Measurement uncertainty plays an important role in laser tracking measurement analyses. In the present work, the guides to the expression of uncertainty in measurement(GUM) uncertainty framework(GUF) and its supplemen...Measurement uncertainty plays an important role in laser tracking measurement analyses. In the present work, the guides to the expression of uncertainty in measurement(GUM) uncertainty framework(GUF) and its supplement, the Monte Carlo method, were used to estimate the uncertainty of task-specific laser tracker measurements. First, the sources of error in laser tracker measurement were analyzed in detail, including instruments, measuring network fusion, measurement strategies, measurement process factors(such as the operator), measurement environment, and task-specific data processing. Second, the GUM and Monte Carlo methods and their application to laser tracker measurement were presented. Finally, a case study involving the uncertainty estimation of a cylindricity measurement process using the GUF and Monte Carlo methods was illustrated. The expanded uncertainty results(at 95% confidence levels) obtained with the Monte Carlo method are 0.069 mm(least-squares criterion) and 0.062 mm(minimum zone criterion), respectively, while with the GUM uncertainty framework, none but the result of least-squares criterion can be got, which is 0.071 mm. Thus, the GUM uncertainty framework slightly underestimates the overall uncertainty by 10%. The results demonstrate that the two methods have different characteristics in task-specific uncertainty evaluations of laser tracker measurements. The results indicate that the Monte Carlo method is a practical tool for applying the principle of propagation of distributions and does not depend on the assumptions and limitations required by the law of propagation of uncertainties(GUF). These features of the Monte Carlo method reduce the risk of an unreliable measurement of uncertainty estimation, particularly in cases of complicated measurement models, without the need to evaluate partial derivatives. In addition, the impact of sampling strategy and evaluation method on the uncertainty of the measurement results can also be taken into account with Monte Carlo method, which plays a guiding role in measurement planning.展开更多
In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the...In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S^1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.展开更多
Exhaust gas temperature is an important factor in NOx, THC and PM emissions of engines. Especially 2D temperature and concentration distribution plays an important role for the engine efficiency. A thermocouple is int...Exhaust gas temperature is an important factor in NOx, THC and PM emissions of engines. Especially 2D temperature and concentration distribution plays an important role for the engine efficiency. A thermocouple is intrinsically a point temperature measurement method and noncontact 2D temperature distribution cannot be attained by thermocouples. Recently, as a measurement technique with high sensitivity and high response, laser diagnostics has been developed and applied to the actual engine combustions. With these engineering developments, transient phenomena such as start-ups and load changes in engines have been gradually elucidated in various conditions. In this study, the theoretical and experimental research has been conducted in order to develop the noncontact and fast response 2D temperature and concentration distribution measurement method. The method is based on a Computed Tomography （CT） method using absorption spectra of water vapor at 1388 nm. It has been demonstrated that the method has been successfully applied to engine exhausts to measure 2D temperature distributions.展开更多
Two types of the dual mode-locked fiber lasers for asynchronous absolute distance measurement are investigated, The lasers are linear and ring cavity with repetition rate of 70 MHz and 100 MHz, respectively. The group...Two types of the dual mode-locked fiber lasers for asynchronous absolute distance measurement are investigated, The lasers are linear and ring cavity with repetition rate of 70 MHz and 100 MHz, respectively. The group velocity dispersion is not compensated in the first type of the lasers, while the others are fully done. The timing jitter with the Allan deviation below averaging time of 0.2 s during the distance measurement for around 1 m of both types of lasers were 2.5 ps with 600 nm and 1.6 ps with 200 nm. We concluded that the phase noise resulted from the intra-cavity dispersion is the main contribution for the uncertainty of the ranging in these two types of the lasers.展开更多
Optical-phase-retardation elements are widely used in many fields.Accurate measurement of their phase retardation is crucial to the practical effect of the element's processing and application.The development and ...Optical-phase-retardation elements are widely used in many fields.Accurate measurement of their phase retardation is crucial to the practical effect of the element's processing and application.The development and present situation of the methods for optical phase retardation measurement are reviewed,with the wave plate,the most typical phase-retardation element,as an example.The latest research progress in this field is introduced;the principles and characteristics of individual measurement method are summarized and discussed.Three new methods based on laser frequency splitting or laser feedback are presented in detail,in which the laser is not only regarded as a light source but also plays a role of sensor.Moreover,no standard wave plates are needed and arbitrary phase retardation can be measured.Traceability,high precision and high repeatability are achieved as well.展开更多
Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were empl...Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.展开更多
A new displacement measurement system is described in this paper according to the basic principles of traditional lasertriangulation method. The range of the traditional measuring method is enlarged by measuring in se...A new displacement measurement system is described in this paper according to the basic principles of traditional lasertriangulation method. The range of the traditional measuring method is enlarged by measuring in sections. Three independent CCDs, which are distributed uniformly along the optical axis, are used to achieve subsection measurement. The planemirror is regarded as a virtual detector. When imaging beam is reflected by the plane mirror, the beam is imaged on theCC D. The designed system is equivalent to add a CCD. The feasibility of the displacement measurement system is verifiedby the experiment.展开更多
基金Project(51318010402)supported by General Armament Department Pre-Research Program of China
文摘Measurement uncertainty plays an important role in laser tracking measurement analyses. In the present work, the guides to the expression of uncertainty in measurement(GUM) uncertainty framework(GUF) and its supplement, the Monte Carlo method, were used to estimate the uncertainty of task-specific laser tracker measurements. First, the sources of error in laser tracker measurement were analyzed in detail, including instruments, measuring network fusion, measurement strategies, measurement process factors(such as the operator), measurement environment, and task-specific data processing. Second, the GUM and Monte Carlo methods and their application to laser tracker measurement were presented. Finally, a case study involving the uncertainty estimation of a cylindricity measurement process using the GUF and Monte Carlo methods was illustrated. The expanded uncertainty results(at 95% confidence levels) obtained with the Monte Carlo method are 0.069 mm(least-squares criterion) and 0.062 mm(minimum zone criterion), respectively, while with the GUM uncertainty framework, none but the result of least-squares criterion can be got, which is 0.071 mm. Thus, the GUM uncertainty framework slightly underestimates the overall uncertainty by 10%. The results demonstrate that the two methods have different characteristics in task-specific uncertainty evaluations of laser tracker measurements. The results indicate that the Monte Carlo method is a practical tool for applying the principle of propagation of distributions and does not depend on the assumptions and limitations required by the law of propagation of uncertainties(GUF). These features of the Monte Carlo method reduce the risk of an unreliable measurement of uncertainty estimation, particularly in cases of complicated measurement models, without the need to evaluate partial derivatives. In addition, the impact of sampling strategy and evaluation method on the uncertainty of the measurement results can also be taken into account with Monte Carlo method, which plays a guiding role in measurement planning.
基金the National Natural Science Foundation of China(Grant No. 10576041)
文摘In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S^1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.
文摘Exhaust gas temperature is an important factor in NOx, THC and PM emissions of engines. Especially 2D temperature and concentration distribution plays an important role for the engine efficiency. A thermocouple is intrinsically a point temperature measurement method and noncontact 2D temperature distribution cannot be attained by thermocouples. Recently, as a measurement technique with high sensitivity and high response, laser diagnostics has been developed and applied to the actual engine combustions. With these engineering developments, transient phenomena such as start-ups and load changes in engines have been gradually elucidated in various conditions. In this study, the theoretical and experimental research has been conducted in order to develop the noncontact and fast response 2D temperature and concentration distribution measurement method. The method is based on a Computed Tomography （CT） method using absorption spectra of water vapor at 1388 nm. It has been demonstrated that the method has been successfully applied to engine exhausts to measure 2D temperature distributions.
文摘Two types of the dual mode-locked fiber lasers for asynchronous absolute distance measurement are investigated, The lasers are linear and ring cavity with repetition rate of 70 MHz and 100 MHz, respectively. The group velocity dispersion is not compensated in the first type of the lasers, while the others are fully done. The timing jitter with the Allan deviation below averaging time of 0.2 s during the distance measurement for around 1 m of both types of lasers were 2.5 ps with 600 nm and 1.6 ps with 200 nm. We concluded that the phase noise resulted from the intra-cavity dispersion is the main contribution for the uncertainty of the ranging in these two types of the lasers.
基金supported by the Key Program of National Natural Science Foundation of China(Grant No.61036016)
文摘Optical-phase-retardation elements are widely used in many fields.Accurate measurement of their phase retardation is crucial to the practical effect of the element's processing and application.The development and present situation of the methods for optical phase retardation measurement are reviewed,with the wave plate,the most typical phase-retardation element,as an example.The latest research progress in this field is introduced;the principles and characteristics of individual measurement method are summarized and discussed.Three new methods based on laser frequency splitting or laser feedback are presented in detail,in which the laser is not only regarded as a light source but also plays a role of sensor.Moreover,no standard wave plates are needed and arbitrary phase retardation can be measured.Traceability,high precision and high repeatability are achieved as well.
文摘Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.
基金supported by the Science and Technology Plan of Hebei Province, China (No. 10212149)
文摘A new displacement measurement system is described in this paper according to the basic principles of traditional lasertriangulation method. The range of the traditional measuring method is enlarged by measuring in sections. Three independent CCDs, which are distributed uniformly along the optical axis, are used to achieve subsection measurement. The planemirror is regarded as a virtual detector. When imaging beam is reflected by the plane mirror, the beam is imaged on theCC D. The designed system is equivalent to add a CCD. The feasibility of the displacement measurement system is verifiedby the experiment.
