Fractionation of heavy metals in sediments can help in understanding potential hazards of heavy metals. The present study analyzed total concentrations and fractions of selected heavy metals （Cd, Cr, Cu, Pb, and Zn）...Fractionation of heavy metals in sediments can help in understanding potential hazards of heavy metals. The present study analyzed total concentrations and fractions of selected heavy metals （Cd, Cr, Cu, Pb, and Zn） in surface sediments from Dianchi Lake, Yunnan Province, China, as well as factors that may affect distributions of the various heavy metal fractions. Total concentrations of the heavy metals decreased in the order Zn 〉 Cu 〉 Pb 〉 Cr 〉 Cd. These heavy metals, except Cr, were much higher than their background levels, indicating that Dianchi Lake was polluted by Cd, Zn, Pb, and Cu. Cadmium occurred mainly as the non-residual fraction （sum of the HOAc-soluble, reducible, and oxidizable fractions） （97.6%）, and Zn （55.7%） was also predominantly found in the non-residual fraction. In contrast, most of the Cr （88.5%）, Pb （81.8%）, and Cu （59.2%） occurred in the residual fraction. Correlation analysis showed that total heavy metal concentrations, organic matter and reducible Fe were the main factors affecting the distributions of the various heavy metal fractions. In the Walhai section of Dianchi Lake （comprising 97% of the lake area）, the concentrations of Cd, Zn, Pb, and Cu in the non-residual fraction were significantly lower （P ≤ 0.01 or 0.05） than those of the Caohal section （3% of the lake area）. This indicated that potential heavy metal hazards in the Caohai section were greater than the Waihai section.展开更多
For the past 20 years, numerous studies have been carried out on the application of equilibrium partitioning approach （EqPA） for the derivation of sediment quality guidelines （SQGs）. However, for metals, few Equil...For the past 20 years, numerous studies have been carried out on the application of equilibrium partitioning approach （EqPA） for the derivation of sediment quality guidelines （SQGs）. However, for metals, few Equilibrium-partitioning- based numerical SQGs have been developed or are currently available because of the confounding factors mediating the bioavailability of metals. A study was conducted at Dianchi Lake, which is a heavily eutrophicated lake on the Yunnan- Guizhou Plateau, China with the focus on the measurement of partitioning coefficient （Kp） and SQGs derivation and normalization to acid volatile sulfide （AVS）, fine material, and organic carbon. Using new normalization methods, SQGs were formulated for seven metals including copper, zinc, lead, cadmium, chromium, mercury, and arsenic in Dianchi Lake. In Dianchi Lake sediments, the fine material contributed 25.4%-36.0% to the SQG values, with the largest contribution to the SQG value of mercury; AVS contributed 2.9%-75.0% to the SQG values, with the largest contribution to the SQG value of cadmium. This indicated that the fine material and the AVS were the most important controlling factors to the bioavailability of mercury and caximium, respectively. The contribution of total organic carbon （TOC） to the SQG values of copper and leaxi was 3.8% and 7.1%, respectively, indicating that at relatively lower concentrations, the contribution of TOC was not significant. In addition to normalization methods, appropriate procedures for the application of EqPA including sample collection, storage, and analysis are also essential to improve the reliability of SQGs. The normalized Dianchi Lake SQGs were higher than most of the empirically based SQGs developed in North America, but lower than Hong Kong interim SQGs except for cadmium and arsenic. The differences could be attributed to the approaches used for derivation of SQGs and the water quality criteria adopted and the differences in the physical and chemical characteristics of the sediments.展开更多
The sediment redox potential was raised in the laboratory to estimate reduction of internal available phosphorus loads,such as soluble reactive phosphorus(SRP)and total phosphorus(TP),as well as the main elements of s...The sediment redox potential was raised in the laboratory to estimate reduction of internal available phosphorus loads,such as soluble reactive phosphorus(SRP)and total phosphorus(TP),as well as the main elements of sediment extracts in Dianchi Lake.Several strongly reducing substances in sediments,which mainly originated from anaerobic decomposition of primary producer residues,were responsible for the lower redox potential.In a range of -400 to 200 mV raising the redox potential of sediments decreased TP and SRP in interstitial water.Redox potentials exceeding 320 mV caused increases in TP,whereas SRP maintained a relatively constant minimum level.The concentrations of Al,Fe, Ca^(2+),Mg^(2+),K^+,Na^+ and S in interstitial water were also related to the redox potential of sediments,suggesting that the mechanism for redox potential to regulate the concentration of phosphorus in interstitial water was complex.展开更多
基金Project supported by the Science and Technology Program for Social Development of Jiangsu Province,China (No.BS2006060)Startup Fund of Nanjing University of Information Science & Technology, the State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University (No. 2005406711)the Jiangsu Key Laboratory of Environmental Change and Ecological Construction, Nanjing Normal University.
文摘Fractionation of heavy metals in sediments can help in understanding potential hazards of heavy metals. The present study analyzed total concentrations and fractions of selected heavy metals （Cd, Cr, Cu, Pb, and Zn） in surface sediments from Dianchi Lake, Yunnan Province, China, as well as factors that may affect distributions of the various heavy metal fractions. Total concentrations of the heavy metals decreased in the order Zn 〉 Cu 〉 Pb 〉 Cr 〉 Cd. These heavy metals, except Cr, were much higher than their background levels, indicating that Dianchi Lake was polluted by Cd, Zn, Pb, and Cu. Cadmium occurred mainly as the non-residual fraction （sum of the HOAc-soluble, reducible, and oxidizable fractions） （97.6%）, and Zn （55.7%） was also predominantly found in the non-residual fraction. In contrast, most of the Cr （88.5%）, Pb （81.8%）, and Cu （59.2%） occurred in the residual fraction. Correlation analysis showed that total heavy metal concentrations, organic matter and reducible Fe were the main factors affecting the distributions of the various heavy metal fractions. In the Walhai section of Dianchi Lake （comprising 97% of the lake area）, the concentrations of Cd, Zn, Pb, and Cu in the non-residual fraction were significantly lower （P ≤ 0.01 or 0.05） than those of the Caohal section （3% of the lake area）. This indicated that potential heavy metal hazards in the Caohai section were greater than the Waihai section.
基金Project supported by the State Key Laboratory of Soil and Sustainable Agriculture, China (No. 5022505)the National Natural Science Foundation of China (No. 40771128)
文摘For the past 20 years, numerous studies have been carried out on the application of equilibrium partitioning approach （EqPA） for the derivation of sediment quality guidelines （SQGs）. However, for metals, few Equilibrium-partitioning- based numerical SQGs have been developed or are currently available because of the confounding factors mediating the bioavailability of metals. A study was conducted at Dianchi Lake, which is a heavily eutrophicated lake on the Yunnan- Guizhou Plateau, China with the focus on the measurement of partitioning coefficient （Kp） and SQGs derivation and normalization to acid volatile sulfide （AVS）, fine material, and organic carbon. Using new normalization methods, SQGs were formulated for seven metals including copper, zinc, lead, cadmium, chromium, mercury, and arsenic in Dianchi Lake. In Dianchi Lake sediments, the fine material contributed 25.4%-36.0% to the SQG values, with the largest contribution to the SQG value of mercury; AVS contributed 2.9%-75.0% to the SQG values, with the largest contribution to the SQG value of cadmium. This indicated that the fine material and the AVS were the most important controlling factors to the bioavailability of mercury and caximium, respectively. The contribution of total organic carbon （TOC） to the SQG values of copper and leaxi was 3.8% and 7.1%, respectively, indicating that at relatively lower concentrations, the contribution of TOC was not significant. In addition to normalization methods, appropriate procedures for the application of EqPA including sample collection, storage, and analysis are also essential to improve the reliability of SQGs. The normalized Dianchi Lake SQGs were higher than most of the empirically based SQGs developed in North America, but lower than Hong Kong interim SQGs except for cadmium and arsenic. The differences could be attributed to the approaches used for derivation of SQGs and the water quality criteria adopted and the differences in the physical and chemical characteristics of the sediments.
基金Project supported by the National Natural Science Foundation of China(No.40401029).
文摘The sediment redox potential was raised in the laboratory to estimate reduction of internal available phosphorus loads,such as soluble reactive phosphorus(SRP)and total phosphorus(TP),as well as the main elements of sediment extracts in Dianchi Lake.Several strongly reducing substances in sediments,which mainly originated from anaerobic decomposition of primary producer residues,were responsible for the lower redox potential.In a range of -400 to 200 mV raising the redox potential of sediments decreased TP and SRP in interstitial water.Redox potentials exceeding 320 mV caused increases in TP,whereas SRP maintained a relatively constant minimum level.The concentrations of Al,Fe, Ca^(2+),Mg^(2+),K^+,Na^+ and S in interstitial water were also related to the redox potential of sediments,suggesting that the mechanism for redox potential to regulate the concentration of phosphorus in interstitial water was complex.
