Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the potential utilization of coal in the thermal industries. The primary objective of t...Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the potential utilization of coal in the thermal industries. The primary objective of this work is to analyze the quality of Indian Coals and obtain their mineral species-specific information at different depths. The samples were obtained from Talcher Coalfield, Odisha, India. Coal from four seam sections in the Talcher coalfield, India are mainly high ash coal （〉50 %） and volatile matter deceases along with the seam depth. XRD results show that the major mineral phases present in the coal are quartz and kaolinite. Siderite, illite, and anatase were found in minor quantities. It has been observed that the clay minerals （kaolinite, silimanite, illite） decompose at higher temperature and traces of dolomite, mullite, hematite etc. are formed during the process of combustion. Among the four seams （M2, M12, M24 and M43） studied, ash of M43 has high A1203%, TIO2% and K20% content and low SIO2%, CaO% and MgO% content. High acid- to-base ratios contributed to high ash fusion temperatures （IDT 〉 1500 ℃） and low slagging potential of the coals studied. Relatively low fouling index （〈0.3） was estimated for all the coal seams studied. Furthermore, thermodynamic modeling software, FactSage, have been used to envision the mineral phase transformations that take place between 800 and 1500℃ during coal combustion.展开更多
To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, ...To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air. The effects of A1203, SiO2, kaolin, dry powder and bentonite on ash fusibility temperatures were studied, based upon the relationship between briquette ash components and ash fusibility. The results show that the increasing of ash fusibility temperatures by adding the same amount （11%, w） of refractory agents follows the sequence of SiO2, bentonite, dry powder, kaolin, A1203, with the softening temperatures being elevated by 37.2, 57.6, 60.4, 82.6 and 104.4℃. With the same ratio of SIO2/A1203 in briquette, adding the A1203 component is more effective than SiO2 for raising ash fusibility temperatures. In this paper, inexpensive kaolin and bentonite rich in A1203 are found to be better refractory agents, and the suitable adding quantities are 9% and 11%, respectively.展开更多
Air content, spacing factor and specific surface of fresh concrete and hardened concrete with different air contents, slumps and mineral admixtures (fly ash, slag, fly ash + slag, fly ash + slag + silica fume composit...Air content, spacing factor and specific surface of fresh concrete and hardened concrete with different air contents, slumps and mineral admixtures (fly ash, slag, fly ash + slag, fly ash + slag + silica fume composite) were studied by the air-void analyzer (AVA) method and the microscopical method. The correlations between the test results obtained from different methods were analyzed. The results show that, there is a close correlation of air content and spacing factor between the fresh concrete and the hardened concrete, but the specific surface correlation is weak. The air content of concrete measured by the AVA method is smaller than that of the pressure method and the microscopical method, because AVA device captures only the air voids with the size smaller than 3 mm. Spacing factor of the fresh concrete measured by the AVA method is greater than that of the hardened concrete measured by the microscopical method, while the specific surface is smaller. When the criterion of 4%-7% air content measured by the pressure method and microscopical method is acceptable for concrete freezing-thawing (F-T) durability in cold weather, the air content measured by the AVA method should be 2.4%-4.6%. For the concrete F-T durability, when the criterion of the spacing factor measured by the microscopical method is 300 μm, the spacing factor measured by the AVA method should be 360 μm.展开更多
Isolated finger millet （Eleucine coracana） starch was subjected to different modifications （hydrothermal, acidic and enzymatic） and characterized in terms of yield, moisture, protein, ash, bulk density, swelling p...Isolated finger millet （Eleucine coracana） starch was subjected to different modifications （hydrothermal, acidic and enzymatic） and characterized in terms of yield, moisture, protein, ash, bulk density, swelling power, solubility, sediment volume, colour, gel consistency, water binding capacity （WBC）, pasting properties, freeze thaw stability and paste clarity, and compared with native starch. Moisture content ranged from 4%-5%. Protein and ash content were lowest in case of acid modified starch （AMS）. Hydrothermally modified starches （HTMS） showed maximum water binding, peak viscosity and syneresis. Swelling power was decreased for all modifications. Solubility and color （a and b values） decreased for AMS and EMS. However, L values increased with all modifications. EMS showed maximum bulk density, swelling power, solubility, and sediment volume and gel consistency. Paste clarity decreased with storage period and found maximum for EMS.展开更多
文摘Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the potential utilization of coal in the thermal industries. The primary objective of this work is to analyze the quality of Indian Coals and obtain their mineral species-specific information at different depths. The samples were obtained from Talcher Coalfield, Odisha, India. Coal from four seam sections in the Talcher coalfield, India are mainly high ash coal （〉50 %） and volatile matter deceases along with the seam depth. XRD results show that the major mineral phases present in the coal are quartz and kaolinite. Siderite, illite, and anatase were found in minor quantities. It has been observed that the clay minerals （kaolinite, silimanite, illite） decompose at higher temperature and traces of dolomite, mullite, hematite etc. are formed during the process of combustion. Among the four seams （M2, M12, M24 and M43） studied, ash of M43 has high A1203%, TIO2% and K20% content and low SIO2%, CaO% and MgO% content. High acid- to-base ratios contributed to high ash fusion temperatures （IDT 〉 1500 ℃） and low slagging potential of the coals studied. Relatively low fouling index （〈0.3） was estimated for all the coal seams studied. Furthermore, thermodynamic modeling software, FactSage, have been used to envision the mineral phase transformations that take place between 800 and 1500℃ during coal combustion.
文摘To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air. The effects of A1203, SiO2, kaolin, dry powder and bentonite on ash fusibility temperatures were studied, based upon the relationship between briquette ash components and ash fusibility. The results show that the increasing of ash fusibility temperatures by adding the same amount （11%, w） of refractory agents follows the sequence of SiO2, bentonite, dry powder, kaolin, A1203, with the softening temperatures being elevated by 37.2, 57.6, 60.4, 82.6 and 104.4℃. With the same ratio of SIO2/A1203 in briquette, adding the A1203 component is more effective than SiO2 for raising ash fusibility temperatures. In this paper, inexpensive kaolin and bentonite rich in A1203 are found to be better refractory agents, and the suitable adding quantities are 9% and 11%, respectively.
基金Project(50908229) supported by the National Natural Science Foundation of ChinaProjects(2008G031-N, 50908229, 10125C131) supported by Technological Research and Development Programs of the Ministry of Railways, China
文摘Air content, spacing factor and specific surface of fresh concrete and hardened concrete with different air contents, slumps and mineral admixtures (fly ash, slag, fly ash + slag, fly ash + slag + silica fume composite) were studied by the air-void analyzer (AVA) method and the microscopical method. The correlations between the test results obtained from different methods were analyzed. The results show that, there is a close correlation of air content and spacing factor between the fresh concrete and the hardened concrete, but the specific surface correlation is weak. The air content of concrete measured by the AVA method is smaller than that of the pressure method and the microscopical method, because AVA device captures only the air voids with the size smaller than 3 mm. Spacing factor of the fresh concrete measured by the AVA method is greater than that of the hardened concrete measured by the microscopical method, while the specific surface is smaller. When the criterion of 4%-7% air content measured by the pressure method and microscopical method is acceptable for concrete freezing-thawing (F-T) durability in cold weather, the air content measured by the AVA method should be 2.4%-4.6%. For the concrete F-T durability, when the criterion of the spacing factor measured by the microscopical method is 300 μm, the spacing factor measured by the AVA method should be 360 μm.
文摘Isolated finger millet （Eleucine coracana） starch was subjected to different modifications （hydrothermal, acidic and enzymatic） and characterized in terms of yield, moisture, protein, ash, bulk density, swelling power, solubility, sediment volume, colour, gel consistency, water binding capacity （WBC）, pasting properties, freeze thaw stability and paste clarity, and compared with native starch. Moisture content ranged from 4%-5%. Protein and ash content were lowest in case of acid modified starch （AMS）. Hydrothermally modified starches （HTMS） showed maximum water binding, peak viscosity and syneresis. Swelling power was decreased for all modifications. Solubility and color （a and b values） decreased for AMS and EMS. However, L values increased with all modifications. EMS showed maximum bulk density, swelling power, solubility, and sediment volume and gel consistency. Paste clarity decreased with storage period and found maximum for EMS.
