期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
回转反循环若干特殊施工工艺的工程实践
1
作者 郭培合 俞青山 +1 位作者 李务伦 翟瑞忠 《中国煤炭地质》 2007年第3期70-72,共3页
针对在含有大径卵石块的地层、纯砂层,以磨擦桩为主的地层中进行大孔径回转反循环桩施工,提出了三种特殊施工工艺:筐捞法,小径漏石法,二次成孔法。筐捞法是在卵石直径小于孔半径10cm的地层中,利用焊有筐状盛器的钻头,通过钻具的旋转将... 针对在含有大径卵石块的地层、纯砂层,以磨擦桩为主的地层中进行大孔径回转反循环桩施工,提出了三种特殊施工工艺:筐捞法,小径漏石法,二次成孔法。筐捞法是在卵石直径小于孔半径10cm的地层中,利用焊有筐状盛器的钻头,通过钻具的旋转将卵石装入筐内,清除孔外;小径漏石法则是先钻一小孔径钻孔至漏石合适的深度,该深度要保证在大径钻头成孔时,石块或卵石能够落入漏石孔底,使之不影响钻进的连续性;二次成孔法是针对胶结性差、渗透性好的地层的一种施工工艺,其原理是利用密度约为1.15g/cm3冲洗液,在第一次钻孔后的犬牙交错的孔壁上,形成一定厚度的泥浆浸入带,保护二次成孔时孔壁不再产生损伤。 展开更多
关键词 钻探 回转反循环 筐捞 漏石法 二次成孔
下载PDF
Application of a Step-by-Step Fingerprinting Identification Method on a Spilled Oil Accident in the Bohai Sea Area 被引量:4
2
作者 SUN Peiyan GAO Zhenhui +4 位作者 CAO Lixin WANG Xinping ZHOU Qing ZHAO Yuhui LI Guangmei 《Journal of Ocean University of China》 SCIE CAS 2011年第1期35-41,共7页
In recent years,oil spill accidents occur frequently in the marine area of China.Finding out the spilled oil source is a key step in the relevant investigation.In this paper,a step-by-step fingerprinting identificatio... In recent years,oil spill accidents occur frequently in the marine area of China.Finding out the spilled oil source is a key step in the relevant investigation.In this paper,a step-by-step fingerprinting identification method was used in a spilled oil accident in the Bohai Sea in 2002.Advanced chemical fingerprinting and data interpretation techniques were used to characterize the chemical composition and determine the possible sources of two spilled oil samples.The original gas chromatography -flame ionization detec-tion (GC-FID) chromatogram of saturated hydrocarbons was compared.The gas chromatography-mass spectrometry (GC/MS) chromatograms of aromatic hydrocarbons terpane and sterane,n-alkane and poly-aromatic hydrocarbons (PAHs) were analyzed.The correlation analysis on diagnostic ratios was performed with Student’s t-test.It is found that the oil fingerprinting of the spilled oil (designated as sz1) from the polluted sand beach was identical with the suspected oil (designated as ky1) from a nearby crude oil refinery factory.They both showed the fingerprinting character of mixed oil.The oil fingerprinting of the spilled oil (designated as ms1) collected from the port was significantly different from oil ky1 and oil sz1 and was with a lubricating oil fingerprint character.The identification result not only gave support for the spilled oil investigation,but also served as an example for studying spilled oil accidents. 展开更多
关键词 step-by-step fingerprinting identification saturated hydrocarbons poly-aromatic hydrocarbons biomarkers Student'st-test
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部