汽车转向器零件的激光表面强化

研究了汽车转向器零件的激光淬火工艺和硬化组织特征。对激光淬火件进行了疲劳寿命、耐磨性、传动效率等综合性能试验。结果表明,对QT400—10材质的转向器零件,用激光表面强化方法代替DX轴承套在技术上和经济上是可行的。

Fluorescence Emission Mediated by Metal-Dielectric-Metal Fishnet Metasurface: Spatially Selective Excitation and Double Enhancement

Enhancement of uorescent radiation is of great importance for applications including biological imaging,high-sensitivity detectors,and integrated light sources.Strong electromagnetic elds can be created around metallic nanoparticles or in gap of nanostructures,where the local state density of radiating mode is then dramatically enhanced.While enhanced uorescent emission has been demonstrated in many metallic nanoparticles and nanoparticle pairs,simultaneous mediation of absorption and emission processes of uorescent emitters remains challenging in metallic nanostructures.Here,we investigate uorescent emission mediated by metal-dielectric-metal fishnet metasurface,in which localized surface plasmon(LSP)and magnetic plasmon polaritons(MPPs)modes are coupled with absorption and emission processes,respectively.For absorption process,coupling of the LSP mode enables spatially-selective excitation of the uorescent emitters by rotating the polarization of the pump laser beam.In addition,the polarization-dependent MPP mode enables manipulation of both polarization and wavelength of the uorescent emission by introducing a rectangular fishnet structure.All the experimental observations are further corroborated by nite-difference time-domain simulations.The structure reported here has great potential for application to color light-emitting devices and nanoscale integrated light sources.

Improved uniformity of deposited metallic layer on hybrid micro/nano-structured Si substrates fabricated by two-step laser ablation for SERS application

Surface-enhanced Raman scattering(SERS) has been widely used as an effective technique for lowconcentration molecules detections in the past decades. This work proposes a rapid and accessible process to fabricate SERS-active substrates with high uniformity and controllability based on two-step laser ablation. Laser beams directly ablate the surface of Si, concurrently creating microstructures and ejecting molten materials caused by the thermal effect that nucleate in ambient air. The nuclei grow into nanoparticles and deposit over the surface. These nanoparticles,together with microstructures, improve the light collection efficiency of the SERS-active substrates. Especially after Au thin film deposition, these nanoparticles can provide nanogaps as hotspots for SERS. By orthogonal experiment design,laser processing parameters for better performances are determined. Compared with substrates fabricated by single 1064 nm master oscillator power amplifier(MOPA) laser ablation, substrates ablated by the primary 1064 nm MOPA laser and secondary UV pulsed laser show more uniform nanoparticles’ deposition over the surface. The optimized largearea substrate has a SERS detection limit of 10^(-8)mol/L for 4-aminothiophenol(4-ATP), indicating the potential realworld applications for trace detection.

Single-row laser beam with energy strengthened ends for continuous scanning laser surface hardening of large metal components

For laser surface hardening of metal components with large superficies,a binary grating is proposed to generate single-row laser beam with proportional-intensity diffractive orders.To obtain a uniform hardened band distribution and improve the wear resistance of the sample surface,the binary grating is designed to produce single-row laser beam with energy strengthened at the two ends.The profile of the laser beam spot was designed to be strip with high length-width ratio to improve the machining efficiency of the hardening of large surfaces.A new advantage is suggested to obtain proportional intensity spots with evenness.The design results show that the diffractive efficiency of the binary grating is more than 70%,and the uniformity is less than 3%.The surface profile of the grating fabricated was measured,which shows that the fabrication error is less than 2%.The application of the binary grating in the laser surface hardening of metal components with large superficies is experimentally investigated,and the results show that the hardness distribution of the modified layer is more uniform than that hardened by Gaussian laser beam or array spots with equal intensity distribution.