A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arse...A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arsenic in selected samples were evaluated. Arsenic contents in all input and output samples vary from 0.11% in raw lead to 6.66% in collected dust-2. More arsenic is volatilized in blast furnace and fuming furnace(73.02% of arsenic input) than bottom blowing furnace(10.29% of arsenic input).There are 78.97%, 13.69%, 7.31% of total arsenic distributed in intermediate materials, stockpiled materials and unorganized emissions, respectively. Matte slag-2, collected dust-1 and secondary zinc oxide are hazardous based on the arsenic concentrations of toxicity characteristic leaching procedure. According to risk assessment code(RAC) guideline, arsenic in collected dust-1 poses a very serious risk to the surrounding environment, arsenic in speiss, matte slag-2, water-quenched slag and secondary zinc oxide show low risk, while arsenic in matte slag-1, collected dust-2 and post dust has no risk to the environment.展开更多
The recovery of iron from iron sinking slag and lead smelter slag was investigated by desulfurization-reduction bath smelting. The effects of lead smelter slag(LSS) to iron sinking slag(ISS) mass ratio and temperature...The recovery of iron from iron sinking slag and lead smelter slag was investigated by desulfurization-reduction bath smelting. The effects of lead smelter slag(LSS) to iron sinking slag(ISS) mass ratio and temperature were investigated in desulfurization experiments. The X-ray diffraction(XRD) and X-ray fluorescence(XRF) analyses show that the optimum conditions are LSS:ISS of 3:7 and temperature of 1350°C. The composition of desulfurization products is mainly Zn Fe2O4, and the desulfurization rate of 99.66% is obtained under optimum conditions. The thermogravimetric(TG) and differential scanning calorimeter(DSC) analyses demonstrate that reductant is necessary for decomposition and reduction of zinc ferrite in desulfurization product. The effects of reductant, temperature and feeding modes on iron enrichment were investigated in reduction experiments. The scanning electron microscope(SEM) and energy dispersive spectrometer(EDS) determination show that the iron content of reduction product is up to 99.36% under optimum conditions of coke as reductant, reduction temperature of 1450°C and the feeding mode of premixing.展开更多
基金Project(2011AA061001)supported by the National High Technology Research and Development Program of ChinaProject(51304251)supported by the National Natural Science Foundation of China+1 种基金Project(2013M542141)supported by China Postdoctoral FoundationProject(K1201010-61)supported by Planned Program of Science and Technology of Changsha,China
文摘A field study was conducted to determine the behavior and distribution of arsenic during the pyrometallurgy process in a typical SKS(Shuikoushan) lead smelter in Hunan province, China. Environmental influences of arsenic in selected samples were evaluated. Arsenic contents in all input and output samples vary from 0.11% in raw lead to 6.66% in collected dust-2. More arsenic is volatilized in blast furnace and fuming furnace(73.02% of arsenic input) than bottom blowing furnace(10.29% of arsenic input).There are 78.97%, 13.69%, 7.31% of total arsenic distributed in intermediate materials, stockpiled materials and unorganized emissions, respectively. Matte slag-2, collected dust-1 and secondary zinc oxide are hazardous based on the arsenic concentrations of toxicity characteristic leaching procedure. According to risk assessment code(RAC) guideline, arsenic in collected dust-1 poses a very serious risk to the surrounding environment, arsenic in speiss, matte slag-2, water-quenched slag and secondary zinc oxide show low risk, while arsenic in matte slag-1, collected dust-2 and post dust has no risk to the environment.
基金Project(2011AA061003)supported by the National High Technology Research and Development Program of China
文摘The recovery of iron from iron sinking slag and lead smelter slag was investigated by desulfurization-reduction bath smelting. The effects of lead smelter slag(LSS) to iron sinking slag(ISS) mass ratio and temperature were investigated in desulfurization experiments. The X-ray diffraction(XRD) and X-ray fluorescence(XRF) analyses show that the optimum conditions are LSS:ISS of 3:7 and temperature of 1350°C. The composition of desulfurization products is mainly Zn Fe2O4, and the desulfurization rate of 99.66% is obtained under optimum conditions. The thermogravimetric(TG) and differential scanning calorimeter(DSC) analyses demonstrate that reductant is necessary for decomposition and reduction of zinc ferrite in desulfurization product. The effects of reductant, temperature and feeding modes on iron enrichment were investigated in reduction experiments. The scanning electron microscope(SEM) and energy dispersive spectrometer(EDS) determination show that the iron content of reduction product is up to 99.36% under optimum conditions of coke as reductant, reduction temperature of 1450°C and the feeding mode of premixing.
