A novel approach was proposed to allocate spinning reserve for dynamic economic dispatch.The proposed approach set up a two-stage stochastic programming model to allocate reserve.The model was solved using a decompose...A novel approach was proposed to allocate spinning reserve for dynamic economic dispatch.The proposed approach set up a two-stage stochastic programming model to allocate reserve.The model was solved using a decomposed algorithm based on Benders' decomposition.The model and the algorithm were applied to a simple 3-node system and an actual 445-node system for verification,respectively.Test results show that the model can save 84.5 US $ cost for the testing three-node system,and the algorithm can solve the model for 445-node system within 5 min.The test results also illustrate that the proposed approach is efficient and suitable for large system calculation.展开更多
The modeling of PV （photovoltaic） systems is very crucial for embedded power system applications and maximum power point tracking. This paper presents a PV array model using Matlab/Simulink with the assistance of Si...The modeling of PV （photovoltaic） systems is very crucial for embedded power system applications and maximum power point tracking. This paper presents a PV array model using Matlab/Simulink with the assistance of SimPowerSystem toolbox. The PV cell is considered as the main building block for simulating and monitoring the PV array performance. The PV model has been developed and used as Simulink subsystems where the effect of solar insolation and PV array temperature on commercial PV modules have been studied throughout the simulated I-V and P-V output characteristics. The proposed model facilitates simulating the dynamic performance of PV-based power systems. The effect of different partial shading patterns of PV arrays under different configurations has been studied.展开更多
This paper discusses an implementation based on CMEX S-functions to model and to check implementation feasibility of two most commonly used Maximum Power Point Tracking （MPPT） algorithms, namely Hill Climbing/Pertu...This paper discusses an implementation based on CMEX S-functions to model and to check implementation feasibility of two most commonly used Maximum Power Point Tracking （MPPT） algorithms, namely Hill Climbing/Perturb ＆ Observe （P＆O） and Incremental Conductance. This study can also be generalized to encompass the whole digital techniques family, including artificial intelligence like Neural Network and Fuzzy Logic Control.展开更多
The reliability plays an important role in power electronic systems by which the number of system failures, repair costs, guarantee and etc. are estimated. In this paper first, a boost Maximum Power Point Tracker （M...The reliability plays an important role in power electronic systems by which the number of system failures, repair costs, guarantee and etc. are estimated. In this paper first, a boost Maximum Power Point Tracker （MPPT） converter is simulated in Discontinues Conduction Mode （DCM） and Continuous Conduction Mode （CCM） under different output power ratings. For these simulations, all of the inherent parameters of MOSFET and diodes are applied according to the actual types. Then, reliability calculation is done based on MIL-HDBK-217 handbook. Results have shown that the MPPT converter would have better performance from reliability point of view in CCM operating mode.展开更多
A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating p...A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating point）; namely, when the source impedance matches with the load impedance, a match which cannot be guaranteed spontaneously. Furthermore, the MPP （maximum power point） changes with temperature and light intensity variations. Therefore, different algorithms have been developed for finding MPPT （maximum power point tracking） based on offline and online methods. Evaluating the performance of these algorithms for various PV systems operating under highly dynamic environments are essentials to ensure producing reliable, efficient, cost-effective and high performance systems. One possible approach for system evaluation is to use computer simulation. This paper addresses the use of Matlab software as a simulation tool for evaluating the performance of PV solar systems and finding the MPPT.展开更多
It has been found that a triple-node feed-forward motif has a function of signal amplification, where two input nodes receive the external weak signal and jointly modulate the response of the third output node [Liang ...It has been found that a triple-node feed-forward motif has a function of signal amplification, where two input nodes receive the external weak signal and jointly modulate the response of the third output node [Liang et al.,Phys. Rev. E 88（2013） 012910]. We here show that the signal amplification can be further enhanced by adding a link between the two input nodes in the feed-forward motif. We further reveal that the coupling strength of the link regulates the enhancement of signal amplification in the modified feed-forward motif. We finally analyze the mechanism of signal amplification of such simple structure.展开更多
基金Projects(51007047,51077087)supported by the National Natural Science Foundation of ChinaProject(2013CB228205)supported by the National Key Basic Research Program of China+1 种基金Project(20100131120039)supported by Higher Learning Doctor Discipline End Scientific Research Fund of the Ministry of Education Institution,ChinaProject(ZR2010EQ035)supported by the Natural Science Foundation of Shandong Province,China
文摘A novel approach was proposed to allocate spinning reserve for dynamic economic dispatch.The proposed approach set up a two-stage stochastic programming model to allocate reserve.The model was solved using a decomposed algorithm based on Benders' decomposition.The model and the algorithm were applied to a simple 3-node system and an actual 445-node system for verification,respectively.Test results show that the model can save 84.5 US $ cost for the testing three-node system,and the algorithm can solve the model for 445-node system within 5 min.The test results also illustrate that the proposed approach is efficient and suitable for large system calculation.
文摘The modeling of PV （photovoltaic） systems is very crucial for embedded power system applications and maximum power point tracking. This paper presents a PV array model using Matlab/Simulink with the assistance of SimPowerSystem toolbox. The PV cell is considered as the main building block for simulating and monitoring the PV array performance. The PV model has been developed and used as Simulink subsystems where the effect of solar insolation and PV array temperature on commercial PV modules have been studied throughout the simulated I-V and P-V output characteristics. The proposed model facilitates simulating the dynamic performance of PV-based power systems. The effect of different partial shading patterns of PV arrays under different configurations has been studied.
文摘This paper discusses an implementation based on CMEX S-functions to model and to check implementation feasibility of two most commonly used Maximum Power Point Tracking （MPPT） algorithms, namely Hill Climbing/Perturb ＆ Observe （P＆O） and Incremental Conductance. This study can also be generalized to encompass the whole digital techniques family, including artificial intelligence like Neural Network and Fuzzy Logic Control.
文摘The reliability plays an important role in power electronic systems by which the number of system failures, repair costs, guarantee and etc. are estimated. In this paper first, a boost Maximum Power Point Tracker （MPPT） converter is simulated in Discontinues Conduction Mode （DCM） and Continuous Conduction Mode （CCM） under different output power ratings. For these simulations, all of the inherent parameters of MOSFET and diodes are applied according to the actual types. Then, reliability calculation is done based on MIL-HDBK-217 handbook. Results have shown that the MPPT converter would have better performance from reliability point of view in CCM operating mode.
文摘A PV （photovoltaic） solar panels exhibit non-linear current--voltage characteristics, and according to the MPT （maximum power transform） theory, it can produce maximum power at only one particular OP （operating point）; namely, when the source impedance matches with the load impedance, a match which cannot be guaranteed spontaneously. Furthermore, the MPP （maximum power point） changes with temperature and light intensity variations. Therefore, different algorithms have been developed for finding MPPT （maximum power point tracking） based on offline and online methods. Evaluating the performance of these algorithms for various PV systems operating under highly dynamic environments are essentials to ensure producing reliable, efficient, cost-effective and high performance systems. One possible approach for system evaluation is to use computer simulation. This paper addresses the use of Matlab software as a simulation tool for evaluating the performance of PV solar systems and finding the MPPT.
基金Supported by the Program for Professor of Special Appointment（Eastern Scholar） at Shanghai Institutions of Higher Learning under Grant No.QD2015016 the National Natural Science Foundation of China under Grant Nos.11505114 and 11305078
文摘It has been found that a triple-node feed-forward motif has a function of signal amplification, where two input nodes receive the external weak signal and jointly modulate the response of the third output node [Liang et al.,Phys. Rev. E 88（2013） 012910]. We here show that the signal amplification can be further enhanced by adding a link between the two input nodes in the feed-forward motif. We further reveal that the coupling strength of the link regulates the enhancement of signal amplification in the modified feed-forward motif. We finally analyze the mechanism of signal amplification of such simple structure.
