期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
溶胶-凝胶-燃烧法合成纳米Y2O3:Eu^3+红色荧光粉
1
作者 王仁清 《跨世纪》 2008年第12期100-100,共1页
采用甘氨酸为助燃剂用溶胶-凝胶-燃烧法合成超细Y2O3:Eu^3+红色荧光粉。
关键词 Y2O3:Eu^3+ 溶胶-凝胶-燃烧法 荧光粉
下载PDF
溶胶-凝胶-燃烧法制备MgO-Al_2O_3:Ce^(3+)、Tb^(3+)及其光谱行为的研究
2
作者 董红军 常树岚 李晓娟 《延边大学学报(自然科学版)》 CAS 2005年第4期272-275,共4页
采用溶胶凝胶燃烧法在800℃合成了掺杂Ce3+和Tb3+的MgO-Al2O3体系发光材料,比传统高温固相扩散法的合成温度降低了700~800℃.研究了MgO-Al2O3基质当中单掺杂Tb3+及共掺杂Ce3+、Tb3+的发光材料荧光光谱行为,以及恒定温度下时间与浓度对... 采用溶胶凝胶燃烧法在800℃合成了掺杂Ce3+和Tb3+的MgO-Al2O3体系发光材料,比传统高温固相扩散法的合成温度降低了700~800℃.研究了MgO-Al2O3基质当中单掺杂Tb3+及共掺杂Ce3+、Tb3+的发光材料荧光光谱行为,以及恒定温度下时间与浓度对发光材料荧光光谱行为的影响,并对其红外光谱和反应原理进行了探讨. 展开更多
关键词 溶胶-凝胶-燃烧法 稀土 荧光光谱 反应原理
下载PDF
溶胶-凝胶自蔓延燃烧法合成纳米尖晶石型AFe_2O_4 被引量:3
3
作者 薛锐 王永强 +3 位作者 臧萌 陈曦 刘敏敏 赵朝成 《功能材料》 EI CAS CSCD 北大核心 2017年第6期6134-6138,6143,共6页
通过溶胶-凝胶自蔓延燃烧法制备了系列纳米尖晶石材料AFe_2O_4(A=Cu、Co、Ni、Mg、Zn),采用DTA、XRD、FT-IR、BET、SEM、TEM、XPS等技术对样品进行了表征,着重研究不同A位元素对尖晶石材料的影响。结果表明,200℃时,AFe_2O_4干凝胶发生... 通过溶胶-凝胶自蔓延燃烧法制备了系列纳米尖晶石材料AFe_2O_4(A=Cu、Co、Ni、Mg、Zn),采用DTA、XRD、FT-IR、BET、SEM、TEM、XPS等技术对样品进行了表征,着重研究不同A位元素对尖晶石材料的影响。结果表明,200℃时,AFe_2O_4干凝胶发生自蔓延燃烧;500℃时,尖晶石结构形成,有明显的正四面体和正六面体亚晶格出现,晶格尺寸在40nm左右,均呈纳米结构;其中CuFe_2O_4为反式尖晶石结构,Fe、Cu、O所占比例分别为42%,39%,19%。BET、TEM及SEM结果发现该方法制备的尖晶石材料呈明显的片状介孔结构,比表面积在20m^2/g左右,层状结构之间距离15nm。A位上元素不同,制备过程中自蔓延温度不同,孔结构和微观结构有较大差异。 展开更多
关键词 尖晶石 溶胶--自蔓延燃烧 纳米材料 铁酸盐
下载PDF
Sol-gel auto-combustion synthesis of K_xNa_(1-x)NbO_3 nanopowders and ceramics: Dielectric and piezoelectric properties 被引量:1
4
作者 Hua-lei CHENG Jian XIAO +3 位作者 Peng GAO Yun-yun YAN Shuan-ping GAO Hong-liang DU 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2018年第9期1801-1807,共7页
The KxNa1-xNbO3 nanopowders with cubic-like morphology and an average size of about 50 nm were synthesized by sol-gel auto-combustion method.And then,the ceramics were prepared and the phase transition,microstructure ... The KxNa1-xNbO3 nanopowders with cubic-like morphology and an average size of about 50 nm were synthesized by sol-gel auto-combustion method.And then,the ceramics were prepared and the phase transition,microstructure and electrical properties of the KxNa1-xNbO3 ceramics were investigated.Pure perovskite phases of the KxNa1-xNbO3 ceramics were confirmed by XRD patterns and the K0.50Na0.50NbO3 ceramics show the coexistence of orthorhombic and monoclinic structures.SEM micrographs show that all samples have bimodal grain size distributions and the number of the small grains decrease with increasing K+content in the bimodal grain size distribution system.The K0.50Na0.50NbO3 ceramics with the uniform grain size and the maximum density show excellent electrical properties withεr=467.40,tanδ=0.020,d33=128 pC/N and kp=0.32 at the room temperature,demonstrating that the properties of the K0.50Na0.50NbO3 powers prepared by sol-gel auto-combustion are excellent and the ceramics are promising lead-free piezoelectric materials. 展开更多
关键词 sol-gel auto-combustion KxNa1-xNbO3 phase transition MICROSTRUCTURE electrical properties
下载PDF
Preparation and Application of the Sol–Gel Combustion Synthesis-Made CaO/CaZrO_3 Sorbent for Cyclic CO_2 Capture Through the Severe Calcination Condition 被引量:5
5
作者 王保文 宋小勇 +1 位作者 王宗华 郑楚光 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第9期991-999,共9页
Calcium looping method has been considered as one of the efficient options to capture C02 in the combustion Ilue gas. CaO-based sorbent is the basis for application of calcium looping and should be subjected to the se... Calcium looping method has been considered as one of the efficient options to capture C02 in the combustion Ilue gas. CaO-based sorbent is the basis for application of calcium looping and should be subjected to the severe calcination condition so as to obtain the concentrated C02 stream. In this research, CaO/CaZrO3 sorbents were synthesized using the sol-gel combustion synthesis (SGCS) method with urea as fuel. The cyclic reaction performance of the synthesized sorbents was evaluated on a lab-scaled reactor system through calcination at 950 ℃ in a pure C02 atmosphere and carbonation at 650 ℃ in the 15% (by volume) C02. The mass ratio of CaO to CaZr03 as 8:2 (designated as CasZr2) was screened as the best option among all the synthesized CaO sorbents for its high CO2 capture capacity and carbonation conversion at the initial cycle. And then a gradual decay in the C02 capture capacity was observed at the following 10 successive cycles, but hereafter stabilized throughout the later cycles. Furthermore, structural evolution of the carbonated CasZr2 over the looping cycles was investigated. With increasing looping cycles, the pore peak and mean grain size of the carbonated CasZr2 sorbent shifted to the bigger direction but both the surface area (SA) ratio and surface fractal dimension Ds decreased. Finally, morphological transformation of the carbonated CasZr2 was observed. Agglomeration and edge rounding of the newly formed CaC03 grains were found as aggravated at the cyclic carbonation stage. As a result, carbonation of CasZr2 with C02 was observed only confined to the external active CaO by the fast formation of the CaC03 shell outside, which occluded the further carbonation of the unreacted CaO inside. Therefore, enough attention should be paid to the carbonation stage and more effective activation measures should be explored to ensure the unreacted active CaO fully carbonatPd river the extended Ioonin cycles. 展开更多
关键词 C02 captureCalcium looping cyclesCaO/CaZr03 sorbentSol-gel combustion synthesis method
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部