Total site heat integration(TSHI) provides more opportunities for energy saving in industry clusters. Some design methods including direct integration using process streams and indirect integration using intermediate-...Total site heat integration(TSHI) provides more opportunities for energy saving in industry clusters. Some design methods including direct integration using process streams and indirect integration using intermediate-fluid circuits, i.e., steam, dowtherms and hot water, have been proposed during last few decades. Indirect heat integration is preferred when the heat sources and sinks are separated in independent plants with rather long distance. This improves energy efficiency by adaption of intermediate fluid circle which acts as a utility provider for plants in a symbiotic network. However, there are some significant factors ignored in conventional TSHI, i.e. the investment of pipeline, cost of pumping and heat loss. These factors simultaneously determine the possibility and performance of heat integration. This work presents a new methodology for indirect heat integration in low temperature range using hot water circuit as intermediate-fluid medium. The new methodology enables the targeting of indirect heat integration across plants considering the factors mentioned earlier. An MINLP model with economic objective is established and solved. The optimization results give the mass flow rate of intermediate-fluid, diameter of pipeline, the temperature of the circuits and the matches of heat exchanger networks(HENS) automatically. Finally, the application of this proposed methodology is illustrated with a case study.展开更多
According to the law of conservation in the state of turbulent flow, the differential equation describing the airflow temperature distribution in drifting tunnel is derived, By theoretical analysis and field measureme...According to the law of conservation in the state of turbulent flow, the differential equation describing the airflow temperature distribution in drifting tunnel is derived, By theoretical analysis and field measurement of the airflow and thermal process in mine, theoretical analysis and systematic flow are developed. By PHONENICS program, the numerical simulation is processed, and the changing rule of airflow temperature with various parameters in drifting tunnel is derived. The airflow temperature in drifting tunnel decreases as the airflow velocity increases in a way of negative power exponent, and elevates linearly as the temperature of the incoming airflow elevates.展开更多
An experimental investigation was conducted to measure the temperature variation across the flow channel and to determine the performance of a natural convection solar air heater at various tilt angles from 15, 30 and...An experimental investigation was conducted to measure the temperature variation across the flow channel and to determine the performance of a natural convection solar air heater at various tilt angles from 15, 30 and 45°. The results of the temperature profile across the air gap showed that heat transfer from the absorber plate to the air stream was mainly by convection. At a particular section, mean air temperature could be calculated from the arithmetic mean of the temperature profile across the air gap to within ± 2 ℃. The axial air temperature distribution was non linear and did not increase much beyond 1 m of collector length. It tended to decrease towards the end of the collector. Overall glass, absorber plate and mean air temperatures over the entire length of the solar air heater could be determined by averaging the mean axial temperatures to within ± 2 ℃. The heater performed better as inclination increased.展开更多
基金Supported by the National Basic Research Program of China(2012CB720500)the National Natural Science Foundation of China(21476256)
文摘Total site heat integration(TSHI) provides more opportunities for energy saving in industry clusters. Some design methods including direct integration using process streams and indirect integration using intermediate-fluid circuits, i.e., steam, dowtherms and hot water, have been proposed during last few decades. Indirect heat integration is preferred when the heat sources and sinks are separated in independent plants with rather long distance. This improves energy efficiency by adaption of intermediate fluid circle which acts as a utility provider for plants in a symbiotic network. However, there are some significant factors ignored in conventional TSHI, i.e. the investment of pipeline, cost of pumping and heat loss. These factors simultaneously determine the possibility and performance of heat integration. This work presents a new methodology for indirect heat integration in low temperature range using hot water circuit as intermediate-fluid medium. The new methodology enables the targeting of indirect heat integration across plants considering the factors mentioned earlier. An MINLP model with economic objective is established and solved. The optimization results give the mass flow rate of intermediate-fluid, diameter of pipeline, the temperature of the circuits and the matches of heat exchanger networks(HENS) automatically. Finally, the application of this proposed methodology is illustrated with a case study.
文摘According to the law of conservation in the state of turbulent flow, the differential equation describing the airflow temperature distribution in drifting tunnel is derived, By theoretical analysis and field measurement of the airflow and thermal process in mine, theoretical analysis and systematic flow are developed. By PHONENICS program, the numerical simulation is processed, and the changing rule of airflow temperature with various parameters in drifting tunnel is derived. The airflow temperature in drifting tunnel decreases as the airflow velocity increases in a way of negative power exponent, and elevates linearly as the temperature of the incoming airflow elevates.
文摘An experimental investigation was conducted to measure the temperature variation across the flow channel and to determine the performance of a natural convection solar air heater at various tilt angles from 15, 30 and 45°. The results of the temperature profile across the air gap showed that heat transfer from the absorber plate to the air stream was mainly by convection. At a particular section, mean air temperature could be calculated from the arithmetic mean of the temperature profile across the air gap to within ± 2 ℃. The axial air temperature distribution was non linear and did not increase much beyond 1 m of collector length. It tended to decrease towards the end of the collector. Overall glass, absorber plate and mean air temperatures over the entire length of the solar air heater could be determined by averaging the mean axial temperatures to within ± 2 ℃. The heater performed better as inclination increased.
