期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
A dosimetric evaluation of flattening filter-free volumetric modulated arc therapy for postoperative treatment of cervical cancer 被引量:1
1
作者 Fuli Zhang Huayong Jiang +10 位作者 Weidong Xu Yadi Wang Junmao Gao Qingzhi Liu Ping Wang Na Lu Diandian Chen Bo Yao Jun Hou Heliang He Jianping Chen 《Oncology and Translational Medicine》 2016年第4期179-184,共6页
Objective The aim of the study was to compare flattening filter-free(FFF) beams and conventional flattening filter(FF) beams in volumetric modulated arc therapy(VMAT) for cervical cancer after surgery, through a retro... Objective The aim of the study was to compare flattening filter-free(FFF) beams and conventional flattening filter(FF) beams in volumetric modulated arc therapy(VMAT) for cervical cancer after surgery, through a retrospective planning study.Methods VMAT plans of FFF beams and normal FF beams were designed for a cohort of 15 patients. The prescribed dose was 45 Gy to 1.8 Gy per fraction, and at least 95% of the planning target volume received this dose. Doses were computed with a commercially available treatment planning system using a Monte Carlo(MC) algorithm. Plans were compared according to dose-volume histogram analysis in terms of planning target volume homogeneity and conformity indices(HI and CI), as well as organs at risk(OAR) dose and volume parameters. Results FFF-VMAT was similar to FF-VMAT in terms of CI, but inferior to FF-VMAT considering HI. No statistically differences were observed between FFF-VMAT and FF-VMAT in following organ at risks including pelvic bone marrow, small bowel, bladder, rectum, and normal tissue(NT)..Conclusion For patients with cervical cancer after hysterectomy, the FFF beam achieved target and OAR dose distribution similar to that of the FF beam. Reduction of beam-on time in cervical cancer is beneficial. 展开更多
关键词 flattening filter-free(FFF) cervical cancer dosimetry volumetric modulated arc therapy(VMAT)
下载PDF
采用石灰、明矾进行含油污泥调质对比研究 被引量:4
2
作者 郑凯 仇凯 《国外油田工程》 2008年第11期50-52,共3页
在化学调质促进污泥脱水的过程中,调质剂的选择主要依据含油污泥的特性以及脱水设施的类型而定。石灰、明矾、氯化铁以及聚合电解质通常作为化学调质剂使用。从污水处理厂取得的厌氧细菌消化污泥,含油量在1.8%~8%不等,通过室内... 在化学调质促进污泥脱水的过程中,调质剂的选择主要依据含油污泥的特性以及脱水设施的类型而定。石灰、明矾、氯化铁以及聚合电解质通常作为化学调质剂使用。从污水处理厂取得的厌氧细菌消化污泥,含油量在1.8%~8%不等,通过室内实验确定污泥的特性阻力、毛细吸入时间(CST)、滤后量。根据污泥含油量的不同,将石灰和明矾分别作为特殊的调质剂,添加剂量从质量分数2%~12%不等,以确定最佳化学药剂量。石灰添加量在6%时产生最佳脱水效果,而添加明矾药剂量趋于4%时,含油污泥的特性阻力、吸水能力迅速降低。明矾添加量超过4%仅增加含油污泥泥饼固体含量,被束缚污泥的总量有相应增加。建立特性阻力与CST间关联模型,CST在实验室条件下能够迅速测得,根据CST以及关联模型可迅速完成脱水效果预测。 展开更多
关键词 污泥脱水 脱水特性 特性阻力 毛细吸入时间 滤后量
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部