Characterization and processing of talc-magnesite from the Zinelbulak deposit

The characteristics of talc-magnesite from the Zinelbulak deposit(Uzbekistan) were investigated via X-ray diffraction, differential thermal analysis,infrared spectroscopy and optical microscopy.The mineralogical composition of the Zinelbulak talc-magnesite consists of 52 wt.%talc,43 wt.%carbonates and 5 wt.%of the iron-containing minerals magnetite,siderite and chlorite.Petrographic analysis confirmed the presence of carbonates in two forms:magnesite and breunnerite.Grindability tests revealed that talc and magnesite particles are completely separated after a grinding process carried out for 10～12 min.The distribution of the yield of talc and magnesite,as a function of the particle size,shows an irregular feature in that a comparatively coarser sample(>0.1 mm) is richer in magnesite and poor in talc while a comparatively finer sample(<0.1 mm) has a composition poorer in magnesite.The dressability of the Zinelbulak talc-magnesite was tested using conventional gravity concentration,flotation and electromagnetic separation.Gravity concentration was found to be the most economic initial process for the complete separation of magnesium carbonate and talc.Subsequent flotation and magnetic separation techniques could further increase the yield of high quality magnesite and talc.Refractory samples prepared by heating the separated magnesite at 1600℃for 2 h met the State Standards for refractory materials.

The relation between modes of lithologic association and interlayer-gliding structures in coal mine

As a case study of the Panji No.1 Coal Mine in Anhui Province, based on thesite measured and statistical data, summarized the lithologic associations, characteristicsand distribution laws of interlayer-gliding structures and tectonic coal in the No.11-2 coalseams.The results show that 9 modes of lithologic association can form interlayer-glidingstructures.It is more easy for rock slip to occur when the lithologic associations are mainroof + coal seam + immediate floor type, compound roof+immediate roof + coal seam +immediate floor type and immediate roof + coal seam + immediate floor type.Lithologicassociations of roof and floor are the precondition to the formation of interlayer-glidingstructures.

Magnesite and talc origin in the sequence of geodynamic events in Veporicum, Inner Western Carpathians, Slovakia

This paper summarizes recent data about magnesite and talc genesis in Carboniferous host rocks of Western Carpathians (Slovakia) , which occur in two distinct belts in tectonic superunit Veporicum and its contact zone with Gemericum. The northern Sinec magnesite and talc belt (with main deposits Kokava, Sinec, Samo, Hnust'a-Mutnik) contains economic accummulation of magnesite and talc, while in the southern Ochtina belt ( main deposits in Dubrava massif-Dubrava, Mikova, Jedl'ovec; Lubenik, Ochtina, Kosice-Bankov, Banisko, Medvedia) the magnesite is dominating.The magnesite genesis by successive replacement of Carboniferous calcite to dolomite and magnesite during metamorphic process Ml (northern belt 280-400℃; , southern belt 370-420℃: ; Radvanec & Prochaska, 2001; Kodera & Radvanec, 2002) , being supplied by Mg from Permoscythian evaporitic bittern brines, relates to Variscan post-collisional (post-VD) evolution. The extensional tectonics and the high heat flow facilitated the generation of a hydrothermal system.The time-separated later metamorphic and sourcely different fluid flow event (M2; 1. c. ) produced talc. Tectonic, microtectonic, metamorphic and geochronological data relate the talc origin with the Alpine Upper Cretaceous (88-84 Ma; Maluski in Kovacik et al. , 1996) tectonothermal event AD2. This event, being the consequence of Alpine collisional ( AD1 ) crustal thickening and metamorphic core complex origin, meant regional extension and pervasive fluid flow of open system in crustal discontinuities. This process was prominent in the northern belt ( Sinec shear zone) located more closely to Veporic thermal dome, while towards its peripheral parts (southern Ochtina belt) the M2 metamorphic process and steatitization gradually weakened.Studies from Sinec shear zone (being the prominent AD2 -AD3 structure of northern Sinec belt) , where the dolomite/magnesite lenses (replacement in M1) and their accompanying lithology were in AD1 sandwitched between more competent basement blocks, proved in AD2 the pervasite steatitization, the talc and dolomite 2 origin in extensional microstructures ( metamorphic process M2; 490 -540℃, 240-330 MPa, 1. c. ).The economic accummulations of talc in Sinec belt are the products of antithetic shearing during the AD3 phase, being the gradual continuation of AD2 ( change of kinematics from unroofing to regional transpressional shearing). Contrary to the northern Sinec belt having located the AD3 deformation into narrow shear zone with soft lithology surrounded by hard lithology, in southern Ochtina belt the deformation AD3 was accommodated by wide soft rock column with rigid carbonate blocks floating inside. The lower P-T ( M2)conditions and deformational gradient in Ochtina belt during AD2 and AD3 phases caused why no economic talc accummulations developed there.The results of presented study can be used as general criteria for magnesite and talc prospection in Alpine type terranes.

Influence of rutile(TiO_2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy

The effect of rutile（TiO_2） content on the wear and microhardness properties of aluminium（Al）-based hybrid composites was explored. The proposed content of TiO_2（0, 4%, 8%, 12%, mass fraction） was blended to Al-15% SiC composites through powder metallurgy（P/M） process. Wear test was conducted using pin-on-disc apparatus under dry sliding conditions. Fabricated preforms were characterized using X-ray diffractometer（XRD）, scanning electron microscope（SEM） and energy-dispersive X-ray spectrometer（EDS）. Optical micrographs of the composite preforms display uniform distribution of TiO_2 throughout the matrix. Quantitative results indicate that wear resistance and microhardness increase with the increase of TiO_2 content. SEM images unveil that high wear resistance is attributed to high dislocation density of deformed planes and high hardness of TiO_2. SEM images of wear debris display gradual reduction in mean size of debris when TiO_2 content increases. EDS spectra confirm the presence of oxide layer which obviously reduces the effective area of contact between the sliding surfaces thereby lowers the wear loss of composites. The observation concludes that delamination and adhesive wear are the predominant mechanisms.

Application of remote monitoring technology in landslides in the Luoshan mining area

With the scale extending of mining, the landslide disaster in the earth’s surface will become more and more serious, and these landslide disasters are being threatened to the sustainable safe mining of the underground mine and the open-pit mine. Based on the theory that sliding force is greater than the shear resistance (resisting force) at the potential slip surface is the necessary and sufficient condition to occur the landslide as the sliding criterion, the principle and method for sliding force remote monitoring is presented, and the functional relationship between the human mechanical quantity and the natural sliding force is derived, hereby, the natural sliding force can be calculated according to the human mechanical quantity. Based on above principle and method, a new system of landslide remote monitoring is designed and 53 systems are installed on the landslide body in the Luoshan mining area, which make up the landslide remote monitoring network. According to the results of field test around 8 months, monitoring curves between sliding force and time are obtained, which can describe and forecast the develop trend of landslide. According to above analysis, the results show that this system has some following advantages: (1) real-time monitoring; (2) remote intelligent transmission; (3) landslides early warning.

Chatter free sliding mode control of a chaotic coal mine power grid with small energy inputs

An augmented proportional-integral sliding surface was designed for a sliding mode controller. A chatter free sliding mode control strategy for a chaotic coal mine power grid was developed. The stability of the control strategy was proven by Lyapunov stability theorem. The proposed sliding mode control strategy eliminated the chattering phenomenon by replacing the sign function with a saturation function, and by replacing the constant coefficients in the reaching law with adaptive ones. An immune genetic algorithm was used to optimize the parameters in the improved reaching law. The cut-in time of the controllers was optimized to reduce the peak energy of their output. Simulations showed that the proposed sliding mode controller has good, chatter flee performance.

SWFP-Miner： an efficient algorithm for mining weighted frequent pattern over data streams

Previous weighted frequent pattern （WFP） mining algorithms are not suitable for data streams for they need multiple database scans. In this paper, we present an efficient algorithm SWFP-Miner to mine weighted frequent pattern over data streams. SWFP-Miner is based on sliding window and can discover important frequent pattern from the recent data. A new refined weight definition is proposed to keep the downward closure property, and two pruning strategies are presented to prune the weighted infrequent pattern. Experimental studies are performed to evaluate the effectiveness and efficiency of SWFP-Miner.

SUPPORTING PROCEDURE AND FIELD MEASUREMENT IN THE SHAFT THROUGH GLIDING TECTONIC GROUN

The paper describes mechacal properties and deformation features of shaft adjoining rocks in gliding tectonic ground and presents the shaft-supporting procedure of smooth-wall cushion blasting,preliminary bolting and shotcreting and pouring reioforced coocrete liner in one-time-whole-section on the basis of adjoining rock deformations measured dynamically site. Field measurements of the pressur exerted on shaft wall show that this supponing procedare has enough safety reserve to meet the safety requirements in mining production.

Alterations of the Nitrogen Mineralization Rates in Soils of Forest Community Depending on the Ski Run Construction (Mount Uludag,Bursa,Turkey)

Since 194os, Mount Uludag （Bithynian Olympus） has been considered famous with winter sports center in Turkey. In addition, it is one of the rare places because of its plant diversity and is also one of the important plant areas of Turkey. The ski run constructions are rapidly increased in the past decades in the alpine and subalpine belts of the mountain. Rate of nitrogen mineralization and some properties of soft were investigated in the soils of the three ski runs and undisturbed neighborhood forest sites. These ski runs are at the upper part of the forest belt in the mountain. Abies bornmuelleriana forest community is the postclimax and very sensitive to destruetion. The rates of the nitrogen mineralization in the soils were determined in controlled conditions （60% water-holding capacity, 20℃）. Nitrification and nitrogen mineralization were in the ski run inside where the natural recovery started, increased compared with the outside of the ski runs. Waterholding capacity, organic carbon, and total nitrogen were decreased in the massive damaged ski run, and due to these changes, the rates of mineralization and nitrification were also decreased.

Stability and remote real-time monitoring of the slope slide body in the Luoshan mining area

Landslides have occurred frequently in the Luoshan mining area because of disordered mining.This paper discusses the landforms and physiognomy,hydro-meteorology,formation lithology,and geologic structure of the Luoshan mining area.It also describes the factors influencing the slope stability of landslide No.Ⅲ,determines the general parameters and typical section plane,analyzes the stress-strain state of the No.Ⅲ slope,and calculates its safety factors with FLAC3 D under saturated and natural conditions.Based on a stability analysis,a remote real-time monitoring system was applied to the No.Ⅲ slope,and these monitoring data were collected and analyzed.

Study on high and steep slope stability of surface mine based on RFPA-SRM

The instability and failure mechanism of high and steep slopes in surface mines, and the basis for some reasonable landslide prevention measures were provided using the RFPA-SRM. Based on the actual progress of the Pingzhuang Western Surface Mine and based on strength reduction method, the dynamic instability processes of the top high and steep slope was simulated. Also, the landslide mode was determined, the characteristics of the displacement distribution, the deformation, failure, and the stress distribution in the slope were demonstrated, and the stability was calculated. Conclusions can be drawn as follows： the landslide or failure of high and steep slopes on a surface mine is a gradual process, in which the slope undergoes the generation, expansion, and connection of the fractures and the displacement increases until landslide occurs; a small portion of the upper rocks fail due to the tension and the lower rocks fail due to the shear; the potential sliding surface is combined and the essential cause of the landslide is the shear stress concentration.

Nonlinear dynamic fractional sliding mode control to the motor of mining locomotive

The harsh operating environment and complex operating conditions of the mine electric locomotive affect the control performance of the locomotive traction motor.In order to improve the speed control performance of electric locomotive traction motors,a dynamic fractional-order sliding mode control(DFOSMC)algorithm considering uncertain factors was proposed.A load torque sliding mode observer was designed for the complex load disturbance of the traction motor,and its observations were integrated into the DFOSMC controller to overcome the influence of load disturbance.Finally,the stability of the designed controller was proved by Lyapunov's theorem.Besides,the control performance of DFOSMC controller was compared with integer-order sliding mode controller and fractional-order sliding mode controller through simulation experiments.Compared with integer-order sliding mode and fractional-order sliding mode controllers,the dynamic and static performance of the DFOSMC controller with load observation is better,and it has stronger anti-interference ability.The DFOSMC controller effectively improves the control performance of the traction motor of the mining locomotive.

Effect of Oleic Acid Tris-(2-hydroxyethyl) isocyanurate Phosphate Ester on Biodegradability and Tribological Performance of Mineral Lubricating Oil

The oil solubility of synthetic oleic acid tris-(2-hydroxyethyl) isocyanurate phosphate ester(abbreviated as OHTP hereinafter) and its influence on the biodegradability and tribological performance of 400 SN mineral oil were investigated on a tester and a four-ball tribotester,respectively,for fast evaluating the biodegradability of lubricants.Furthermore,the morphologies and tribochemical species of the worn surfaces lubricated by OHTP-doped oil were studied by scanning electron microscope(SEM) and X-ray photoelectron spectroscope(XPS).The results indicated that OHTP possessed good oil solubility and could improve obviously the biodegradability,the extreme pressure properties,the anti-wear properties and friction-reducing properties of the 400 SN mineral oil.The analytical results of XPS spectra showed that the composite boundary lubrication films were mainly composed of absorbed films and tribochemical species such as FePO-4,Fe_3(PO_4)_2,Fe_2O_3 and Fe_3O_4,which contributed to improving the tribological performances.

Space-confined growth of high-quality CsBi3I10 lead-free perovskite film for near-infrared photodetectors with high sensitivity and stability

As a lead-free perovskite,CsBi3I10 has attracted significant attention because of its high thermal tolerance and long electron diffusion length.Solution-processed high-performance CsBi3I10 perovskite devices,however,are hindered by the formation of a two-dimensional structure,which results in an extremely high surface roughness and many pinholes.In this paper,we reported a space-confined growth(SCG)method using a single-layer polystyrene(PS)sphere template to obtain high-smoothness,high-crystallinity,and dense CsBi3I10 perovskite films.Compared with traditionally spin-coated CsBi3I10 photodetectors(PDs),the metal-semiconductor-metal PDs made by SCG showed a higher photocurrent,a lower dark current,and a bigger on/off ratio.In addition,the photocurrent of our unencapsulated CsBi3I10 perovskite PDs was not attenuated under long-time illumination.In addition,when the device was stored in air for 30 d,its performance also showed no degradation,demonstrating ultra-high stability.Furthermore,the synthesis was free of antisolvents,such as chlorobenzene and toluene,which is beneficial for the environmentally friendly assembly of the devices.Our strategy opens up a new way to prepare high-quality lead-free perovskite,which may be useful for applications in light-emitting diodes and solar cells.

Tribological and economic evaluation of recycled mineral lubricating oils

Seven kinds of used mineral lubricating oils,including hydraulic oils,film bearing oils,steam turbine oil and gear oils,were recycled by reclamation and adding additives.Physical and chemical properties of the recycled oils were measured and their lubrication performances were evaluated by the original and modified four-ball testers.Worn surfaces were analyzed by energy dispersive X-ray spectroscopy and Raman microscope.The recycling costs of burning,re-refined and refortified were estimated.Results showed that physical and chemical properties of the refortified oils were improved effectively and became in the industrial access standard.With the different friction materials under different loads,refortified oils provided excellent lubrication performances,much better than those of fresh oils.Because of additives replenished,the different lubrication films could form on the worn surfaces.A rough financial calculation revealed that the refortification process could produce the most economic value among the three methods.