A two-stage oxidation—alkali leaching—acid leaching method was proposed to recovery Fe,V,and Ti in modified Ti-bearing blast furnace slag.The optimal experiment conditions of iron extraction were one-stage oxidation...A two-stage oxidation—alkali leaching—acid leaching method was proposed to recovery Fe,V,and Ti in modified Ti-bearing blast furnace slag.The optimal experiment conditions of iron extraction were one-stage oxidation time 40 s and holding time 8 min.The recovery rate of iron was 89.93%.The optimum experiment conditions of vanadium extraction were total oxidation time of 126 s,NaOH concentration of 4.0 mol/L,leaching temperature of 95℃,leaching time of 90 min,and the number of cycle was 4.The leaching rate of vanadium was 92.13%.The optimal experiment conditions of titanium extraction were HCl concentration of 4.5 mol/L,leaching temperature of 75℃,and leaching time of 90 min.The TiO_(2)content of synthetic rutile was 98.61%.展开更多
Preliminary study on concentration and separation of tin(Sn) from copper alloy dross by selective dissolution method was conducted. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution...Preliminary study on concentration and separation of tin(Sn) from copper alloy dross by selective dissolution method was conducted. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow separation of tin from the copper alloy dross. The tin as H2SnO3(metastannic acid) phase was precipitated in the solution with centrifuging process and transformed to tin dioxide(SnO2) after drying process. The dried sample was heat-treated at low temperature and its phase characteristics, surface morphology and chemical composition were investigated.展开更多
基金financial support from the National Science and Technology Support Program of China(No.2015BAB18B00)。
文摘A two-stage oxidation—alkali leaching—acid leaching method was proposed to recovery Fe,V,and Ti in modified Ti-bearing blast furnace slag.The optimal experiment conditions of iron extraction were one-stage oxidation time 40 s and holding time 8 min.The recovery rate of iron was 89.93%.The optimum experiment conditions of vanadium extraction were total oxidation time of 126 s,NaOH concentration of 4.0 mol/L,leaching temperature of 95℃,leaching time of 90 min,and the number of cycle was 4.The leaching rate of vanadium was 92.13%.The optimal experiment conditions of titanium extraction were HCl concentration of 4.5 mol/L,leaching temperature of 75℃,and leaching time of 90 min.The TiO_(2)content of synthetic rutile was 98.61%.
基金supported by the "Energy Efficiency & Resources" of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No. 20125010100030-11-2-400)
文摘Preliminary study on concentration and separation of tin(Sn) from copper alloy dross by selective dissolution method was conducted. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow separation of tin from the copper alloy dross. The tin as H2SnO3(metastannic acid) phase was precipitated in the solution with centrifuging process and transformed to tin dioxide(SnO2) after drying process. The dried sample was heat-treated at low temperature and its phase characteristics, surface morphology and chemical composition were investigated.
