期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
外墙保温材料的火灾传播及预防 被引量:2
1
作者 王利秋 《消防科学与技术》 CAS 北大核心 2016年第9期1253-1255,共3页
介绍外墙保温材料对建筑物火灾传播尤其是竖向传播的影响,分析、总结了建筑物火灾在外墙的传播方式。对外墙保温材料燃烧特点、防火隔离带距离及宽度对建筑火灾外墙竖向传播的影响进行研究,并对防火隔离带的设计提出建设性意见。
关键词 外墙保温材料 火灾传播 防火隔离带
下载PDF
基于多米诺效应的石油储备库火灾传播规律研究
2
作者 张一凡 高寒 +1 位作者 史红星 赵江平 《工业安全与环保》 2023年第12期39-42,共4页
依据多米诺效应理论,以某国储基地一罐组为例进行研究分析,建立了基于贝叶斯网络的罐区火灾多米诺事故传播过程模型,从而得出初始事故发生后各储罐事故发生概率,识别出对事故传播过程影响最大的储罐单元,对其应加强防控,为石油储备库多... 依据多米诺效应理论,以某国储基地一罐组为例进行研究分析,建立了基于贝叶斯网络的罐区火灾多米诺事故传播过程模型,从而得出初始事故发生后各储罐事故发生概率,识别出对事故传播过程影响最大的储罐单元,对其应加强防控,为石油储备库多米诺效应事故应急决策提供理论依据。 展开更多
关键词 石油罐区 多米诺效应 贝叶斯网络 火灾传播规律
下载PDF
建筑全盛期火灾导致建筑构件失效概率分析
3
作者 翟振宇 周劼波 +1 位作者 王爽 江平 《消防科学与技术》 CAS 北大核心 2015年第11期1414-1419,共6页
以某大学一栋宿舍楼为分析对象,基于火灾载荷密度统计数据和建筑特征,应用CIBW14方法确定建筑当量标准火灾及其概率分布;结合当量标准火灾的分布规律和边界构件的耐火极限,确定全盛期火灾导致建筑构件失效概率;应用非互斥事件联合... 以某大学一栋宿舍楼为分析对象,基于火灾载荷密度统计数据和建筑特征,应用CIBW14方法确定建筑当量标准火灾及其概率分布;结合当量标准火灾的分布规律和边界构件的耐火极限,确定全盛期火灾导致建筑构件失效概率;应用非互斥事件联合概率计算原理,确定全盛期火灾突破边界构件,在竖直与水平方向的传播概率。结果表明:火灾载荷密度基本上符合正态分布;寝室的当量标准火灾时间在43~61min之间。建议将寝室门全部更换为耐火极限更高的防火门。 展开更多
关键词 火灾传播 建筑构件失效 耐火极限 当量标准 火灾 概率分布
下载PDF
林火三维蔓延的数学模型和计算机仿真 被引量:2
4
作者 刘军万 李舟军 文定元 《消防科学与技术》 CAS 2006年第3期310-314,共5页
通过在直坡表面上对同种条件的林火蔓延的分析,建立各种坡度表面上不同条件下林火蔓延的数学模型,并对偏微分方程进行数字化求解,对各种复杂表面条件的火灾模型进行了合理的实验仿真。
关键词 森林火灾 火灾行为 火灾传播 计算机仿真
下载PDF
Experimental study and numerical simulation of spread law for fire on tunnel 被引量:3
5
作者 牛会永 乔晨露 +1 位作者 安敬鱼 邓军 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第2期701-706,共6页
In order to research spread law and distribution law of temperature nearby fire sources on roadway in mine, according to combustion theory and other basic, the theory model of temperature attenuation was determined un... In order to research spread law and distribution law of temperature nearby fire sources on roadway in mine, according to combustion theory and other basic, the theory model of temperature attenuation was determined under unsteady heat-exchange between wind and roadway wall. The full-size roadway fire simulation experiments were carried out in Chongqing Research Institute of China Coal Technology & Engineering Group Corporation. The development processes of mine fire and flow pattern of high temperature gas were analyzed. Experimental roadway is seen as physical model, and through using CFD software, the processes of mine fire have been simulated on computer. The results show that, after fire occurs, if the wind speed is less than the minimum speed which can prevent smoke from rolling back, then the smaller wind speed can cause smoke to roll back easily. Hot plume will lead to secondary disasters in upwind side. Because of roadway wall, hot plume released from roadway fire zone has caused the occurrence of the ceiling jet, and the hot plume has been forced down. Whereas, owing to the higher temperature, buoyancy effect is more obvious. Therefore, smoke rises gradually along the roadway in the flow process, and the hierarchical interface appears wavy.Oxygen-enriched combustion and fuel-enriched combustion are the two kinds of combustion states of fire. The oxygen content of downwind side of fire is maintained at around 15% for oxygen-enriched combustion, and the oxygen content of downwind side of fire is maintained at around 2% for fuel-enriched combustion. Furthermore, fuel-enriched combustion can lead to secondary disasters easily. 展开更多
关键词 fire on roadway experiments of fire numerical simulation
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部