Systematical researches were accomplished on WC-Co with different Co contents(6%,10%and 12%,mass fraction).Based on the XPS and EDX,from orthogonal pretreatment experiments,it is indicated that the acid concentration,...Systematical researches were accomplished on WC-Co with different Co contents(6%,10%and 12%,mass fraction).Based on the XPS and EDX,from orthogonal pretreatment experiments,it is indicated that the acid concentration,the time of the acid pretreatment and the original Co content have significant influences on the Co-removal depth(D).Moreover,the specimen temperature,original Co content and Co-removal depth dependences of the Co evolution in nucleation,heating(in pure H2 atmosphere)and growth experiments were discussed,and mechanisms of Co evolutions were summarized,providing sufficient theoretical bases for the deposition of high-quality diamond films on WC-Co substrates,especially Co-rich WC-Co substrates.It is proven that the Co-rich substrate often presents rapid Co diffusion.The high substrate temperature can promote the Co diffusion in the pretreated substrate,while acts as a Co-etching process for the untreated substrates.It is finally found that the appropriate Co-removal depth for the WC-12%Co substrate is 8-9μm.展开更多
An attempt was made to build up a thick and compact oxide layer rapidly by pre-treating the Pb-Ag-Nd anode in fluoride-containing H2SO4 solution. The passivation reaction of Pb-Ag-Nd anode during pre-treatment process...An attempt was made to build up a thick and compact oxide layer rapidly by pre-treating the Pb-Ag-Nd anode in fluoride-containing H2SO4 solution. The passivation reaction of Pb-Ag-Nd anode during pre-treatment process was investigated using cyclic voltammetry, linear scanning voltammetry, environmental scanning electron microscopy and X-ray diffraction analysis. The results show that Pb F2 and PbSO4 are formed near the potential of Pb/PbSO4 couple. The pre-treatment in fluoride-containing H2SO4 solution contributes to the formation of a thick, compact and adherent passive film. Furthermore, pre-treatment in fluoride-containing H2SO4 solution also facilitates the formation of PbO2 on the anodic layer, and the reason could be attributed to the formation of more PbF2 and PbSO4 during the pre-treatment which tend to transform to PbO2 during the following electrowinning process. In addition, the anodic layer on anode with pre-treatment in fluoride-containing H2SO4 solution is thick and compact, and its predominant composition is β-PbO2. In summary, the pre-treatment in fluoride-containing H2SO4 solution benefits the formation of a desirable protective layer in a short time.展开更多
基金Projects(51275302,51005154)supported by the National Natural Science Foundation of ChinaProject(2015M580327)supported by the China Postdoctoral Science FoundationProject(2016T90370)supported by the China Postdoctoral Science Foundation Special Funded Project
文摘Systematical researches were accomplished on WC-Co with different Co contents(6%,10%and 12%,mass fraction).Based on the XPS and EDX,from orthogonal pretreatment experiments,it is indicated that the acid concentration,the time of the acid pretreatment and the original Co content have significant influences on the Co-removal depth(D).Moreover,the specimen temperature,original Co content and Co-removal depth dependences of the Co evolution in nucleation,heating(in pure H2 atmosphere)and growth experiments were discussed,and mechanisms of Co evolutions were summarized,providing sufficient theoretical bases for the deposition of high-quality diamond films on WC-Co substrates,especially Co-rich WC-Co substrates.It is proven that the Co-rich substrate often presents rapid Co diffusion.The high substrate temperature can promote the Co diffusion in the pretreated substrate,while acts as a Co-etching process for the untreated substrates.It is finally found that the appropriate Co-removal depth for the WC-12%Co substrate is 8-9μm.
基金Projects(51204208,51374240)supported by the National Natural Science Foundation of ChinaProject(2014zzts028)supported by the Fundamental Research Funds for the Central Universities of Central South University,China
文摘An attempt was made to build up a thick and compact oxide layer rapidly by pre-treating the Pb-Ag-Nd anode in fluoride-containing H2SO4 solution. The passivation reaction of Pb-Ag-Nd anode during pre-treatment process was investigated using cyclic voltammetry, linear scanning voltammetry, environmental scanning electron microscopy and X-ray diffraction analysis. The results show that Pb F2 and PbSO4 are formed near the potential of Pb/PbSO4 couple. The pre-treatment in fluoride-containing H2SO4 solution contributes to the formation of a thick, compact and adherent passive film. Furthermore, pre-treatment in fluoride-containing H2SO4 solution also facilitates the formation of PbO2 on the anodic layer, and the reason could be attributed to the formation of more PbF2 and PbSO4 during the pre-treatment which tend to transform to PbO2 during the following electrowinning process. In addition, the anodic layer on anode with pre-treatment in fluoride-containing H2SO4 solution is thick and compact, and its predominant composition is β-PbO2. In summary, the pre-treatment in fluoride-containing H2SO4 solution benefits the formation of a desirable protective layer in a short time.
