Intermittent heating for drying of small diameter Larch lumbers is investigated experimentally. The lumbers were dried using an experimental drying schedule. Moisture content (MC) of the lumber was continuously record...Intermittent heating for drying of small diameter Larch lumbers is investigated experimentally. The lumbers were dried using an experimental drying schedule. Moisture content (MC) of the lumber was continuously recorded and final drying defects were examined. The drying curves showed that the drying rate was a constant in the early stage of intermittent heating drying and decreased evidently when the MC was about 18% (intermittent 2h) and 20% (intermittent 6h). The drying quality reached the second (intermittent 2h) and first grade (intermittent 6h) of the Chinese National Standard. The visual drying defects, especially the check extent along grains were reduced with intermittent heating. When the intermittent time increased, the effect was more obvious.展开更多
This study aimed to optimize the rapid test factors of dry basis weight of reconstituted tobacco, in order to afford a reference test method for companies which produce reconstituted tobacco to better control the basi...This study aimed to optimize the rapid test factors of dry basis weight of reconstituted tobacco, in order to afford a reference test method for companies which produce reconstituted tobacco to better control the basis weight and coating ratio on line. The dry basis weight of reconstituted tobacco was tested by fast method and normal oven method individually. And the effects on the test values of different test factors such as temperature, time and the number of baking sheets were studied. Then the test values of these two methods were compared, so the proper factors of rapid test method were determined. As the baking temperature rose from 130 ℃ to 150 ℃, and the baking time rose from 1 min to 2 min, the difference between fast test method and normal oven method grew, and when the number of baking pieces rose from 3 pieces to 5 pieces, the difference between the two methods went down. The optimum test condition was baking temperature of 130 ℃, baking time of 1 min, and baking sample sheet number of 5. Under this condition, the value of fast test method was the closest to the test value of normal oven method, and meanwhile, the test factor was more proper for testing on line. The study will provide a reference for online controlling of dry basis weight and coating ratio of reconstituted tobacco.展开更多
基金Sponsored by Huo Yingdong Fund(Grant No.81022) Sponsored by the Science and Technology Project Foundation of Harbin City( Grant No.2004AFX XJ021).
文摘Intermittent heating for drying of small diameter Larch lumbers is investigated experimentally. The lumbers were dried using an experimental drying schedule. Moisture content (MC) of the lumber was continuously recorded and final drying defects were examined. The drying curves showed that the drying rate was a constant in the early stage of intermittent heating drying and decreased evidently when the MC was about 18% (intermittent 2h) and 20% (intermittent 6h). The drying quality reached the second (intermittent 2h) and first grade (intermittent 6h) of the Chinese National Standard. The visual drying defects, especially the check extent along grains were reduced with intermittent heating. When the intermittent time increased, the effect was more obvious.
基金Supported by Science and Technology Planning Project of China Tobacco Schweitzer(Yunnan)Reconstituted Tobacco Co.,Ltd.(KY-17-ZL-01)China Tobacco Yunnan Industrial Co.,Ltd.(2016YL02)
文摘This study aimed to optimize the rapid test factors of dry basis weight of reconstituted tobacco, in order to afford a reference test method for companies which produce reconstituted tobacco to better control the basis weight and coating ratio on line. The dry basis weight of reconstituted tobacco was tested by fast method and normal oven method individually. And the effects on the test values of different test factors such as temperature, time and the number of baking sheets were studied. Then the test values of these two methods were compared, so the proper factors of rapid test method were determined. As the baking temperature rose from 130 ℃ to 150 ℃, and the baking time rose from 1 min to 2 min, the difference between fast test method and normal oven method grew, and when the number of baking pieces rose from 3 pieces to 5 pieces, the difference between the two methods went down. The optimum test condition was baking temperature of 130 ℃, baking time of 1 min, and baking sample sheet number of 5. Under this condition, the value of fast test method was the closest to the test value of normal oven method, and meanwhile, the test factor was more proper for testing on line. The study will provide a reference for online controlling of dry basis weight and coating ratio of reconstituted tobacco.
