WT8.BZ]The effects of postgrowth rapid thermal annealing have been studied on the optical properties of 3-nm-height InAs/GaAs quantum dots covered by 3-nm-thick In xGa 1-x As (x=0,0 1 and 0 2) overgrowth layer...WT8.BZ]The effects of postgrowth rapid thermal annealing have been studied on the optical properties of 3-nm-height InAs/GaAs quantum dots covered by 3-nm-thick In xGa 1-x As (x=0,0 1 and 0 2) overgrowth layer.At a higher annealing temperature (T≥750℃),the photoluminescence peak of InGaAs layer has been observed at the lower-energy side of InAs quantum-dot peak.In addition,a similar blueshift in photoluminescence (PL) emission energy is observed for all samples when the annealing temperature increases from 650 to 850℃.However,the trend of photoluminescence linewidth towards narrowing is totally different for InAs quantum dots with different In mole fraction in InGaAs overgrowth layer.The results suggest that the intermixing in the lateral direction plays an important role in obtaining a better understanding of the modification of optical properties induced by the rapid thermal annealing.展开更多
As the influence of the ratio of the characteristic value of structural resistance to that of frequent combination effect, K, on the thickness of concrete cover of prestressed concrete （PC） beams and slabs for fire ...As the influence of the ratio of the characteristic value of structural resistance to that of frequent combination effect, K, on the thickness of concrete cover of prestressed concrete （PC） beams and slabs for fire resistance is not considered sufficiently in design criteria for concrete structures in China and other countries at present, numerical analyses were carried out by ANSYS software on unbonded prestressed concrete （UPC） oneway simply-supported and continuous slabs and beams, and bonded PC simply-supported and continuous beams subjected to fire in 186 cases. In the analysis, K, section dimensions and the thickness of concrete cover are regarded as independent variables and some calculation parameters determined by trial and error based on test resuits. Calculation formula for fire endurance of UPC simply-supported and continuous slabs was proposed, and the recommended thicknesses of cover of PC beams and slabs was presented in consideration of the influence of K and section dimensions as well as fire endurance requirements. Comparison analysis of relevant design criterions in China and other countries was performed to verify the rationale of the proposed values.展开更多
Compared to burn interiors, edges exhibit distinct biotic and abiotic conditions that include microclimate, wind speed, sunlight levels, soil composition, moisture content, nutrient availability, population density, a...Compared to burn interiors, edges exhibit distinct biotic and abiotic conditions that include microclimate, wind speed, sunlight levels, soil composition, moisture content, nutrient availability, population density, and species diversity. This study characterized the landscapes in which burned forest edges formed in Samcheok, Korea. Over the study area, 500-m2 grid cells were generated to capture landscape characteristics. Grid cells intersecting burn boundary lines were designated as edge, while cells without these lines were classified as the interior of burned areas. Topographic variables including slope, elevation, topographic wetness index, solar radiation index, and proportions of fuel and land use types within grid cells were computed in a geographical information system(GIS). Correlation analysis with modified t-test and regression tree analysis were performed to explore the influences of landscape variables on edge formation with avoiding spatial autocorrelation problems. The results indicated that edges formed at low elevations with mild slopes, high topographic wetness, and low solar radiation. Edges were unlikely to form in areas dominated by Japanese red pines at low elevations. Moreover, heterogeneous land use/cover types contributed significantly to edge formation. Different forest management strategies for different landscape conditions can be more effective for enhancing resilience of forests to fire. Reducing susceptible fuel types might be effective at low elevations, while enhancing forest heterogeneity might be more effective at high elevations.展开更多
In order to minimise the bushfires negative impacts on society, an efficient andreliable bushfire detection system was proposed to assess the devastated effects of the2009 Victorian bushfires.It is possible to utilise...In order to minimise the bushfires negative impacts on society, an efficient andreliable bushfire detection system was proposed to assess the devastated effects of the2009 Victorian bushfires.It is possible to utilise the repetitive capability of satellite remotesensing imagery to identify the location of change to the Earth's surface and integrate thedifferent remotely sensed indices.The results confirm that the procedure can offer essentialspatial information for bushfire assessment.展开更多
Post-fire field measurements of sediment and run off yield were undertaken in natural rainfall event-basis during five rainy months in Korea on a total of 15 small plots: four replica burned unseeded plots, six replic...Post-fire field measurements of sediment and run off yield were undertaken in natural rainfall event-basis during five rainy months in Korea on a total of 15 small plots: four replica burned unseeded plots, six replica burned seeded plots, and five replica unburned plots. The main aim was to evaluate the effects of vegetation recovery and spatial distribution patterns on sediment and runoff response between and within the treatment replica erosion plots. Sixyears after the wildfire, total sediment and runoff yield in the burned unseeded plots with 20%-30%vegetation cover was still 120.8 and 20.6 times higher than in the unburned treatment plots with 100%ground cover, 8.3 and 6.7 times higher than in the burned seeded plots with 70%-80% vegetation cover,while only 1.6 and 2.0 times higher than in the burned seeded plots with 50%-60% vegetation cover,respectively. The differences in sediment and runoff yield between the treatment plots was proportional to total vegetation cover, distance of bare soil to vegetation cover, magnitude of rainfall characteristics and changes in soil properties, but not slope gradient.Three out of the six within-treatment pairs of two replica plots showed large differences in sediment and runoff yield of up to 6.0 and 4.2 times and mean CV of up to 99.1% and 62.2%, respectively. This was due to differences in the spatial distribution patterns of surface cover features, including aggregation of vegetation and litter covers, the distance of bare soil exposed to vegetation cover closer to the plot sediment collector and micro topographic mounds and sinks between pairs of replica plots. Small differences in sediment and runoff of only 0.9-1.4folds and mean CV of 8.6%-25% were observed where the within-treatment pairs of replica plots had similar slope, total surface cover components and comparable spatial distribution pattern of vegetation and bare soil exposed surface covers. The results indicated that post-fire hillslopes undergoing effective vegetation recovery have the potential to reduce sediment and runoff production nearer to unburned levels within 6-years after burning while wildfire impacts could last more than 6-years on burned unseeded ridge slopes undergoing slow vegetation recovery.展开更多
文摘WT8.BZ]The effects of postgrowth rapid thermal annealing have been studied on the optical properties of 3-nm-height InAs/GaAs quantum dots covered by 3-nm-thick In xGa 1-x As (x=0,0 1 and 0 2) overgrowth layer.At a higher annealing temperature (T≥750℃),the photoluminescence peak of InGaAs layer has been observed at the lower-energy side of InAs quantum-dot peak.In addition,a similar blueshift in photoluminescence (PL) emission energy is observed for all samples when the annealing temperature increases from 650 to 850℃.However,the trend of photoluminescence linewidth towards narrowing is totally different for InAs quantum dots with different In mole fraction in InGaAs overgrowth layer.The results suggest that the intermixing in the lateral direction plays an important role in obtaining a better understanding of the modification of optical properties induced by the rapid thermal annealing.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50678050)the Outstanding Youth Science Foundation of Heilongjiang Province(Grant No.2001-8)
文摘As the influence of the ratio of the characteristic value of structural resistance to that of frequent combination effect, K, on the thickness of concrete cover of prestressed concrete （PC） beams and slabs for fire resistance is not considered sufficiently in design criteria for concrete structures in China and other countries at present, numerical analyses were carried out by ANSYS software on unbonded prestressed concrete （UPC） oneway simply-supported and continuous slabs and beams, and bonded PC simply-supported and continuous beams subjected to fire in 186 cases. In the analysis, K, section dimensions and the thickness of concrete cover are regarded as independent variables and some calculation parameters determined by trial and error based on test resuits. Calculation formula for fire endurance of UPC simply-supported and continuous slabs was proposed, and the recommended thicknesses of cover of PC beams and slabs was presented in consideration of the influence of K and section dimensions as well as fire endurance requirements. Comparison analysis of relevant design criterions in China and other countries was performed to verify the rationale of the proposed values.
文摘Compared to burn interiors, edges exhibit distinct biotic and abiotic conditions that include microclimate, wind speed, sunlight levels, soil composition, moisture content, nutrient availability, population density, and species diversity. This study characterized the landscapes in which burned forest edges formed in Samcheok, Korea. Over the study area, 500-m2 grid cells were generated to capture landscape characteristics. Grid cells intersecting burn boundary lines were designated as edge, while cells without these lines were classified as the interior of burned areas. Topographic variables including slope, elevation, topographic wetness index, solar radiation index, and proportions of fuel and land use types within grid cells were computed in a geographical information system(GIS). Correlation analysis with modified t-test and regression tree analysis were performed to explore the influences of landscape variables on edge formation with avoiding spatial autocorrelation problems. The results indicated that edges formed at low elevations with mild slopes, high topographic wetness, and low solar radiation. Edges were unlikely to form in areas dominated by Japanese red pines at low elevations. Moreover, heterogeneous land use/cover types contributed significantly to edge formation. Different forest management strategies for different landscape conditions can be more effective for enhancing resilience of forests to fire. Reducing susceptible fuel types might be effective at low elevations, while enhancing forest heterogeneity might be more effective at high elevations.
文摘In order to minimise the bushfires negative impacts on society, an efficient andreliable bushfire detection system was proposed to assess the devastated effects of the2009 Victorian bushfires.It is possible to utilise the repetitive capability of satellite remotesensing imagery to identify the location of change to the Earth's surface and integrate thedifferent remotely sensed indices.The results confirm that the procedure can offer essentialspatial information for bushfire assessment.
基金support of‘Forest Science and Technology Projects(Project No.S211216L020210)provided by Korea Forest Service
文摘Post-fire field measurements of sediment and run off yield were undertaken in natural rainfall event-basis during five rainy months in Korea on a total of 15 small plots: four replica burned unseeded plots, six replica burned seeded plots, and five replica unburned plots. The main aim was to evaluate the effects of vegetation recovery and spatial distribution patterns on sediment and runoff response between and within the treatment replica erosion plots. Sixyears after the wildfire, total sediment and runoff yield in the burned unseeded plots with 20%-30%vegetation cover was still 120.8 and 20.6 times higher than in the unburned treatment plots with 100%ground cover, 8.3 and 6.7 times higher than in the burned seeded plots with 70%-80% vegetation cover,while only 1.6 and 2.0 times higher than in the burned seeded plots with 50%-60% vegetation cover,respectively. The differences in sediment and runoff yield between the treatment plots was proportional to total vegetation cover, distance of bare soil to vegetation cover, magnitude of rainfall characteristics and changes in soil properties, but not slope gradient.Three out of the six within-treatment pairs of two replica plots showed large differences in sediment and runoff yield of up to 6.0 and 4.2 times and mean CV of up to 99.1% and 62.2%, respectively. This was due to differences in the spatial distribution patterns of surface cover features, including aggregation of vegetation and litter covers, the distance of bare soil exposed to vegetation cover closer to the plot sediment collector and micro topographic mounds and sinks between pairs of replica plots. Small differences in sediment and runoff of only 0.9-1.4folds and mean CV of 8.6%-25% were observed where the within-treatment pairs of replica plots had similar slope, total surface cover components and comparable spatial distribution pattern of vegetation and bare soil exposed surface covers. The results indicated that post-fire hillslopes undergoing effective vegetation recovery have the potential to reduce sediment and runoff production nearer to unburned levels within 6-years after burning while wildfire impacts could last more than 6-years on burned unseeded ridge slopes undergoing slow vegetation recovery.
