By analyzing and interpreting the newly acquired seismic profile supported by the national 973 Program and synthesizing the data with other geologic ＆ geographic information, we draw conclusions as follows, a） Two s...By analyzing and interpreting the newly acquired seismic profile supported by the national 973 Program and synthesizing the data with other geologic ＆ geographic information, we draw conclusions as follows, a） Two seismic reflections located at the northeast South China Sea （SCS） slope and the Hengchun ridge are the Bottom Simulated Reflections （BSRs）. Yet, the genesis and process of the gas hydrate in these two areas are different because of different regional tectonics and geological environments; b） The genesis of gas hydrate located at the northeast SCS slope area is related to the broadly existing fracture zones, slumping tectosomes, and the distinctive shielding environment of pressure masking field formed by them. But the genesis of the gas hydrate at the Hengchun ridge is associated with the thrust nappe structures and accretionary wedges formed along the Manila subduction zone and the related sub-floor fluid channel system built by them; c） Since the analogous geologic bodies are broadly distributed at slope areas around SCS and the temperature-press environment is very suitable to the formation and conservation of the gas hydrate, we suggest that much more of this resource should be stored in these areas.展开更多
A grey smoothing model for predicting mine gas emission was presented by combining the grey system theory with the smoothing prediction technique. First of all, according to the variable sequence, GM(1,1) model was se...A grey smoothing model for predicting mine gas emission was presented by combining the grey system theory with the smoothing prediction technique. First of all, according to the variable sequence, GM(1,1) model was set up to predict the general development trend of variable as first fitted values, then the smoothing prediction technique was used to revise the fitted values so as to improve the accuracy of prediction. The results of application in the No.6 Coal Mine in Pingdingshan mining area show that the grey smoothing model has higher accuracy than that of GM(1,1) in predicting the variable sequence with strong fluctuation. The research provides a new scientific method for predicting mine gas emission.展开更多
In view of an entire dynamic model of tilting-pad journal bearing(TPJB) in which the pads swing and vibrate along geometric direction of preload, a TPJB of elastic and damped pivots was designed and manufactured. Vibr...In view of an entire dynamic model of tilting-pad journal bearing(TPJB) in which the pads swing and vibrate along geometric direction of preload, a TPJB of elastic and damped pivots was designed and manufactured. Vibration experiments were carried out under the conditions of different rotor bending stiffness and oil supply pressure to find out the relationship between the new bearing's vibration depression effect and other dynamic parameters of the rotor. The result shows that critical amplitudes can be efficaciously reduced while system's stability can be remarkably improved by this bearing. Besides, the bearing's effect of vibration depression weakens as the rotor bending stiffness increases, but heightens it as the oil supply pressure increases.展开更多
A new dual-fluid model considering phase ansition and velocity slip was proposed in this paper and the Cunningham correction was used in the droplet resistance calculation. This dual-fluid model was applied to the num...A new dual-fluid model considering phase ansition and velocity slip was proposed in this paper and the Cunningham correction was used in the droplet resistance calculation. This dual-fluid model was applied to the numerical simulations of wet steam flow in a 2D LAVAL nozzle and in the White cascade respectively. The results of two simulations demonstrate that the model is reliable. Meanwhile, the spontaneous condensing flow in White cascade was analyzed and it infers that the irreversible loss caused by condensation accounts for the largest share （about 8.78% of inlet total pressure） in total pressure loss while the loss caused by velocity slip takes the smallest share （nearly 0.42%）, and another part of total pressure loss caused by pneumatic factors contributes a less share than condensation, i.e. almost 3.95% of inlet total pressure.展开更多
文摘By analyzing and interpreting the newly acquired seismic profile supported by the national 973 Program and synthesizing the data with other geologic ＆ geographic information, we draw conclusions as follows, a） Two seismic reflections located at the northeast South China Sea （SCS） slope and the Hengchun ridge are the Bottom Simulated Reflections （BSRs）. Yet, the genesis and process of the gas hydrate in these two areas are different because of different regional tectonics and geological environments; b） The genesis of gas hydrate located at the northeast SCS slope area is related to the broadly existing fracture zones, slumping tectosomes, and the distinctive shielding environment of pressure masking field formed by them. But the genesis of the gas hydrate at the Hengchun ridge is associated with the thrust nappe structures and accretionary wedges formed along the Manila subduction zone and the related sub-floor fluid channel system built by them; c） Since the analogous geologic bodies are broadly distributed at slope areas around SCS and the temperature-press environment is very suitable to the formation and conservation of the gas hydrate, we suggest that much more of this resource should be stored in these areas.
基金National Natural Science Foundation of China (No.40 172 0 5 9)
文摘A grey smoothing model for predicting mine gas emission was presented by combining the grey system theory with the smoothing prediction technique. First of all, according to the variable sequence, GM(1,1) model was set up to predict the general development trend of variable as first fitted values, then the smoothing prediction technique was used to revise the fitted values so as to improve the accuracy of prediction. The results of application in the No.6 Coal Mine in Pingdingshan mining area show that the grey smoothing model has higher accuracy than that of GM(1,1) in predicting the variable sequence with strong fluctuation. The research provides a new scientific method for predicting mine gas emission.
基金Project(2012CB026000)supported by the National Basic Research Program of China(973 Program)
文摘In view of an entire dynamic model of tilting-pad journal bearing(TPJB) in which the pads swing and vibrate along geometric direction of preload, a TPJB of elastic and damped pivots was designed and manufactured. Vibration experiments were carried out under the conditions of different rotor bending stiffness and oil supply pressure to find out the relationship between the new bearing's vibration depression effect and other dynamic parameters of the rotor. The result shows that critical amplitudes can be efficaciously reduced while system's stability can be remarkably improved by this bearing. Besides, the bearing's effect of vibration depression weakens as the rotor bending stiffness increases, but heightens it as the oil supply pressure increases.
基金support for this work by the fundamental research funds for the Cen-tral Universities (Grant No. HIT. NSRIF. 201173)
文摘A new dual-fluid model considering phase ansition and velocity slip was proposed in this paper and the Cunningham correction was used in the droplet resistance calculation. This dual-fluid model was applied to the numerical simulations of wet steam flow in a 2D LAVAL nozzle and in the White cascade respectively. The results of two simulations demonstrate that the model is reliable. Meanwhile, the spontaneous condensing flow in White cascade was analyzed and it infers that the irreversible loss caused by condensation accounts for the largest share （about 8.78% of inlet total pressure） in total pressure loss while the loss caused by velocity slip takes the smallest share （nearly 0.42%）, and another part of total pressure loss caused by pneumatic factors contributes a less share than condensation, i.e. almost 3.95% of inlet total pressure.
