Lithium-ion batteries(LIBs)are used in electric vehicles and portable smart devices,but lithium resources are dwindling and there is an increasing demand which has to be catered for.Sodium ion batteries(SIBs),which ar...Lithium-ion batteries(LIBs)are used in electric vehicles and portable smart devices,but lithium resources are dwindling and there is an increasing demand which has to be catered for.Sodium ion batteries(SIBs),which are less costly,are a promising replacement for LIBs because of the abundant natural reserves of sodium.The anode of a SIB is a necessary component of the battery but is less understood than the cathode.This review outlines the development of various types of anodes,including carbonbased,metallic and organic,which operate using different reaction mechanisms such as intercalation,alloying and conversion,and considers their challenges and prospects.Strategies for modifying their structures by doping and coating,and also modifying the solid electrolyte interface are discussed.In addition,this review also discusses the challenges encountered by the anode of SIBs and the solutions.展开更多
A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepar...A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, X-ray fluorescence （XRF） and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNil/3Mnl/3C01/302 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNii/3Mnl/3C01/302. The specific discharge capacity retention of the carbon-coated LiNi1/3Mnt/3Col/30z reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.展开更多
A process was proposed based on the combination of chemical and physical activation for the production of activated carbons used as the electrode material for electric double layer capacitor (EDLC). By material charac...A process was proposed based on the combination of chemical and physical activation for the production of activated carbons used as the electrode material for electric double layer capacitor (EDLC). By material characterization and electrochemical methods, the influences of the activitation process on the specific surface area, pore structure and electrochemical properties of the activated carbons were investigated. The results show that specific surface area, the mesopore volume, and the specific capacitance increase with the increase of the mass ratio of KOH to char (m(KOH)/m(char)) and the activation time, respectively. When m(KOH)/m(char) is 4.0, the specific surface area and the mesopore volume reach the maximum values, i.e. 1 960 m2/g and 0.308 4 cm3/g, and the specific capacitance is 120.7 F/g synchronously. Compared with the chemical activation, the activated carbons prepared by chemical-physical activation show a larger mesopore volume, a higher ratio of mesopore and a larger specific capacitance.展开更多
Activated carbon （AC） was fabricated by Coconut shell as carbon source, KOH as activator. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the sample...Activated carbon （AC） was fabricated by Coconut shell as carbon source, KOH as activator. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that： Supercapacitors based on the sample AC-3 have low Equivalent series resistanceb （ESR） and excellent power property.展开更多
Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur （Li-S） batteries. Herein, porous bamboo bi...Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur （Li-S） batteries. Herein, porous bamboo biochar is activated via a KOH/annealing process that creates a microporous structure, boosts surface area and enhances electronic conductivity. The treated sample is used to encapsulate sulfur to prepare a microporous bamboo carbon-sulfur （BC-S） nanocomposite for use as the cathode for Li-S batteries for the first time. The BC-S nanocomposite with 50 wt.% sulfur content delivers a high initial capacity of 1,295 mA-h/g at a low discharge rate of 160 mA/g and high capacity retention of 550 mA-h/g after 150 cycles at a high discharge rate of 800 mA/g with excellent coulombic efficiency （995%）. This suggests that the BC-S nanocomposite could be a promising cathode material for Li-S batteries.展开更多
Conversion-type anode materials hold great potential for Li+storage applications owing to their high specific capacity,while large volume expansion and poor electrical conductivity limit their rate and cycling perform...Conversion-type anode materials hold great potential for Li+storage applications owing to their high specific capacity,while large volume expansion and poor electrical conductivity limit their rate and cycling performances.Herein,a bimetal ZnMn-based metal-organic framework(ZnMn-MOF)is engineered for in situ conversion of MnO-encapsulated porous carbon(MnO/PC)composite.The templating and activation effects of coordinated Zn endow the converted PC matrix with a highly porous structure.This enhances the compatibility of PC matrix with MnO particles,resulting in the full encapsulation of MnO particles in the PC matrix.More significantly,the PC matrix provides enough void space to buffer the volume change,which fully wraps the MnO without crack or fracture during repeated cycling.As a result,MnO/PC shows high charge storage capability,extraordinary rate performance,and long-term cycling stability at the same time.Thus MnO/PC exhibits high delithiation capacities of 768mA h g^(-1)at 0.1Ag^(-1)and 487mA h g^(-1)at a high rate of 0.7Ag^(-1),combined with an unattenuated cycling performance after 500 cycles at 0.3Ag^(-1).More significantly,MnO/PC demonstrates a well-matched performance with the capacitive activated carbon electrode in a Li-ion capacitor(LIC)full cell.LIC demonstrates a high specific energy of 153.6W h kg^(-1)at 210W kg^(-1),combined with a specific energy of 71.8W h kg^(-1)at a high specific power of 63.0kW kg^(-1).展开更多
文摘Lithium-ion batteries(LIBs)are used in electric vehicles and portable smart devices,but lithium resources are dwindling and there is an increasing demand which has to be catered for.Sodium ion batteries(SIBs),which are less costly,are a promising replacement for LIBs because of the abundant natural reserves of sodium.The anode of a SIB is a necessary component of the battery but is less understood than the cathode.This review outlines the development of various types of anodes,including carbonbased,metallic and organic,which operate using different reaction mechanisms such as intercalation,alloying and conversion,and considers their challenges and prospects.Strategies for modifying their structures by doping and coating,and also modifying the solid electrolyte interface are discussed.In addition,this review also discusses the challenges encountered by the anode of SIBs and the solutions.
基金Project(U1202272)supported by the National Natural Science Foundation of China
文摘A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, X-ray fluorescence （XRF） and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNil/3Mnl/3C01/302 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNii/3Mnl/3C01/302. The specific discharge capacity retention of the carbon-coated LiNi1/3Mnt/3Col/30z reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.
基金Project(2007BAE12B01) supported by the National Key Technology Research and Development Program of China
文摘A process was proposed based on the combination of chemical and physical activation for the production of activated carbons used as the electrode material for electric double layer capacitor (EDLC). By material characterization and electrochemical methods, the influences of the activitation process on the specific surface area, pore structure and electrochemical properties of the activated carbons were investigated. The results show that specific surface area, the mesopore volume, and the specific capacitance increase with the increase of the mass ratio of KOH to char (m(KOH)/m(char)) and the activation time, respectively. When m(KOH)/m(char) is 4.0, the specific surface area and the mesopore volume reach the maximum values, i.e. 1 960 m2/g and 0.308 4 cm3/g, and the specific capacitance is 120.7 F/g synchronously. Compared with the chemical activation, the activated carbons prepared by chemical-physical activation show a larger mesopore volume, a higher ratio of mesopore and a larger specific capacitance.
文摘Activated carbon （AC） was fabricated by Coconut shell as carbon source, KOH as activator. Cyclic voltammetry and galvanostatic charge-discharge were used to characterize the electrochemical performance of the samples. The results showed that： Supercapacitors based on the sample AC-3 have low Equivalent series resistanceb （ESR） and excellent power property.
文摘Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur （Li-S） batteries. Herein, porous bamboo biochar is activated via a KOH/annealing process that creates a microporous structure, boosts surface area and enhances electronic conductivity. The treated sample is used to encapsulate sulfur to prepare a microporous bamboo carbon-sulfur （BC-S） nanocomposite for use as the cathode for Li-S batteries for the first time. The BC-S nanocomposite with 50 wt.% sulfur content delivers a high initial capacity of 1,295 mA-h/g at a low discharge rate of 160 mA/g and high capacity retention of 550 mA-h/g after 150 cycles at a high discharge rate of 800 mA/g with excellent coulombic efficiency （995%）. This suggests that the BC-S nanocomposite could be a promising cathode material for Li-S batteries.
基金supported by the National Natural Science Foundation of China(21905148)China Postdoctoral Science Foundation(2019T120567 and 2017M612184)+2 种基金the 1000-Talents Planthe World-Class Discipline Programthe Taishan Scholars Advantageous and Distinctive Discipline Program of Shandong province for supporting the research team of energy storage materials.
文摘Conversion-type anode materials hold great potential for Li+storage applications owing to their high specific capacity,while large volume expansion and poor electrical conductivity limit their rate and cycling performances.Herein,a bimetal ZnMn-based metal-organic framework(ZnMn-MOF)is engineered for in situ conversion of MnO-encapsulated porous carbon(MnO/PC)composite.The templating and activation effects of coordinated Zn endow the converted PC matrix with a highly porous structure.This enhances the compatibility of PC matrix with MnO particles,resulting in the full encapsulation of MnO particles in the PC matrix.More significantly,the PC matrix provides enough void space to buffer the volume change,which fully wraps the MnO without crack or fracture during repeated cycling.As a result,MnO/PC shows high charge storage capability,extraordinary rate performance,and long-term cycling stability at the same time.Thus MnO/PC exhibits high delithiation capacities of 768mA h g^(-1)at 0.1Ag^(-1)and 487mA h g^(-1)at a high rate of 0.7Ag^(-1),combined with an unattenuated cycling performance after 500 cycles at 0.3Ag^(-1).More significantly,MnO/PC demonstrates a well-matched performance with the capacitive activated carbon electrode in a Li-ion capacitor(LIC)full cell.LIC demonstrates a high specific energy of 153.6W h kg^(-1)at 210W kg^(-1),combined with a specific energy of 71.8W h kg^(-1)at a high specific power of 63.0kW kg^(-1).
