西门子M6E型加速器“温度/压力补偿因子”修正一例

在预照射电子束时,刚一进入电子线菜单,便出现"Pres/Temp Saturation"联锁,产生的原因是温度,压力补偿偏差过大,在维修模式下进入菜单E:Compensation factor中.

新疆哈密东戈壁斑岩型钼矿床成矿深度研究

新疆哈密东戈壁斑岩型钼矿为特大型钼矿床,钼金属资源量50.8万t。在勘探过程中采集了一批与成矿有关的流体包裹体测温、测压样品,获得了与成矿作用有关的较为丰富的温度、压力数据,为成矿深度研究提供了基础资料。本文利用平衡温度/压力进行成矿深度计算的方法,使成矿深度的计算更加量化、数据更具体,并与地层厚度累加法计算结果进行对比,指出东戈壁钼矿成矿深度6.7 km,为超深成热液矿床。

高精度流体热物性实验系统及测试

高精度的流体热物性实验研究是新工质工程应用的必要基础,也是获取部分基础物理常量的重要途径(如声速法测量玻尔兹曼常数k、通用气体常数R)。本文建立了高精度的流体热物性实验系统,包括温度测量和恒温系统、压力测量及真空配气系统,实现了实验系统的自动控制与数据采集。可用温度范围-40～180℃,不确定度为±5 mK;压力范围0～10MPa,不确定度为±50 Pa(0～130 kPa),±100 Pa(130～3000 kPa),±0.01%(3～10 MPa)。进行了HFC-227ea的饱和蒸气压验证性实验,结果表明本系统运行稳定,具有较高测量精度。

油气井生产测井中的光纤传感技术

本文系统地分析了常规生产测井仪器流量、温度、压力、持率、密度、伽马传感器应用于油藏监测、生产测试和油田开发中存在的问题,总结了新一代流量、温度、压力、持率、密度、伽马仪的光纤传感器的原理、特点,国内外研究现状及应用情况,论证了光纤传感技术以其独特的优势取代传统电子传感技术的发展趋势及这些新型生产测井仪器在油田测试与油藏监测中的应用前景.

仪表一次取源阀及仪表导压管道连接阀选型及应用

阐述了API600和API602两项标准的技术特点和适用范围,介绍了仪表一次取源阀和仪表导压管道连接阀选型及应用,重点介绍了石油化工行业中采用API600和API602标准的仪表一次取源根部阀,以及压力等级为Class 800的承插焊和螺纹端阀门的应用。总结了采用API602标准的阀门选型重点。

Influence of Temperature on the Inter-pressure of Soil Water Tension with Correcting Method

When the electronic temperature sensor was incorporated into a system of soil water tension and the insidetube temperature was monitored in real time, it is concluded that the inside temperature increased by 26.9 ℃ and the inside pressure changed about 14.6 Kpa, when the pottery soil was replaced by the sealing plug. When the soil water was relatively stable in the experimental salvers, the in-side pressure stil varied regularly with the temperature. When the inside temperature increased by 22.2 ℃, the inside pressure varied about 7.4 Kpa. Through com-pensation calculation of the inside tension, the temperature in the warming and cooling periods was compensated, which was useful to correct the tension measurement errors induced from the changing temperature. When the measuring interval was 4 hours and the temperature difference was 18.1 ℃, the tension difference of both points was only 0.278 Kpa, compared to the difference up to 6.5 Kpa before compensation.

延期药道点火缓冲器

延期药道点火缓冲器（45）位于雷管管壳（15）或信号传递管壳中的传输管（11）和延期药道（25）之间。该缓冲器控制着管子温度／压力脉冲的传递速度，在此速度下，管子温度／压力脉冲的传递被用于延期药道火工烟火表面，衰减了脉冲的作用，最终提高了延期时间的精确。缓冲器也会减缓由于传递管破裂或管子从壳中抛射而引起雷管内突然减压的影响，这样就防止了正在反应的火工烟火品的分离。否则，火工烟火品的分离会引起分离处反应停止，因而引起延期药道不能使烟火剂的连续燃烧通过它的整个长度。

Strength regularity and failure criterion of plain HSHPC under biaxial compression after exposure to high temperatures

Biaxial compression tests are performed on 100 mm × 100 mm × 100 mm cubic specimens of plain high-strength highperformance concrete （HSHPC） at seven kinds of stress ratios, σ2：σ3 =0 ： - 1, -0.20 ： - 1, -0.30 ： - 1, -0.40 ： - 1, -0.50 ： -1, -0. 75 ： - 1, and - 1.00 ： - 1 after exposure to normal and high temperatures of 20, 200, 300, 400, 500 and 600 ℃, using a large static-dynamic true triaxial machine. Frictionreducing pads are three layers of plastic membranes with glycerine in-between for the compressive loading plane. Failure modes of the specimens are described. The two principally static compressive strengths are measured. The influences of the temperatures and stress ratios on the biaxial strengths of HSHPC after exposure to high temperatures are also analyzed. The experimental results show that the uniaxial compressive strength of plain HSHPC after exposure to high temperatures does not decrease completely with the increase in temperature; the ratios of the biaxial to its uniaxial compressive strengths depend on the stress ratios and brittleness-stiffness of HSHPC after exposure to different high temperatures. The formula of the Kupfer-Gerstle failure criterion modified with the temperature and stress ratio parameters for plain HSHPC is proposed.

Finite element analysis of pressure on 2024 aluminum alloy created during restricting expansion-deformation heat-treatment

Metals heat-treated under high pressure can exhibit different properties. The heat-induced pressure on 2024 aluminum alloy during restricting expansion-deformation heat-treatment was calculated by using the ABAQUS finite element software, and the effects of the mould material properties, such as coefficient of thermal expansion （CTE）, elastic modulus and yield strength, on the pressure were discussed. The simulated results show that the relatively uniform heat-induced pressure, approximately 503 MPa at 500 ℃, appears on 2024 alloy when 42CrMo steel is as the mould material. The heat-induced pressure increases with decreasing the CTE and the increases of elastic modulus and yield strength of the mould material. The influences of the CTE and elastic modulus on the heat-induced pressure are more notable.

Preventing Coal and Gas Outburst Using Methane Hydration

According to the characteristics of the methane hydrate condensing and accumulating methane, authors put forward a new technique thought way to prevent the accident of coal and gas outburst by urging the methane in the coal seams to form hydrate. The paper analyzes the feasibility of forming the methane hydrate in the coal seam from the several sides, such as, temperature,pressure, and gas components, and the primary trial results indicate the problems should be settled before the industrialization appliance realized.

Adsorption mechanism of different coal ranks under variable temperature and pressure conditions

Variable temperature and pressure adsorption tests were conducted on four coal samples with different coal ranks, under simulated temperatures and pressures corresponding to coal reservoirs at different depths. The regularity of the variation in the amounts of adsorption by coals under variable temperature and pressure and 30 ℃ isothermal conditions are compared and the adsorption characteristics of coal under the composite effect of temperature and pressure were obtained. The adsorption test and data processing method of coal under variable temperature and pressure are presented and the effect of the mechanism of temperature and pressure on the adsorption capacity of coal has been studied. The research results are of significant importance in the investigation of coalbed methane storage mechanism and for the prediction of the amounts of coalbed methane at various depths.

Study on Calculations of Humidification Tower with Humid Air Turbine Cycle at High Temperature and Pressure

Humidification is an important step in humid air turbine system. The calculation on humidification is carried out at 423.15—573.15K, 5—15MPa. The results suggest that to produce high-enthalpy moist air, high water temperature and large water flow are needed. The water temperature is the most sensitive parameter to the humidification tower. And it is better for the humidification tower to work at temperature higher than 523 K when the system pressure is higher than 5 MPa. The comparison between the model used in this paper and ideal model shows that the ideal model can be used in simulation to simply the calculation when the temperature is lower than 473 K and pressure is lower than 5 MPa.

Pressure and Temperature Feasibility of NCEP/NCAR Reanalysis Data at Mt.Everest

Mt.Everest (27°54' N,86°54' E),the highest peak,is often referred to as the earth's 'third' pole,at an elevation of 8844.43 m. Due to the difficult logistics in the extreme high elevation regions over the Himalayas,observational meteorological data are very few on Mt. Everest. In 2005,an automatic weather station was operated at the East Rongbuk glacier Col of Mt. Everest over the Himalayas. The observational data have been compared with the reanalysis data from the National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR),and the reliability of NCEP/NCAR reanalysis data has been investigated in the Himalayan region,after the reanalyzed data were interpolated in the horizontal to the location of Mt. Everest and in the vertical to the height of the observed sites. The reanalysis data can capture much of the synoptic-scale variability in temperature and pressure,although the reanalysis values are systematically lower than the observation. Furthermore,most of the variability magnitude is,to some degree,underestimated. In addition,the variation extracted from the NCEP/NCAR reanalyzed pressure and temperature prominently appears one-day lead to that from the observational data,which is more important from the standpoint of improving the safety of climbers who attempt to climb Mt. Everest peak.

CFD simulation of spontaneous coal combustion in irregular patterns of goaf with multiple points of leaking air

Based on the non-linear air leakage seepage equation for an anisotropic porous medium, on the seepage diffusion equation of multicomponent gas and on the seepage synthetic heat transfer equation of a porous medium, the numerical model for field flow problems of irregular patterns of a goaf with multiple points of leaking air is established and simultaneously solved by the upwind mode finite element method (G3 computer program). According to the complexity of irregular patterns of a goaf with multiple points of leaking air, the flow pattern in a large area of such a goaf and the variation in gases of methane, oxygen and CO and in temperature are theoretically described. In the calculation, the goaf is regarded as a caving anisotropic medium and the coupling effect of methane effusion on spontaneous combustion is considered. The simulation results agree well with practical experience. In addition, the spontaneous combustion process is also simulated, indicating that 1) the spontaneous combustion often takes place near the area where fresh air leaks in and 2) the fire sources can be classified into static and dynamic zones. Therefore, in practical fire preventing and extinguishing, we should clearly distinguish the upstream air leaking points from the downstream ones in order to take proper measures for leakage stopping.

Analysis of DNA Methylation of Gracilariopsis lemaneiformis Under Temperature Stress Using the Methylation Sensitive Amplification Polymorphism(MSAP) Technique

Gracilariopsis lemaneiformis is an economically important agarophyte, which contains high quality gel and shows a high growth rate. Wild population of G. lemaneiformis displayed resident divergence, though with a low genetic diversity as was revealed by amplified fragment length polymorphism(AFLP) and simple sequence repeat(SSR) analyses. In addition, different strains of G. lemaneiformis are diverse in morphology. The highly inconsistence between genetic background and physiological characteristics recommends strongly to the regulation at epigenetic level. In this study, the DNA methylation change in G. lemaneiformis among different generation branches and under different temperature stresses was assessed using methylation sensitive amplified polymorphism(MSAP) technique. It was shown that DNA methylation level among different generation branches was diverse. The full and total methylated DNA level was the lowest in the second generation branch and the highest in the third generation. The total methylation level was 61.11%, 60.88% and 64.12% at 15℃, 22℃ and 26℃, respectively. Compared with the control group(22℃), the fully methylated and totally methylated ratios were increased in both experiment groups(15℃ and 26℃). All of the cytosine methylation/demethylation transform(CMDT) was further analyzed. High temperature treatment could induce more CMDT than low temperature treatment did.

Molecular Dynamics Simulations of Liquid Phosphorus at High Temperature and Pressure

By performing ab initio molecular dynamics simulations, we have investigated the microstructure, dynamical and electronic properties of liquid phosphorus （P） under high temperature and pressure. In our simulations, the calculated coordination number （CN） changes discontinuously with density, and seems to increase rapidly after liquid P is compressed to 2.5 g/cm3. Under compression, liquid P shows the first-order liquid-liquid phase transition from the molecular liquid composed of the tetrahedral P4 molecules to complex polymeric form with three-dimensional network structure, accompanied by the nonmetal to metal transition of the electronic structure. The order parameters Q6 and Q4 are sensitive to the microstructural change of liquid P. By calculating diffusion coefficients, we show the dynamical anomaly of liquid P by compression. At lower temperatures, a maximum exists at the diffusion coefficients as a function of density; at higher temperatures, the anomalous behavior is weakened. The excess entropy shows the same phenomena as the diffusion coefficients. By analysis of the angle distribution functions and angular limited triplet correlation functions, we can clearly find that the Peierls distortion in polymeric form of liquid P is reduced by further compression.

Chaos Transfer in Fluidized Beds Accompanied with Biomass Pyrolysis

Experiments of biomass pyrolysis were carried out in a fluidized bed, and dynamic signals of pressure and temperature were recorded. Correlation dimension was employed to characterize the chaotic behavior of pressure and temperature signals. Both pressure and temperature signals exhibit chaotic behavior, and the chaotic behavior of temperature signals is always weaker than that of pressure signals. Chaos transfer theory was advanced to explain the above phenomena. The discussion on the algorithm of the correlation dimension shows that the distance definition based on rhombic neighborhood is a better choice than the traditional one based on spherical neighborhood. The former provides a satisfactory result in a much shorter time.

Parameters affect foaming and foam stability during foam drilling

The authors presented indoor practice experiments of parameters affect on foaming and foam stability. Experiments were carried out and special equipments were used to determine foaming and foam stability; tests were tabulated and charted. The effects of chemical and physical parameters on foaming and foam stability have been conducted.

A non-invasive method for gastrointestinal parameter monitoring

AIM: To propose a new, non-invasive method for monitoring 24-h pressure, temperature and pH value in gastrointestinal tract.METHODS: The authors developed a miniature, multifunctional gastrointestinal monitoring system, which comprises a set of indigestible biotelemetry capsules and a data recorder.The capsule, after ingested by patients, could measure pressure, temperature and pH value in the gastrointestinal tract and transmit the data to the data recorder outside the body through a 434 MHz radio frequency data link. After the capsule passed out from the body, the data saved in the recorder were downloaded to a workstation via a special software for further analysis and comparison.RESULTS: Clinical experiments showed that the biotelemetry capsules could be swallowed by volunteers without any difficulties. The data recorder could receive the radio frequency signals transmitted by the biotelemetry in the body. The biotelemetry capsule could pass out from the body without difficulties. No discomfort was reported by any volunteer during the experiment. In vivo pressure and temperature data were acquired.CONCLUSION: A non-invasive method for monitoring 24-h gastrointestinal parameters was proposed and tested by the authors. The feasibility and functionality of this method are verified by laboratory tests and clinical experiments.

Behavior of concrete and concrete-filled circular steel tubular stub columns at constant high temperatures

Based on reanalyzing test results of uniaxial compressive behavior of concrete at constant high temperatures in China, with the compressive cube strength of concrete from 20 to 80 MPa, unified formulas for uniaxial compressive strength, elastic modulus, strain at peak uniaxial compression and mathematical expression for unaxial compressive stress-strain relations for the concrete at constant high temperatures were studied. Furthermore, the axial stress-axial strain relations between laterally confined concrete under axial compression and multiaxial stress-strain relations for steel at constant high temperatures were studied. Finally, based on continuum mechanics, the mechanics model for concentric cylinders of circular steel tube with concrete core of entire section loaded at constant high temperatures was established. Applying elasto-plastic analysis method, a FORTRAN program was developed, and the concrete-filled circular steel tubular （CFST） stub colunms at constant high temperatures were analyzed. The analysis results are in agreement with the experiment ones from references.