针对小弯曲半径钛管弯曲成形问题,采用差温推弯成形方法开展了弯曲半径为0.9 D (D为管材外径)的小弯曲半径钛管弯曲成形试验。研究分析了成形弯管的外观质量、壁厚分布规律和关键区域材料的微观组织特点。结果表明差温推弯成形方法能够...针对小弯曲半径钛管弯曲成形问题,采用差温推弯成形方法开展了弯曲半径为0.9 D (D为管材外径)的小弯曲半径钛管弯曲成形试验。研究分析了成形弯管的外观质量、壁厚分布规律和关键区域材料的微观组织特点。结果表明差温推弯成形方法能够有效应用于成形弯曲半径为0.9 D的小弯曲半径钛合金管,成形弯管表面质量好、壁厚减薄少、弯曲外侧材料组织变细小。展开更多
Initial firing temperatures play an important role on the combustion rate of propellant. In gun propellants, initial temperature is a key factor for both accuracy and safety. Ideally, the initial temperature of the pr...Initial firing temperatures play an important role on the combustion rate of propellant. In gun propellants, initial temperature is a key factor for both accuracy and safety. Ideally, the initial temperature of the propellant should not influence the ballistic properties of the round. Nevertheless, constant initial temperature coefficients can not be achieved easily. This work focuses on the influence of the firing temperature on the ballistic properties, the mechanical integrity and the sensitivity to impact of nitrocellulose based propellants. Combustion rates have been determined by closed vessel tests. Ballistic properties have been investigated by firing 5.56 cartridges. The propellants have been conditioned at temperatures ranging from -54 ℃ to ＋71 ℃ before firing. The largest temperature coefficient is observed at high temperatures. The temperature sensitivity of the peak pressure in the combustion chamber can not be fully explained by the results from the closed vessel test. The authors speculated that the mechanical behaviour of the propellant grains at low temperatures influences also the overall ballistic properties of the round. Impact tests with propellants conditioned at low and high temperatures permit to investigate their mechanical strength under extreme temperatures and to better understand the propellant performance during firing. Tests on aged propellants have been conducted as well.展开更多
The dividing wall column （DWC） is considered as a major breakthrough in distillation technology and has good prospect of industrialization. Model predictive control （MPC） is an advanced control strategy that has a...The dividing wall column （DWC） is considered as a major breakthrough in distillation technology and has good prospect of industrialization. Model predictive control （MPC） is an advanced control strategy that has acquired extensive applications in various industries. In this study, MPC is applied to the process for separating ethanol, n-propanol, and n-butanol ternary mixture in a fully thermally coupled DWC. Both composition control and tem- perature inferent/al control are considered. The multiobjective genetic algor/thm function ＂gamult/obj＂ in Matlab is used for the weight tuning of MPC. Comparisons are made between the control performances of MPC and PI strategies. Simulation results show that although both MPC and PI schemes can stabilize the DWC in case of feed disturbances, MPC generally behaves better than the PI strategy for both composition control and tempera- ture inferential control, resulting in a more stable and superior performance with lower values of integral of squared error （ISE）.展开更多
In order to investigate the oxidation kinetics of gas coal at low temperatures, we derived a rate equation of oxygen consumption during low-temperature oxidation of gas coal and deduced an E-c equation, expressing the...In order to investigate the oxidation kinetics of gas coal at low temperatures, we derived a rate equation of oxygen consumption during low-temperature oxidation of gas coal and deduced an E-c equation, expressing the relation between active energy E and oxygen concentration c. The reaction order n and active energy E were calculated with this equation based on experiments of static oxygen consumption tests. In addition, we proved the rationality of the E-c equation using a kinetic compensation effect and obtained the isokinetic temperature Tc. The results show that： 1） the gas coal oxidizes easily with increasing temperature and the oxidation tends to be spontaneous at higher temperatures; 2） the oxygen concentration c affects oxygen consumption very much at lower temperatures but has only a small effect at higher temperatures; 3） the isokinetic temperature Tc was 127 ℃ which has been experimentally validated as the key turning point during low-temperature spontaneous combustion of gas coal.展开更多
According to the two-dimensional(2-D) thermo-elasticity theory, the exact elasticity solution of the simply supported laminated beams subjected to thermo-loads was studied. An analytical method was presented to obtain...According to the two-dimensional(2-D) thermo-elasticity theory, the exact elasticity solution of the simply supported laminated beams subjected to thermo-loads was studied. An analytical method was presented to obtain the temperature, displacement and stress fields in the beam. Firstly, the general solutions of temperature, displacements and stresses for a single-layered simply supported beam were obtained by solving the 2-D heat conduction equation and the 2-D elasticity equations, respectively. Then, based on the continuity of temperature, heat flux, displacements and stresses on the interface of two adjacent layers, the formulae of temperature, displacements and stresses between the lowest layer and the top layer of the beam were derived out in a recurrent manner. Finally, the unknown coefficients in the solutions were determined by the use of the upper surface and lower surface conditions of the beam. The distributions of temperature, displacement and stress in the beam were obtained by substituting these coefficients back to the recurrence formulae and the solutions. The excellent convergence of the present method has been demonstrated and the results obtained by the present method agree well with those from the finite element method. The effects of surface temperatures, thickness, layer number and material properties of the plate on the temperature distribution were discussed in detail. Numerical results reveal that the displacements and stresses monotonically increase with the increase of surface temperatures. In particular, the horizontal stresses are discontinuous at the interface.展开更多
The increasing awareness of climate change has led organizations to demand a standard procedure to measure and communicate greenhouse gas(GHG) emissions linked to their products or services.The publicly available spec...The increasing awareness of climate change has led organizations to demand a standard procedure to measure and communicate greenhouse gas(GHG) emissions linked to their products or services.The publicly available specification PAS 2050 has been developed in response to broad community and industry desire for a consistent method-carbon footprint for assessing the life cycle GHG emissions of goods and services.Specifically,this paper illustrates the implementation of carbon footprint for a baby stroller in accordance with PAS 2050.A fial value of 321 kg per one stroller including package was calculated.Moreover,the study led to identify raw materials production of the stroller as the main source of GHS emissions where efforts need to focus for emission reduction opportunities.This case study is hoped to be a starting point for organizations to benefit from the increasing application of carbon footprint assessment.展开更多
Objective： In order to compare the therapeutic effects between warming needle moxibustion plus Tuina therapy and single Tuina therapy for shoulder periarthritis. Methods： By random single blind control method, 80 ca...Objective： In order to compare the therapeutic effects between warming needle moxibustion plus Tuina therapy and single Tuina therapy for shoulder periarthritis. Methods： By random single blind control method, 80 cases were divided randomly into Group A （single Tuina group） and Group B （warming needle method plus Tuina group）, 40 cases in each group. Results： The effective rate was 95.0% in Group B and 85.0% in Group A, without significant difference （P〉0.05） in comparison between two groups. In assessment of Visual Analogue Scale, there was obvious decrease in both groups before and after the treatments （P〈0.01）. In comparison of VAS score differences between the two groups after the treatments, there was remarkable significant difference （P〈0.01）. Conclusion： Warming needle moxibustion plus Tuina is better than single Tuina therapy in stopping pain.展开更多
文摘针对小弯曲半径钛管弯曲成形问题,采用差温推弯成形方法开展了弯曲半径为0.9 D (D为管材外径)的小弯曲半径钛管弯曲成形试验。研究分析了成形弯管的外观质量、壁厚分布规律和关键区域材料的微观组织特点。结果表明差温推弯成形方法能够有效应用于成形弯曲半径为0.9 D的小弯曲半径钛合金管,成形弯管表面质量好、壁厚减薄少、弯曲外侧材料组织变细小。
文摘Initial firing temperatures play an important role on the combustion rate of propellant. In gun propellants, initial temperature is a key factor for both accuracy and safety. Ideally, the initial temperature of the propellant should not influence the ballistic properties of the round. Nevertheless, constant initial temperature coefficients can not be achieved easily. This work focuses on the influence of the firing temperature on the ballistic properties, the mechanical integrity and the sensitivity to impact of nitrocellulose based propellants. Combustion rates have been determined by closed vessel tests. Ballistic properties have been investigated by firing 5.56 cartridges. The propellants have been conditioned at temperatures ranging from -54 ℃ to ＋71 ℃ before firing. The largest temperature coefficient is observed at high temperatures. The temperature sensitivity of the peak pressure in the combustion chamber can not be fully explained by the results from the closed vessel test. The authors speculated that the mechanical behaviour of the propellant grains at low temperatures influences also the overall ballistic properties of the round. Impact tests with propellants conditioned at low and high temperatures permit to investigate their mechanical strength under extreme temperatures and to better understand the propellant performance during firing. Tests on aged propellants have been conducted as well.
基金Supported by the National Natural Science Foundation of China(21676299,21476261and 21606255)
文摘The dividing wall column （DWC） is considered as a major breakthrough in distillation technology and has good prospect of industrialization. Model predictive control （MPC） is an advanced control strategy that has acquired extensive applications in various industries. In this study, MPC is applied to the process for separating ethanol, n-propanol, and n-butanol ternary mixture in a fully thermally coupled DWC. Both composition control and tem- perature inferent/al control are considered. The multiobjective genetic algor/thm function ＂gamult/obj＂ in Matlab is used for the weight tuning of MPC. Comparisons are made between the control performances of MPC and PI strategies. Simulation results show that although both MPC and PI schemes can stabilize the DWC in case of feed disturbances, MPC generally behaves better than the PI strategy for both composition control and tempera- ture inferential control, resulting in a more stable and superior performance with lower values of integral of squared error （ISE）.
基金financial support provided by the National Key Technology R&D Program during the 11th Five-Year Period (No. 2006BAK03B05)the National Natural Science Foundation of China (Nos.50534090, 50674090 and 50804047)+1 种基金the Research Fund of the State Key Laboratory of Coal Resources and Mine Safety, China University of Mining and Technology (Nos.08KF14 and SKLCRSM09X04)the Scien-tific Research Foundation of China University of Mining & Technology (No.2007A001)
文摘In order to investigate the oxidation kinetics of gas coal at low temperatures, we derived a rate equation of oxygen consumption during low-temperature oxidation of gas coal and deduced an E-c equation, expressing the relation between active energy E and oxygen concentration c. The reaction order n and active energy E were calculated with this equation based on experiments of static oxygen consumption tests. In addition, we proved the rationality of the E-c equation using a kinetic compensation effect and obtained the isokinetic temperature Tc. The results show that： 1） the gas coal oxidizes easily with increasing temperature and the oxidation tends to be spontaneous at higher temperatures; 2） the oxygen concentration c affects oxygen consumption very much at lower temperatures but has only a small effect at higher temperatures; 3） the isokinetic temperature Tc was 127 ℃ which has been experimentally validated as the key turning point during low-temperature spontaneous combustion of gas coal.
基金Project(2012CB026205)supported by the National Basic Research Program of ChinaProject(51238003)supported by the National Natural Science Foundation of ChinaProject(2014Y01)supported by the Transportation Department of Jiangsu Province,China
文摘According to the two-dimensional(2-D) thermo-elasticity theory, the exact elasticity solution of the simply supported laminated beams subjected to thermo-loads was studied. An analytical method was presented to obtain the temperature, displacement and stress fields in the beam. Firstly, the general solutions of temperature, displacements and stresses for a single-layered simply supported beam were obtained by solving the 2-D heat conduction equation and the 2-D elasticity equations, respectively. Then, based on the continuity of temperature, heat flux, displacements and stresses on the interface of two adjacent layers, the formulae of temperature, displacements and stresses between the lowest layer and the top layer of the beam were derived out in a recurrent manner. Finally, the unknown coefficients in the solutions were determined by the use of the upper surface and lower surface conditions of the beam. The distributions of temperature, displacement and stress in the beam were obtained by substituting these coefficients back to the recurrence formulae and the solutions. The excellent convergence of the present method has been demonstrated and the results obtained by the present method agree well with those from the finite element method. The effects of surface temperatures, thickness, layer number and material properties of the plate on the temperature distribution were discussed in detail. Numerical results reveal that the displacements and stresses monotonically increase with the increase of surface temperatures. In particular, the horizontal stresses are discontinuous at the interface.
基金financially and technically supported by Bugaboo (Xiamen) Companythe Fundamental Research Funds No. 2010121035 for the Central Universities of China
文摘The increasing awareness of climate change has led organizations to demand a standard procedure to measure and communicate greenhouse gas(GHG) emissions linked to their products or services.The publicly available specification PAS 2050 has been developed in response to broad community and industry desire for a consistent method-carbon footprint for assessing the life cycle GHG emissions of goods and services.Specifically,this paper illustrates the implementation of carbon footprint for a baby stroller in accordance with PAS 2050.A fial value of 321 kg per one stroller including package was calculated.Moreover,the study led to identify raw materials production of the stroller as the main source of GHS emissions where efforts need to focus for emission reduction opportunities.This case study is hoped to be a starting point for organizations to benefit from the increasing application of carbon footprint assessment.
文摘Objective： In order to compare the therapeutic effects between warming needle moxibustion plus Tuina therapy and single Tuina therapy for shoulder periarthritis. Methods： By random single blind control method, 80 cases were divided randomly into Group A （single Tuina group） and Group B （warming needle method plus Tuina group）, 40 cases in each group. Results： The effective rate was 95.0% in Group B and 85.0% in Group A, without significant difference （P〉0.05） in comparison between two groups. In assessment of Visual Analogue Scale, there was obvious decrease in both groups before and after the treatments （P〈0.01）. In comparison of VAS score differences between the two groups after the treatments, there was remarkable significant difference （P〈0.01）. Conclusion： Warming needle moxibustion plus Tuina is better than single Tuina therapy in stopping pain.
