The development of cleaning optics and deposition-mitigating techniques is a key factor in the construction and operation of optical diagnostics in ITER. The cleaning of optical surface by pulsed radiation from a fibe...The development of cleaning optics and deposition-mitigating techniques is a key factor in the construction and operation of optical diagnostics in ITER. The cleaning of optical surface by pulsed radiation from a fiber laser is an effective method that can recover optical properties of the mirror surface. The possibility of cleaning metallic mirrors from films with complex composition by pulsed radiation from a fiber laser has been experimentally researched. It has been shown that the high initial reflection characteristics of optical elements can be recovered by choosing regimes of radiation effect on the deposited surface. Efficient cleaning is ensured by radiation with the power density of less than 107 W/cm2. At this relatively low power density, pollutions are removed in a solid phase and the thermal effect on the mirror is insignificant. Preliminary experiments of the metal mirrors cleaning by fiber laser radiation have demonstrated the possibility of hardware implementation techniques.展开更多
Er3+-Yb3+ co-doped fiber of 2 m long is used as the laser gain medium. Two fiber lasers with different structures have been set up, one is the line cavity fiber laser with the dielectric mirror being replaced by an al...Er3+-Yb3+ co-doped fiber of 2 m long is used as the laser gain medium. Two fiber lasers with different structures have been set up, one is the line cavity fiber laser with the dielectric mirror being replaced by an all-fiber reflecting mirror,the other is the ring cavity all-fiber laser. Both set-ups have achieved lasing operation at the wavelength of 1.53 μm. Pumped by the 1 064 nm light from all-solid-state Nd ∶YAG laser, the two fiber lasers at 1 530 nm are operational. Their output powers are 7.8 mW and 2 mW with 130 mW and 160 mW pump powers.展开更多
The proton implantation is one of key procedures to confine the current diffusion in vertical cavity surface emitting lasers(VCSELs),in which the proton implanted depth and profile are main parameters.Threshold charac...The proton implantation is one of key procedures to confine the current diffusion in vertical cavity surface emitting lasers(VCSELs),in which the proton implanted depth and profile are main parameters.Threshold characteristics of VCSELs with various proton implanted depths are studied after optical,electrical and thermal fields have been simulated self-consistently in three dimensions.It is found that for VCSELs with confinement radius of 2 mm,increasing proton implanted depth can reduce the injected current threshold power and enhance the laser temperature in active region.Numerical results also indicate that there are optimal values for current aperture in proton implanted VCSELs.The minimum injected current threshold can be achieved in VCSELs with proton implantation near the active region and confinement radius of 1.5 mm,while the VCSELs with proton implantation in the middle of p-type distributed Bragg reflectors(DBRs) and confinement radius of 2.5 mm can realize the minimum temperature.展开更多
文摘The development of cleaning optics and deposition-mitigating techniques is a key factor in the construction and operation of optical diagnostics in ITER. The cleaning of optical surface by pulsed radiation from a fiber laser is an effective method that can recover optical properties of the mirror surface. The possibility of cleaning metallic mirrors from films with complex composition by pulsed radiation from a fiber laser has been experimentally researched. It has been shown that the high initial reflection characteristics of optical elements can be recovered by choosing regimes of radiation effect on the deposited surface. Efficient cleaning is ensured by radiation with the power density of less than 107 W/cm2. At this relatively low power density, pollutions are removed in a solid phase and the thermal effect on the mirror is insignificant. Preliminary experiments of the metal mirrors cleaning by fiber laser radiation have demonstrated the possibility of hardware implementation techniques.
文摘Er3+-Yb3+ co-doped fiber of 2 m long is used as the laser gain medium. Two fiber lasers with different structures have been set up, one is the line cavity fiber laser with the dielectric mirror being replaced by an all-fiber reflecting mirror,the other is the ring cavity all-fiber laser. Both set-ups have achieved lasing operation at the wavelength of 1.53 μm. Pumped by the 1 064 nm light from all-solid-state Nd ∶YAG laser, the two fiber lasers at 1 530 nm are operational. Their output powers are 7.8 mW and 2 mW with 130 mW and 160 mW pump powers.
基金supported by the Natural Science Foundation of Hebei Province (No.F2007000096)the Research Foundation for the Doctoral Program of Higher Education of China (No.20070080001)
文摘The proton implantation is one of key procedures to confine the current diffusion in vertical cavity surface emitting lasers(VCSELs),in which the proton implanted depth and profile are main parameters.Threshold characteristics of VCSELs with various proton implanted depths are studied after optical,electrical and thermal fields have been simulated self-consistently in three dimensions.It is found that for VCSELs with confinement radius of 2 mm,increasing proton implanted depth can reduce the injected current threshold power and enhance the laser temperature in active region.Numerical results also indicate that there are optimal values for current aperture in proton implanted VCSELs.The minimum injected current threshold can be achieved in VCSELs with proton implantation near the active region and confinement radius of 1.5 mm,while the VCSELs with proton implantation in the middle of p-type distributed Bragg reflectors(DBRs) and confinement radius of 2.5 mm can realize the minimum temperature.
