resins of FCC slurry oil was lower than those of HVGO. So the degree of the colloidal stability was more seriously destroyed by FCC slurry oil. The dispersion of asphaltenes in Tahe atmospheric residue was changed by adding FCC slurry oil and HVGO. The particle size of as-ohaltenes increased alon~ with the decline of the colloidal stability展开更多
The results to develop a complex technology of co-extraction of germanium and gallium from the ash-and-slag wastes of coal combustion in Ukraine were presented. Based on the study of phase changes occurring in initial...The results to develop a complex technology of co-extraction of germanium and gallium from the ash-and-slag wastes of coal combustion in Ukraine were presented. Based on the study of phase changes occurring in initial raw materials as a result of its processing, it was proposed to carry out a preliminary enrichment of the raw materials in order to produce secondary sublimates. Their further processing involves a combination of leaching soluble material with distillation of germanium in the form of tetrachloride. The resulting acidic solutions are trended to the gallium extraction. Optimum conditions of carrying out of processes are recommended.The chemical and phase composition of the resulting dump products and solutions have been defined. On the basis of it ways of their processing for the purpose of reception of alumina and building materials are recommended.展开更多
Extraction of AchE, relationship between substrate and enzyme concentration, and inhibition effects of the agrochemicals to AchE are discussed in this paper. Through the re-search, the proper AchE concentration for hy...Extraction of AchE, relationship between substrate and enzyme concentration, and inhibition effects of the agrochemicals to AchE are discussed in this paper. Through the re-search, the proper AchE concentration for hydrolysis of 1 ml 1mmol/L substrate and I50 val-ues of the agrochemicals to AchE are decided. It is proved that Asch-DTNB method is a rapid test tool for agrochemical residues in fruits and vegetables.A rapid test card has been developed with sensitivity of 0.05mg/L.展开更多
The effect of catalyst properties on residue oil hydroconversion was studied at moderate operating conditions(at a temperature of 400 ℃, an initial hydrogen pressure of 10 MPa, and a reaction time of 4 h) in a batch ...The effect of catalyst properties on residue oil hydroconversion was studied at moderate operating conditions(at a temperature of 400 ℃, an initial hydrogen pressure of 10 MPa, and a reaction time of 4 h) in a batch mode slurry phase with different catalyst samples. The results showed that the catalyst acidity had a good effect on residue conversion and MCR(micro carbon residue) conversion but brought about higher coke yield. Residue conversion was thermally induced but the catalyst acidity changed its conversion route. A catalyst with higher metal loading, higher hydrogenation activity and appropriate pore size had higher sulfur and metal removal rate, higher MCR conversion and also a lower coke formation. The activity of spent commercial catalyst AS1 and DS1 was slightly lower than the corresponding fresh ones but was still high enough for residue oil hydroconversion. It assumes that the role of the catalyst is to activate hydrogen species toward reaction with an aromatic carbon radical to yield a cyclohexadienyl type intermediate which will turn into liquid and also to absorb the mesophase which can easily aggregate to form coke.展开更多
The objectives of this study were to explore alternatives for using fruit waste and sugarcane bagasse as important sources for new products and potential applications in the food industry. Fast foods are part of moder...The objectives of this study were to explore alternatives for using fruit waste and sugarcane bagasse as important sources for new products and potential applications in the food industry. Fast foods are part of modern life, as well as sources for producing biofuels based on biomass. The mineral content and compounds of nutritional interest, such as lipophilic substances, were determined in fruit waste （orange peels, passion fruit, bananas, grapes） and sugarcane bagasse. Significant differences were found in the samples tested, where minerals, such as potassium, nitrogen, zinc and iron, were found in fruit residues （bananas, oranges, passion fruit） and sugarcane bagasse. Banana residues were the most important source of minerals, followed by orange peels. Gas chromatography mass spectrography （GC-MS） analyses of the lipophilic fractions obtained from the plant residues revealed the presence of mostly saturated （palmitic, stearic） and unsaturated （oleic and linoleic） fatty acids, as well as other nutritionally valuable compounds, such as antioxidants （flavones in orange residues）. The residues studied here can be used for future research to optimize pretreatment and hydrolysis of biomass for bioethanol production.展开更多
An equivalent amount of metallurgical slag, water-quenched slag powder and activator was substituted for a part of cement to prepare concretes at strength grades ofC25, C30 and C40. Thanks to the filling effect, pozzo...An equivalent amount of metallurgical slag, water-quenched slag powder and activator was substituted for a part of cement to prepare concretes at strength grades ofC25, C30 and C40. Thanks to the filling effect, pozzolanic effect, raicro-aggregate effect, and improvement of pore structure, the prepared concretes not only had greater strength compared with reference concrete, but also had greater impermeability and frost-resistance. Moreover, the expansion reactions between alkali and aggregates were effectively inhibited. The slag and activator can serve as the raw materials for green concretes.展开更多
Microwave absorbing properties of high titanium slag were investigated by using microwave cavity perturbation technique. High titanium slag containing more than 90% TiO2 was prepared by carbothermal reduction of ilmen...Microwave absorbing properties of high titanium slag were investigated by using microwave cavity perturbation technique. High titanium slag containing more than 90% TiO2 was prepared by carbothermal reduction of ilmenite. The temperature rise curve of high titanium slag in microwave heating process was obtained. Crystalline compounds of high titanium slag before and after microwave irradiation were obtained and characterized by X-ray diffractometry （XRD）. Effects of particle size of high titanium slag anal mixtures of high titanium slag with different mass fractions of V2o5 on microwave absorbing properties were investigated systematically. The results show that high titanium slag has good microwave absorption property; untreated high titanium slag mainly consists of crystalline compounds of anatase and iron titanium oxide, while the microwave-irradiation treated one is mainly composed of crystalline compounds of rutile and irgn titanium oxide. Synthetic anatase is transformed completely into rutile at about 1 050 ℃ for 20 min under microwave irradiation. High frequency shift and low amplitude of voltage make high titanium slag an ideal microwave absorbent. 180 μm of particle size and 10% mass fraction of V2O5 are found to be the optimum conditions for microwave absorption.展开更多
基金Financial support was provided by the Ministry of Science and Technology of China through the National Basic Research Program (Grant No. 2010CB217807)
文摘Different amounts of FCC slurry oil and HVGO were added to Tahe atmospheric residue respectively. The colloi- dal stability and asphaltene agglomeration of atmospheric residue and mixed oils were characterized by means of the mass fraction normalized conductivity and the small-angle X-ray scattering technology （SAXS）. The results indicated that the sta- bility of Tahe atmospheric residue decreased with an increasing amount of these oil fractions. It was found that the decline of the colloidal stability was attributed to the component polarity difference between oil fractions and the atmospheric resi- due. Though the aromaticity of FCC slurry oil was higher than that of HVGO, the polarity of aromatics and resins of FCC slurry oil was lower than those of HVGO. So the degree of the colloidal stability was more seriously destroyed by FCC slurry oil. The dispersion of asphaltenes in Tahe atmospheric residue was changed by adding FCC slurry oil and HVGO. The particle size of as-ohaltenes increased alon~ with the decline of the colloidal stability
文摘The results to develop a complex technology of co-extraction of germanium and gallium from the ash-and-slag wastes of coal combustion in Ukraine were presented. Based on the study of phase changes occurring in initial raw materials as a result of its processing, it was proposed to carry out a preliminary enrichment of the raw materials in order to produce secondary sublimates. Their further processing involves a combination of leaching soluble material with distillation of germanium in the form of tetrachloride. The resulting acidic solutions are trended to the gallium extraction. Optimum conditions of carrying out of processes are recommended.The chemical and phase composition of the resulting dump products and solutions have been defined. On the basis of it ways of their processing for the purpose of reception of alumina and building materials are recommended.
文摘Extraction of AchE, relationship between substrate and enzyme concentration, and inhibition effects of the agrochemicals to AchE are discussed in this paper. Through the re-search, the proper AchE concentration for hydrolysis of 1 ml 1mmol/L substrate and I50 val-ues of the agrochemicals to AchE are decided. It is proved that Asch-DTNB method is a rapid test tool for agrochemical residues in fruits and vegetables.A rapid test card has been developed with sensitivity of 0.05mg/L.
文摘The effect of catalyst properties on residue oil hydroconversion was studied at moderate operating conditions(at a temperature of 400 ℃, an initial hydrogen pressure of 10 MPa, and a reaction time of 4 h) in a batch mode slurry phase with different catalyst samples. The results showed that the catalyst acidity had a good effect on residue conversion and MCR(micro carbon residue) conversion but brought about higher coke yield. Residue conversion was thermally induced but the catalyst acidity changed its conversion route. A catalyst with higher metal loading, higher hydrogenation activity and appropriate pore size had higher sulfur and metal removal rate, higher MCR conversion and also a lower coke formation. The activity of spent commercial catalyst AS1 and DS1 was slightly lower than the corresponding fresh ones but was still high enough for residue oil hydroconversion. It assumes that the role of the catalyst is to activate hydrogen species toward reaction with an aromatic carbon radical to yield a cyclohexadienyl type intermediate which will turn into liquid and also to absorb the mesophase which can easily aggregate to form coke.
文摘The objectives of this study were to explore alternatives for using fruit waste and sugarcane bagasse as important sources for new products and potential applications in the food industry. Fast foods are part of modern life, as well as sources for producing biofuels based on biomass. The mineral content and compounds of nutritional interest, such as lipophilic substances, were determined in fruit waste （orange peels, passion fruit, bananas, grapes） and sugarcane bagasse. Significant differences were found in the samples tested, where minerals, such as potassium, nitrogen, zinc and iron, were found in fruit residues （bananas, oranges, passion fruit） and sugarcane bagasse. Banana residues were the most important source of minerals, followed by orange peels. Gas chromatography mass spectrography （GC-MS） analyses of the lipophilic fractions obtained from the plant residues revealed the presence of mostly saturated （palmitic, stearic） and unsaturated （oleic and linoleic） fatty acids, as well as other nutritionally valuable compounds, such as antioxidants （flavones in orange residues）. The residues studied here can be used for future research to optimize pretreatment and hydrolysis of biomass for bioethanol production.
文摘An equivalent amount of metallurgical slag, water-quenched slag powder and activator was substituted for a part of cement to prepare concretes at strength grades ofC25, C30 and C40. Thanks to the filling effect, pozzolanic effect, raicro-aggregate effect, and improvement of pore structure, the prepared concretes not only had greater strength compared with reference concrete, but also had greater impermeability and frost-resistance. Moreover, the expansion reactions between alkali and aggregates were effectively inhibited. The slag and activator can serve as the raw materials for green concretes.
基金Project(2007CB613606) supported by the Major State Basic Research and Development Program of ChinaProject(50734007) supported by the National Natural Science Foundation of China
文摘Microwave absorbing properties of high titanium slag were investigated by using microwave cavity perturbation technique. High titanium slag containing more than 90% TiO2 was prepared by carbothermal reduction of ilmenite. The temperature rise curve of high titanium slag in microwave heating process was obtained. Crystalline compounds of high titanium slag before and after microwave irradiation were obtained and characterized by X-ray diffractometry （XRD）. Effects of particle size of high titanium slag anal mixtures of high titanium slag with different mass fractions of V2o5 on microwave absorbing properties were investigated systematically. The results show that high titanium slag has good microwave absorption property; untreated high titanium slag mainly consists of crystalline compounds of anatase and iron titanium oxide, while the microwave-irradiation treated one is mainly composed of crystalline compounds of rutile and irgn titanium oxide. Synthetic anatase is transformed completely into rutile at about 1 050 ℃ for 20 min under microwave irradiation. High frequency shift and low amplitude of voltage make high titanium slag an ideal microwave absorbent. 180 μm of particle size and 10% mass fraction of V2O5 are found to be the optimum conditions for microwave absorption.
