In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using...In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using a dynamic shear rheometer(DSR). The softening points and the rheological parameters of the asphalt samples were measured and analyzed. The results indicated that at the softening point temperature the neat asphalt and the SBS modified asphalt showed two different rheological states. The neat asphalt binders had a majority of viscous components in viscoelastic composition, with the phase angles being mostly higher than 80 o. The SBS modified binders had lower phase angles, with their elasticity still retained. Meanwhile, the Shapiro-Wilk normality test showed that at a confidence level of 0.05, at whatever aging state, the neat asphalt had a stable complex modulus corresponding to the softening point, which was 13.034 kPa at a standard deviation of 2.105 kPa under the same test condition. The softening point of neat asphalt binder can be calculated via the equivalent modulus rule. It is found out that there is a good relationship between the calculated and the measured softening points. And it is suggested that more data are needed to validate this finding.展开更多
In this paper several kinds of high temperature molten salts were investigated experimentally on viscosity-temperature characteristics with high-temperature viscometer.The viscosities of the molten salts were measured...In this paper several kinds of high temperature molten salts were investigated experimentally on viscosity-temperature characteristics with high-temperature viscometer.The viscosities of the molten salts were measured and compared with those from references to verify the reliability of the viscometer and measuring methods,and a good agreement was observed from the comparisons.Then,two new high-temperature molten salts were made from the HITEC salt by some additives and the viscosity-temperature profiles of them were obtained by experiments.The results show that the new molten salts have much lower viscosities,thus suitable for reducing the flow resistance in transportation system of high-temperature solar thermal power generation.展开更多
基金financially supported by the Shandong Natural Science Foundation (ZR2009FL020)the Shandong Transportation Innovation Foundation (2010Y20)
文摘In this paper, in order to investigate the viscoelasticity of asphalt binder at the softening point temperature, more than 30 different asphalt binders were selected and tested by dynamic rheological scan method using a dynamic shear rheometer(DSR). The softening points and the rheological parameters of the asphalt samples were measured and analyzed. The results indicated that at the softening point temperature the neat asphalt and the SBS modified asphalt showed two different rheological states. The neat asphalt binders had a majority of viscous components in viscoelastic composition, with the phase angles being mostly higher than 80 o. The SBS modified binders had lower phase angles, with their elasticity still retained. Meanwhile, the Shapiro-Wilk normality test showed that at a confidence level of 0.05, at whatever aging state, the neat asphalt had a stable complex modulus corresponding to the softening point, which was 13.034 kPa at a standard deviation of 2.105 kPa under the same test condition. The softening point of neat asphalt binder can be calculated via the equivalent modulus rule. It is found out that there is a good relationship between the calculated and the measured softening points. And it is suggested that more data are needed to validate this finding.
基金supported by the National Natural Science Foundation Key Project of China (Grant No. 50736005)the National Basic Research Program of China ("973" Program) (Grant No. 2010CB227103)
文摘In this paper several kinds of high temperature molten salts were investigated experimentally on viscosity-temperature characteristics with high-temperature viscometer.The viscosities of the molten salts were measured and compared with those from references to verify the reliability of the viscometer and measuring methods,and a good agreement was observed from the comparisons.Then,two new high-temperature molten salts were made from the HITEC salt by some additives and the viscosity-temperature profiles of them were obtained by experiments.The results show that the new molten salts have much lower viscosities,thus suitable for reducing the flow resistance in transportation system of high-temperature solar thermal power generation.
