期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
660MW机组锅炉减温水管路设计和三维管路布置 被引量:2
1
作者 陈卿淳 《锅炉技术》 北大核心 2020年第2期26-31,共6页
通过减温水的喷水作用,把主蒸汽温度控制在设定值,对于电站锅炉来说至关重要,主要针对660 MW超超临界锅炉的减温水管路的管径计算、管道附件和阀门等的选型等对减温水管路的设计进行说明,并对运用PDMS三维工厂设计软件直接进行三维布置... 通过减温水的喷水作用,把主蒸汽温度控制在设定值,对于电站锅炉来说至关重要,主要针对660 MW超超临界锅炉的减温水管路的管径计算、管道附件和阀门等的选型等对减温水管路的设计进行说明,并对运用PDMS三维工厂设计软件直接进行三维布置管路的方式做介绍,以突出三维布置管路相比较于传统二维平面布置所具有的优势。 展开更多
关键词 锅炉温水 PDMS 三维管路布置
下载PDF
SHL20-13型蒸汽锅炉汽改水的改造
2
作者 周奕全 时瑞生 膝玉川 《有色冶金节能》 2002年第2期43-45,共3页
本文介绍了东北轻合金有限责任公司2#蒸汽锅炉改温水锅炉的设计方案及实施后达到的效果。
关键词 蒸汽锅炉 温水锅炉 改造设计
下载PDF
锅炉调节阀后过渡管泄漏分析及防范
3
作者 代发明 杨再贵 +1 位作者 谭光伟 何春林 《贵州电力技术》 2010年第5期40-42,共3页
针对某火电厂减温水管调节阀后过渡管在使用中发生泄漏的问题,从设计制造和实际工况等方面进行了综合分析,找出泄漏原因,从中提出有效的防范措施,从而避免减温水管调节阀后过渡管爆漏而造成锅炉停运、对现场巡视人员的人身安全造成... 针对某火电厂减温水管调节阀后过渡管在使用中发生泄漏的问题,从设计制造和实际工况等方面进行了综合分析,找出泄漏原因,从中提出有效的防范措施,从而避免减温水管调节阀后过渡管爆漏而造成锅炉停运、对现场巡视人员的人身安全造成的威胁等重大事故的发生,具有良好的社会效益和经济效益。 展开更多
关键词 锅炉温水 泄漏 雷诺数 防范措施
下载PDF
High Temperature Corrosion of Water Wall Materials T23 and T24 in Simulated Furnace Atmospheres 被引量:8
4
作者 赵钦新 张知翔 +2 位作者 成丁南 王云刚 邓翔 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2012年第4期814-822,共9页
Candidate materials for water wall of supercritical and ultra-supercritical utility boilers,T23 and T24,were chosen as the experimental samples and exposed to oxidizing atmosphere,reducing atmosphere and oxidizing/red... Candidate materials for water wall of supercritical and ultra-supercritical utility boilers,T23 and T24,were chosen as the experimental samples and exposed to oxidizing atmosphere,reducing atmosphere and oxidizing/reducing alternating atmosphere separately.The corrosion temperature was 450-550?C.The effects of oxygen con-tent and temperature on the corrosion in reducing atmosphere and alternating atmosphere were investigated.The scanning electron microscope(SEM) and energy dispersive spectrometer(EDS) were used to examine the corroded samples.The results show that the corrosion kinetics of T23 and T24 can be described by the double logarithmic equation and parabolic equation respectively.To describe the corrosion of materials accurately it is not sufficient to analyze the macro-mass gain and the macro-thickness of the corroded layer only,but the EDS should be applied to examine the migration depth of corrosive elements O and S.It is revealed that the corrosion becomes more severe when H2S is present in the corrosive gas.S is more active than O,and Cr can reduce the migration of oxygen but not S.The combination corrosion of S and O and pure [S] has a stronger corrodibility than pure H2S.T24 suffers the most severe corrosion at oxygen content of 0.8%.Corrosion is aggravated when the corrosion temperature is above 450 ℃ in the alternating atmosphere.T23 has better corrosion resistance than T24 and W contributes a lot to the corrosion resistance of T23. 展开更多
关键词 stainless steel mass gain element migration high temperature corrosion
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部