岩溶地下水系统灰色特征及灰参模型研究——以桂林东区岩溶裂隙管道、凯里岩溶裂隙地下水系统为例(英文)

本文结合岩溶地下水系统自身所具有的灰色特征,首次把灰色系统理论引入地下水渗流模型中,建立起具有灰源汇项、灰边界、灰水文地质参数等灰变量岩溶地下水系统水流模型（KGSGPM）;研究了水文地质灰参数求解方法——枯、雨季参数法和最优区间参数法。并把灰参模型应用于贵州凯里岩溶裂隙和广西桂林东区岩溶裂隙管道两种类型地下水系统中,取得了更符合系统特征的水文地质参数,为复杂和多变的岩溶地下水系统评价提出了一种方法。同时文中还从另一侧面进一步研究了在多孔介质上建立的达西流模型对岩溶地下水系统的适应性。两种类型的计算结果表明,岩溶裂隙管道型比岩溶裂隙型其水文地质参数具有更大的灰度。

Research Progress on the Control of Ginseng Gray Mold

This review article describes the research progresses on the control of ginseng gray mold, summarizes domestic and international related experimental re-sults and literature data using chemical fungicide, plant extracts, microbial prepara-tion and antagonistic bacteria to control ginseng gray mold, and final y puts forward the existing problem and future research direction of the treatment and control of ginseng gray mold.

Hydration process of rice husk ash cement paste and its corrosion resistance of embedded steel bar

Thermogravimetric analysis and electrical resistivity were used to determine the hydration process of cement paste with rice husk ash(RHA)(0−15%)and water-cement ratio of 0.4 in this work.X-ray diffraction(XRD)method and scanning electron microscopy(SEM)were used to survey crystal composition and microstructures of specimens cured for 3 h,1 d,7 d and 28 d.Finally,electrical parameters(electrical resistance and AC impedance spectroscopy)of steel bars reinforced cement paste were investigated to study the effect of RHA on the corrosion resistance.Results showed that RHA could affect the cement hydration by hydration promotion and pozzolanic effect.The evaluation function for electrical resistivity and curing ages fitted well with linear increasing function.The addition of RHA higher than 5%demonstrated a decreasing role in the electrical resistivity of cement paste at earlier curing ages(3−7 d).Meanwhile,when at later curing ages(7−28 d)the result was the opposite.Moreover,RHA demonstrated positive effects on corrosion resistance of steel bars in cement paste.

A matching algorithm based on hybrid matrices consisting of reference differences and disparities

Unique correct correspondence cannot be obtained only by use of gray correlation technique, which describes gray similar degree of feature points between the left and right images too unilaterally. The gray correlation technique is adopted to extract gray correlation peaks as a coarse matching set called multi-peak set. The disparity gradient limited constraint is utilized to optimize the multi-peak set. Unique match will be obtained by calculating the correlation of hybrid matrices consisting of reference differences and disparities from the multi-peak set. Two of the known corresponding points in the left and right images, respectively, are set as a pair of reference points to determine search direction and search scope at first. After the unique correspondence is obtained by calculating the correlation of the hybrid matrices from the multi-peak set, the obtained match is regarded as a new reference point till all feature points in the left (or right) image have been processed. Experimental results proved that the proposed algorithm was feasible and accurate.

Experimental Investigation of Environmental Hydraulic Parameters for Dual Mixed Media Biofilter for Greywater Treatment

Laboratory scale model of DMMBF （dual mixed media biofilter） were designed and installed in AI-Mustansiriya University Environmental Hydraulic Lab. Experiments were conducted using two mixed layers through PVR column--2.2 m height and 300 mm diameter. The first mixed media filter of depth 640mm mixed of sand, rice husk and granular activated carbon. The percentage volume mix is 1：1：1. While the other mixed media of depth 740 mm, consisting of coal, crash porcelinaite, rock and granite with equally percentage volume. Fifty samples were collected during the experiments, which was spread over a period of forty two weeks. The obtained results indicate that when the flow loading raised from 0.15 L/min to 2.7 L/rain, the removal efficiency of BOD decreased 8%-11%, and the removal efficiency of COD deceased 3%-4%, while the removal efficiency of turbidity increased with the decreasing of hydraulic loading. The results showed that the removal efficiency of turbidity is more than 95% at the lower discharge （0.15 L/min）. Therefore, infiltration should be conservatively designed using low loading rates.

A Case Study on Parameters Influencing Dust Accumulation on CSP Reflectors

The effect of dust accumulation on CST （concentrated solar thermal） reflectors is to deflect, or scatter, incident light rays missing the receiver with a subsequent power produced loss. Dust fouling is site specific, and the understanding of interactions between different weather and or environmental parameters is crucial for plant profitability. This research intends to provide useful insights on the interaction between the most relevant weather parameters affecting soil accumulation. Results show a significant dependency of dust concentration versus humidity and ambient temperature, as well as a nexus between wind speed and ambient temperature seems to exist. As long as the temperature decreases an increase of humidity and dust concentration occurs. This phenomenon takes place mostly overnight till the first hours of the morning. Therefore, mirror＇s reflectance looks extremely affected by dust accumulation because of high humidity rate during the night and dews of early morning. Further investigations are required to validate the hypothesis that, a more effective cleaning activitie to restore plants＇ reflectivity are to be carried out during the early morning.

Identification of key genes and active anti-inflammatory ingredients in Panax medicinal plants by climate-regulated callus culture combined with gene-component-efficacy gray correlation analysis

Objective:We aimed to establish a novel strategy for identifying key genes and active anti-inflammatory ingredients in Panax medicinal plants.Methods:First,fresh roots of 2-year-old Panax plants,including P.ginseng C.A.Mey.,P.quinquefolium L.,P.notoginseng(Burk.)F.H.Chen,P.japonicus C.A.Mey.,P.japonicus Mey.var.major(Burk.)C.Y.Wu et K.M.Feng,were selected as explants,and callus formation was induced under three experimental temperatures(17,24,and 30℃).Second,high-performance liquid chromatography-mass spectrometry was used to analyze the saponin content of the callus.Nitric oxide reduction efficacy was used for“component-efficacy”gray correlation analysis to find the active anti-inflammatory ingredients.Quantitative reverse-transcription polymerase chain reaction(qRT-PCR)was used to determine the inflammatory factors and verify the active ingredients’anti-inflammatory effects.Finally,qRT-PCR was used to detect the expression of key genes in the callus,and“gene-component”gray correlation analysis was used to examine the relationships between the regulatory pathway of the genes and the components.Results:Among the three experimental temperatures(17,24,and 30℃),the lowest temperature(17℃)is the most suitable for generating Panax callus.Lower-latitude native Panax notoginseng is more adaptable under high culture temperatures(24℃and 30℃)than other Panax plants.The ginsenoside contents of the callus of P.notoginseng and P.japonicus were the highest under similar climate conditions(17℃).Major anti-inflammatory components were G-Rh1,G-Rb1,G-Rg3,and G-Rh6/FloralGKa.CYP76A47 contributed to the accumulation of anti-inflammatory components.Conclusions:This study provides a strategy for the gene-component-efficacy correlational study of multi-component,multi-functional,and multi-purpose plants of the same genus.

Multi-objective optimization of crimping of large-diameter welding pipe

Crimping is widely adopted in the production of large-diameter submerged-arc welding pipes. Traditionally, designers obtain the technical parameters for crimping from experience or by trial and error through experiments and the finite element(FE) method. However, it is difficult to achieve ideal crimping quality by these approaches. To resolve this issue, crimping parameter design was investigated by multi-objective optimization. Crimping was simulated using the FE code ABAQUS and the FE model was validated experimentally. A welding pipe made of X80 high-strength pipeline steel was considered as a target object and the optimization problem for its crimping was formulated as a mathematical model and crimping was optimized. A response surface method based on the radial basis function was used to construct a surrogate model; the genetic algorithm NSGA-II was adopted to search for Pareto solutions; grey relational analysis was used to determine the most satisfactory solution from the Pareto solutions. The obtained optimal design of parameters shows good agreement with the initial design and remarkably improves the crimping quality. Thus, the results provide an effective approach for improving crimping quality and reducing design times.

Study on extracting alumina from fly ash by compound additive activation method

According to the chemical and mineral composition characteristics of the fly ash,alumina can be extracted from fly ash through the calcining method by using sodium carbonate and calcium carbonate additives.The effects on leaching rate of alumina have been investigated. The results showed that the fly ash can be activated effectively and the leaching rate of alumina can be improved to more than 92% through this method. The best process parameters were the ratio of raw materials,i. e. the material weight ratio of fly ash,calcium carbonate and sodium carbonate was 1. 0∶1. 2∶0. 9. The activating temperature was 850℃-900℃,activating time was 3 h. This process has a potential application prospect and improves the value of comprehensive utilization of fly ash.

Nonlinear Structures in an Ion-Beam Plasmas Including Dust Impurities with Nonthermal Nonextensive Electrons

The properties of dust ion acoustic waves are investigated in an unmagnetized multicomponent plasma system consisting of ion beam, charged positive and negative ions, electrons obeying nonthermal-Tsallis distribution and stationary negatively charged dust grains by the conventional Sagdeev pseudopotential method, through which the condition for existence of several nonlinear structures is analyzed theoretically. The dispersion relation for electrostatic waves is derived and analyzed and an expression of the energy integral equation is obtaJned. It is reported here that our plasma model supports solitions, double layers and supersoliton solutions for certain range of parameters. Finally, the effects of different physical plasma parameters on these nonlinear structures are studied numerically. The present theory should be helpful in understanding the salient features of the electrostatic waves in space and in laboratory plasmas where two distinct groups of ions and non-Maxwellian distributed electrons are present.