对建筑砌体结构裂缝的分析及设计改进措施

建筑结构在施工和使用过程中经常会出现裂缝,文章通过工程实例,对砌体结构中由收缩、温度应力引起的裂缝进行了分析,有针对性的提出改进措施,并提出提高砌体结构设计质量的改进措施,为结构设计者提供参考。

对于高锰酸钾消耗量的测定中遇到的问题看法及应对

本文对高锰酸钾消耗量的测定中遇到的众多现实问题进行分析及应对,使实验可以简化为对一个高锰酸钾(c(1/5KMnO_4)=0.1mol/L)标准溶液的标定,掌握和了解了高锰酸钾、草酸、草酸钠物理化学性质,使分析操作灵活,易掌控。

Improvement of thermal performance of envelopes for traditional wooden vernacular dwellings of Tujia Minority in Western Hunan,China

Thermal performance of envelopes and indoor thermal environment were technologically improved for traditional wooden vernacular dwellings of Tujia Minority in Western Hunan, China, on the premise of protecting their conventional styles. Thermal insulation boards and wooden boards were added to the interior side of external walls of vernacular dwellings to form two layers of air cavities, so as to gain excellent thermal performance. The indoor temperature of such dwellings after reconstruction was apparently improved compared with the data before reconstruction both in winter and summer, which verified the feasibility and the effectiveness of the reconstruction technologies proposed.

Improvement of Mono-window Algorithm for Retrieving Land Surface Temperature from HJ-1B Satellite Data

The thermal infrared channel (IRS4) of HJ-1B satellite obtains view zenith angles (VZA) up to ±33°. The view angle should be taken into account when retrieving land surface temperature (LST) from IRS4 data. This study aims at improving the mono-window algorithm for retrieving LST from IRS4 data. Based on atmospheric radiative transfer simulations,a model for correcting the VZA effects on atmospheric transmittance is proposed. In addition,a generalized model for calculating the effective mean atmospheric temperature is developed. Validation with the simulated dataset based on standard atmospheric profiles reveals that the improved mono-window algorithm for IRS4 obtains high accuracy for LST retrieval,with the mean absolute error (MAE) and root mean square error (RMSE) being 1.0 K and 1.1 K,respectively. Numerical experiment with the radiosonde profile acquired in Beijing in winter demonstrates that the improved mono-window algorithm exhibits excellent ability for LST retrieval,with MAE and RMSE being 0.6 K and 0.6 K,respectively. Further application in Qinghai Lake and comparison with the Moderate-Resolution Imaging Spectroradiometer (MODIS) LST product suggest that the improved mono-window algorithm is applicable and feasible in actual conditions.

Field Performance Analysis of Shoes Used in the Takraw Games in Malaysia

Using proper footwear is crucial to avoid pain, deformations and injuries on foot. For athletes, a pair of good shoes is vital for comfort and may add to performance improvement. The main objective of this study is to study the performance of some commonly used shoes in the takraw games by using experimental tests and thermal measurements. The momentum and kinetic energies that were generated by the takraw shoes were also measured. The methods used in this study included free fall test, impact force analysis and surface thermal assessment. From the outcomes of the experiments, it was found that the prototype FA shoe was better in absorption of momentum and impact force than the other shoes and also with lower surface temperature after the trial game. These outcomes suggested that it was more suitable to be worn by the takraw players for better performance. All the information obtained from this study are particularly useful for improvement on the current design oftakraw shoe.

Study on Control Performance of Bearing Temperature based on Genetic Algorithm

In order to improve the control effect of the bearing, this article studies the temperature control technology to improve the genetic algorithm, at the same time, analyze temperature simulation of bearing based on fuzzy PID control technology and improved genetic algorithm, the simulation results show that, the control method has good robustness based on Improved Genetic Algorithm. It can monitor a plurality of beating temperature, provides a new method for the detection and prevention of bearing fault.

Modified two-phase anaerobic baffled process for low-concentration wastewater treatment

In this study low-concentration wastewater was investigated in the integral two-phase anaerobic baffled reactor by determining the removal of COD at various HRT,reflex ratios,and temperatures. Results indicate that the removal efficiency of COD is more than 90% at 25 ℃ and 10-h HRT with no wastewater recycled,and the removal efficiency is up to 88% at 8-h HRT and reflex ratio of 150%. The removal efficiency is decreased with the decreasing temperature and HRT. The removal efficiency of COD is approximately 60% at 10 ℃,which proves that the temperature does not affect it apparently. This research has significance for reducing the cost of wastewater and sludge treatment in cold area.

Performance Improvements in Raman Distributed Temperature Sensor

The fiber optic distributed temperature sensor （DTS） is one of the most outstanding means to measure temperature distribution along an optical fiber. In this paper, we propose a novel calibration technique to measure the temperature highly accurately over a wide range of temperatures. We also propose an improved double-ended configuration that is insusceptible to the differential loss change in the fiber and suitable for the field use. Then, we developed an interrogator that had high robustness in harsh environments.

Study of Cycle Output Improvement by Work-Fluid Including Phase Change Material

This paper deals with the output improvement of heating and cooling cycle by using the work-fluid including phase change material.The experimental study is carried out by heat exchange between work-fluid and heat transfer surface.The work-fluid is flown to a high temperature or a low temperature heat transfer surface from the narrow path.In order to increase the amount of the heat transmission,a trace of Diethylether(boiling point 34.8 ℃),as a phase change material(PCM),is added to the work-fluid.The parameters of the experiment are additive amount of PCM,the rotational speed of the displacer piston and the temperature of heat transfer surface.It is clarified that the increasing of engine cycle output is brought by the PCM addition.The effect of PCM addition is evaluated by output ratio which is defined from the experimental cycle output data.The requirements for acquiring the increasing effect of output by adding PCM are clarified.