溶剂萃取法回收粘胶短纤维塑化浴废水中锌

本文给出了溶剂萃取法回收粘胶短纤维塑化浴废水中锌的流程示意图,仔细探讨了锌萃取、锌反萃取以及铁洗脱等工艺过程和工艺参数的■择。

溶剂法萃取谷维素生产新工艺的研究

目前谷维素生产普遍采用碱溶酸析法生产工艺 ,谷维素得率为 35 %～ 4 0 %。为了提高谷维素的得率和米糠油的精炼率 ,研究了溶剂法萃取生产谷维素新工艺。研究中测定了谷维素在甲醇等溶剂中于不同pH值中的溶解性能 ;物理精炼脱酸的工艺参数与谷维素热分解损失率的关系 ,并确定了逆流萃取的效数为 2～ 3,萃取用甲醇的倍量为油重的 1 5～ 3 5。溶剂法萃取使谷维素总得率在原有基础上提高到 70 %以上 ,谷维素纯度超过 99% ,达到了优质品标准 ;精炼米糠油产出率比碱溶酸析法提高了 5 %以上。同时 ,物理精炼脱酸工艺应用于高酸值米糠油的精炼 ,不产生碱炼皂脚 。

溶剂法萃取漆树籽油工艺技术研究及应用

成果简介：该成果克服了传统加工工艺的不足，高效利用我国丰富的漆树资源，促进漆树资源的再生利用。同时深加工的产品，可以广泛用于高级化妆品、食品、医药保健等领域，具有很好的市场前景。主要研究内容如下：

超临界萃取的鹤草芽浸膏中鹤草酚成分研究

对由超临界萃取和溶剂法萃取的浸膏中酚性物应用化学方法进行了性质检验、失重检验 ,利用紫外光谱进一步确定了酚性物中的鹤草酚含量 ,通过对比再次证明了超临界萃取不仅萃取率高 ,而且萃取物中有效成分含量也高。

孜然油的亚临界萃取工艺规程

孜然，又名安息茴香、枯茗，气味芳香而浓烈，口感独特。作为新疆烤羊肉和印度咖喱粉的主要香料，享誉海内外。亚临界萃取是一项流体扩散分离萃取技术。与超临界二氧化碳萃取技术相比。具有操作压力低、工序简单、能耗低、投资少、易于工业化大规模生产等优点。与传统溶剂法萃取相比，此法优点是常温萃取、低温脱溶，植物蛋白不变性，溶剂易脱除，减少了“三废”排放。亚临界流体萃取能解决超临界萃取设备容积小、造价高、耗能大、不易大规模工业生产的缺陷。

室内空气中有害气体的浓缩预处理方法

本文从原理、应用和优缺点方面阐述了室内有害气体的浓缩预处理方法。包括固相萃取-溶剂解析(热解吸)法、固相微萃取法、衍生化反应浓缩处理法、溶剂浓缩预处理法及冷冻浓缩-热解吸法。根据被检测物质的性质来确定浓缩预处理方法。

Removal of chromium(Ⅲ) from aqueous waste solution by predispersed solvent extraction

The extraction experiments of chromium（W） from aqueous waste solution by predispersed solvent extraction （PDSE） process with extractant （HEHPEHE） and its mixture, including acidic extractant （D2EHPA）, alkaline extractant （TOA） and neutral extractant （TBP） were carried out respectively. It is found that the extractant HEHPEHE exhibited high extraction selectivity to chromium（III） from aqueous waste solution. The colloidal liquid aphrons （CLAs） were successfully generated using kerosene as a solvent, HEHPEHE as an extractant, sodium dodecyl benzene sulphate （SDBS） as a surfactant in aqueous phase and polyoxyethylene sorbitol anhydride monolaurate （Tween-20） in oil phase. To study the extraction efficiency and advantages of the PDSE process in the removal of chromium（III）, the effects of major factors, such as initial chromium（III） concentration, volume of colloidal gas aphrons （CGAs）, HEHPEHE volume fraction, phase ratio （solvent phase to water phase）, mass fraction of dodecyl trimethylammonium bromide （HTAB）, mass fraction of SDBS, mass fraction of Tween-20 and initial pH of aqueous waste solution were also investigated and the appropriate process conditions were obtained. Under the appropriate conditions, the extraction efficiency of chromium（III） above 99.9 % can be achieved and the treated aqueous waste solution can be discharged directly without polluting the environment.

Preparation and in Vitro Evaluation of Polylactic Acid (PLA) or Polylactic-co-Glycolic Acid (PLGA) Microcapsules Loaded with Estradiol

Aim PLA/PLGA was used as biodegradable and biocompatible carriers to achieve sustained release of estradiol (E 2). Methods Microcapsules (MC) were prepared by an emulsification solvent extraction method, and then the properties and in vitro drug release behavior of MC were examined. An analysis of variance (ANOVA) was used to test the statistical significance. Then, multiple comparisons were made with a T method between levels to examine the significance of difference further. For all the results a P value 】0 05 was considered statistically insignificant . Results Under the same conditions, the water adding speed and the particle size had significant effects ( P 【0 01) on the entrapment efficiency of MC; the water adding speed and the concentration of PLA in the oil phase had significant effects ( P 【0 01) on the diameter MC in medium. Release of E 2 from MC was influenced significantly ( P 【0 01) by the water adding speed and the type and molecule weight of the polymers. But the differences between levels of the variates were not all significant. Conclusion E 2 PLA/PLGA MC with various properties can be formed when the formulation and the technology were changed accordingly.

大豆磷脂提取脑磷脂

利用溶剂萃取法从大豆粗磷脂中分离得到脑磷脂(PE),并研究影响脑磷脂萃取率的各种因数,得到最佳工艺参数。

Recovery of Copper（II） and Nickel（II） from Plating Wastewater by Solvent Extraction

The solvent extraction technology, was applied to recover Cu^2＋ and Ni^2＋ from plating wastewater.Lix984N was chosen as the extractant due to-its gooff extraction performance. The influence parame-ters were examlned. The results show that the separation of Cu^2＋ and Ni＂ from sulphate medium can be realized by adjusting pH value with the help of Lix984N. For extracting Cu^2＋ and Ni^2＋, the optimal pH values are 4 and 10.5, and the maximal extraction percentages are 92.9% and 93.0%, respectively .With recovered Cu^2＋ and Ni^2＋ stripped in 170g.L^ -1 and 200 g.L^-1 H2SO4 medium, the stripping percentages of Cu^2＋ and Ni^2＋ are 92.9% and 93.0%, respectively. This method is simple and can be used to recover Cu^2＋ and Ni^2＋ from plating wastewater. And a flow sheet for separation of Cu^2＋ and Ni^2＋ is presented.

Recovery of nickel,cobalt,copper and zinc in sulphate and chloride solutions using synergistic solvent extraction

A number of synergistic solvent extraction （SSX） systems have been developed to recover nickel, cobalt, zinc and copper from sulphuric and chloride leach solutions by the solvent extraction team of CSIRO, Australia. These in- clude （1） Versatic 10/CLXS0 system for the separation of Ni from Ca in sulphate solutions, （2） Versatic 10/4PC system for the separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （3） Cyanex 471X/HRJ-4277 system for the separation of Zn from Cd in sulphate solutions, （4） Versatic 10/LIX63 system for the separation of Co from Mn/Mg/Ca in sulphate solutions, （5） Versatic 10/LIX63/TBP system for separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （6） Versatic 10/LIX63 system for the separation of cobalt from nickel in sulphate solutions by difference in kinetics, （7） Cyanex 272/LIX84 system for the separation of Cu/Fe/Zn from Ni/Co in sulphate solutions, （8） Versatic 10/LIX63fFBP system to recover Cu/Ni from strong chloride solutions, and [9） Versatic 10/LIX63 system to separate Cu from Fe in strong chloride solutions. The synergistic effect on metal separation and efficiency is presented and possible industrial applications are demonstrated. The chemical stability of selected SSX systems is also reported.

Solubilization of small molecules from coal and the resulting effects on the pore structure distribution

The solubilization of small molecules from coal by solvent extraction and the resulting effects on the pore distribution of a low rank coal were studied. Samples were extracted, in succession, with petroleum ether and with CS2. Extract and residue fractions collected during the solubilization process were analyzed by FTIR and by surface area and porosimetry. The results show that an obvious inflection point exists that allows separating the dissolution sequence into stages. Small molecules are first extracted from the free state, then molecules trapped in micropores are extracted and, finally, molecules trapped in the coal-matrix network are extracted. This is indicated from the extraction yield curves. Chain-like carbonyl compounds, -OH (or -NH) containing compounds that are hydrogen bonded and phenolics dominate the petroleum ether extracts. Chain-like carbonyl components and ether compounds (aliphatic ethers and aromatic ethers) dominate the CS2 extracts. A solvent dissolution mechanism and the effect of small molecule extraction on the pore structure are put forward. Diffusion, dissolution, pore opening, pore shrinking or even collapsing caused by swelling, creating of new micropores, pore opening and, finally, colloidallization of some micropores occurs. In the later stages of the extraction the internal structure of the coal is colloidallized due to swelling and the pore number or volume is greatly reduced.

Solvent extraction of zinc from zinc sulfate solution

The extraction of zinc from zinc sulfate solution was investigated, using 20% saponified D2EHPA as an extractam and 260^# sulfonate kerosene as a diluent. The solution was stirred for 8 min at phase ratio （Vσ/Va） of 1.0：1.0, initial pH of 2.0 and stirring speed of 200 r/min. The results show that 75% zinc can be extracted from the zinc sulfate solution when the concentration of zinc is 18.7 g/L after being settled for 10 min. 88.60% zinc can be stripped by 196 g/L sulfuric acid, and zinc ion can be separated from ferric ion.

Terminal Effect of Drop Coalescence on Single Drop Mass Transfer Measurements and Its Minimization

For the mass transfer to single drops during the stage of steady buoyancy-driven motion, experimental measurement is complicated with the terminal effect of additional mass transfer during drop formation and coalescence at the drop collector. Analysis reveals that consistent operating conditions and experimental procedure are of critical significance for minimizing the terminal effect of drop coalescence on the accuracy of mass transfer measurements. The novel design of a totally-closed extraction column is proposed for this purpose, which guarantees that the volumetric rate of drop phase injection is exactly equal to that of withdrawal of drops. Tests in two extraction systems demonstrate that the experimental repeatability is improved greatly and the terminal effect of mass transfer during drop coalescence is brought well under control.

Separation and purification of tantalum from plumbomicrolite of amazonite deposit in Kola Peninsula by acid leaching and solvent extraction

A plumbomicrolite concentrate(PMC)was leached with the mixture of HF and H2SO4,HF and HNO3 acids,respectively.Optimal conditions ensuring high recovery of tantalum and niobium(up to 99%)into solution,and radionuclides into insoluble residue were determined.Fluoride-sulfuric acid and fluoride-nitric acid schemes were proposed for PMC leaching by an extractive separation of tantalum form niobium,lead and impurities,and production of high-purity tantalum compounds.Octanol-1 was used as an extractant.Optimal conditions for production of high-purity tantalum strip solutions were defined for all stages(extraction-scrubbing-stripping).Produced tantalum compounds,such as tantalum pentoxide and potassium heptafluotanthalate,comply with the norms for high-purity substances in terms of impurities content.Final choice of the PMC processing scheme is determined by its profitability.

Preparation of PLA or PLGA Microspheres with Estradiol the Effects of THF—adding on the Properties of MS

Aim Polylactic acid (PLA) or polylactide-co-glycolide (PLGA) was used asbiodegradable and biocom-patible carriers to achieve sustained release ofestradial-PLGA/PLA-Microspheres (E_2-PLGA/PLA-MS). THF was added in the organic phase to study itseffects on the properties of MS. Methods MS were formed by an emulsification-solvent extractionmethod with mixture of ethyl acetate (EtoAc) and tetrahydrofuran (THF) as the organic solvents, andthen the properties and in vitro drug release behavior were examined. Results The results indicatedthat the drug loading efficiency decreased when THF added, but when the ratio of EtoAc was more than50% , there was no obvious effect of THF ratio, but the particle size increased accordingly. Thecarriers' properties and the drug contents were the main factors influencing the in vitro drugrelease. Conclusions By controlling the technology and formulation, we can get sustained-release E_2biodegradable microsperes with proper particle size, drug content and low burst-release, althoughTHF with readily solubility in water was used in the organic phase.

Research and development trends of hydrometallurgy:An overview based on Hydrometallurgy literature from 1975 to 2019

Modern hydrometallurgy has been developing for more than 100 years and the related articles keep piling up.Based on a bibliometric analysis of the articles in Hydrometallurgy,the most authoritative journal in the field of hydrometallurgy,we try to catch the research and development trends from a global perspective.Firstly,keywords burstness shows that rare earth,recycling,lithium,ionic liquid,and thorium are the hotspots in recent years,and the economic and technological reasons behind them were discussed in depth.Secondly,the proportion of biohydrometallurgy grows fast from 5%to 13%and the related articles are almost all about bioleaching.There are some new directions such as direct preparation of materials in hydrometallurgical processes and ion-imprinted techniques.Thirdly,the advanced instrument analysis methods such as XAFS(X-ray absorption fine structure),gene sequencing,and micro-CT promote the deep understanding of hydrometallurgy mechanism.Finally,the cooperation network and contribution of the main institutes were mapped.

从硼废水中提取硼（Ⅰ）

简要叙述了从硼废水中提取硼的意义，详细介绍了提取硼的实验方法。

Improved Production of Paclitaxel from Suspension Culture of Taxus chinensis var. mairei by in situ Extraction with Organic Solvents

The production of paclitaxel from suspension culture of Taxus chinensis var,mairei was improved by in situ extraction with organic solvents to avoid feedback repression and product degradation.Oleic acid and dibutyl phthalate were proved to be suitable solvents .The optimal volumetric percentage of organic solvents in the culture medium was found to be around 8%,and the favorable time for their introduction was at the exponential phase of cell growth,Paclitaxel production with the in situ extraction was ca 3-fold of that without extraction.