期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于热学参数反演分析的常态大坝混凝土温度场仿真 被引量:15
1
作者 赵志方 戴佳敏 吉顺文 《浙江工业大学学报》 CAS 北大核心 2019年第1期1-5,共5页
为获得精度较高的常态大坝混凝土温度场仿真计算结果,需要较为准确的可用于温度场仿真计算的混凝土热学参数。结合某常态重力坝工程和现场原位温度场试验结果,对混凝土热学计算参数进行反演分析,并运用所得的反演分析成果对该重力坝温... 为获得精度较高的常态大坝混凝土温度场仿真计算结果,需要较为准确的可用于温度场仿真计算的混凝土热学参数。结合某常态重力坝工程和现场原位温度场试验结果,对混凝土热学计算参数进行反演分析,并运用所得的反演分析成果对该重力坝温度场进行仿真模拟。结果表明:通过反演参数仿真模拟所得的大坝温度计算值与其相应测点的实测值吻合,反演结果可靠,可有效提高常态大坝混凝土温度场仿真模拟精度,为指导大坝混凝土现场施工提供参考。 展开更多
关键词 大坝混凝土 热学参数 反演分析 温度仿真模拟
下载PDF
回音壁模式微波谐振腔温度模拟研究与设计
2
作者 于莉莉 张广明 +1 位作者 卢锦川 童文雨 《仪表技术与传感器》 CSCD 北大核心 2018年第10期113-116,122,共5页
回音壁模式微波谐振腔用于工业温度精密测量具有测量精度高、抗震性强、成本低等优点。该文对直径和高度均为12 mm的圆柱状蓝宝石及其2倍尺寸的铜腔进行温度模拟仿真,通过对谐振频率和品质因数与温度的变化关系进行研究,并与实验结果进... 回音壁模式微波谐振腔用于工业温度精密测量具有测量精度高、抗震性强、成本低等优点。该文对直径和高度均为12 mm的圆柱状蓝宝石及其2倍尺寸的铜腔进行温度模拟仿真,通过对谐振频率和品质因数与温度的变化关系进行研究,并与实验结果进行对比,获得仿真结果的温度测量精度,为微波谐振腔测温仪的小型化和高精密研究提供参考,加快其在高精密工业测温领域的广泛应用。 展开更多
关键词 回音壁模式 微波谐振腔 温度模拟仿真 温度测量 工业精密测量 蓝宝石
下载PDF
Impacts of salinity parameterizations on temperature simulation over and in a hypersaline lake 被引量:2
3
作者 文莉娟 NAGABHATLA Nidhi +2 位作者 赵林 李照国 陈世强 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2015年第3期790-801,共12页
In this paper,we introduced parameterizations of the salinity effects(on heat capacity,thermal conductivity,freezing point and saturated vapor pressure) in a lake scheme integrated in the Weather Research and Forecast... In this paper,we introduced parameterizations of the salinity effects(on heat capacity,thermal conductivity,freezing point and saturated vapor pressure) in a lake scheme integrated in the Weather Research and Forecasting model coupled with the Community Land Model(WRF-CLM). This was done to improve temperature simulation over and in a saline lake and to test the contributions of salinity effects on various water properties via sensitivity experiments. The modified lake scheme consists of the lake module in the CLM model,which is the land component of the WRF-CLM model. The Great Salt Lake(GSL) in the USA was selected as the study area. The simulation was performed from September 3,2001 to September 30,2002. Our results show that the modif ied WRF-CLM model that includes the lake scheme considering salinity effects can reasonably simulate temperature over and in the GSL. This model had much greater accuracy than neglecting salinity effects,particularly in a very cold event when that effect alters the freezing point. The salinity effect on saturated vapor pressure can reduce latent heat flux over the lake and make it slightly warmer. The salinity effect on heat capacity can also make lake temperature prone to changes. However,the salinity effect on thermal conductivity was found insignificant in our simulations. 展开更多
关键词 temperature simulation salinity parameterizations WRF-CLM Great Salt Lake
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部