Effects of Curing Techniques on Starch Contents of Leaves in Different Tobacco Parts with Varying Maturity Degrees

[Objective] The aim was to explore effects of different curing techniques on starch contents of tobaccos from different growth parts and with varying maturity degrees in order to reduce starch content of Yunnan tobacco. [Method] Compar- isons were conducted on tobaccos from upper, middle and down parts （immature, premature, mature and excessive mature） by low temperature and low humidity cur- ing technique, moderate temperature and moderate humidity curing technique, mod- erate temperature and high humidity curing technique to measure starch contents before and after curing. [Result] The results showed starch content of tobacco was increasing upon growth part. Low temperature and low humidity curing technique has poor effects on reduction of starch content; moderate temperature and moderate humidity curing technique improves starch content; moderate temperature and high humidity curing technique dramatically reduces starch content of tobaccos. [Conclu- sion] With consideration of tobacco appearance, inner quality and characters, moder- ate temperature and moderate humidity curing technique is recommended for tobac- co production.

Effects of Three Major Tobacco Curing Techniques on Raw Tobaccos

[Objective] The aim was to compare effects of three curing techniques （Chinese tobacco curing-method for improving tobacco quality and fragrance, Chi-nese （three-phase） tobacco curing technique, and Zimbabwe tobacco curing tech-nique） on quality of tobacco and to select optimal curing method. [Method] In Peng-shui county in Chongqing, tobacco variety K326 was chosen as test materials to conduct tobacco curing tests as per three techniques to analyze key components of raw tobacco, grade quality and evaluation quality. [Result] The content of starch in tobacco was reduced by Chinese tobacco curing-method for improving tobacco quality and fragrance, and the ratio of middle and high quality grade tobaccos improved by 1.8%-7.95%; average price increased by 1.64-3.21 yuan/kg; evaluation grade grew by 1.5-4.4. The technique is proved in enhancing tobacco fragrance quality and quantity as wel as improving and adjusting fragrance, taste and flavor. [Conclusion] Chinese （three-phase） tobacco curing technique improves tobacco quality and provides references for production demonstration areas of tobacco curing.

Effects of Different Baking Processes on Carotenoid Content in Upper Leaves of Fluecured Tobacco

[Objective] We aimed to improve the quality of flue-cured tobacco with K326 upper leaves and explore the optimal tobacco baking process in Chongqing tobacco-producing region. [Method] Four different baking processes （endogenetic force moisture-removing flue-curing technique, exogenetic force moisture-removing flue-curing technique, three-stage flue-curing process, three-stage and six-step flue- curing process） were adopted in this research to investigate the effects of different baking processes on carotenoid content of same-maturity degree upper leaves of the flue-cured tobacco K326. [Result] The results showed at the yellowing and color fixing stages, the carotenoids were most fully decomposed in endogenetic force moisture-removing flue-curing technique. The decomposed carotenoid content was lowest in exogenetic force moisture-removing flue-curing technique, for which the carotenoid content was highest （50.53 mg/g）. [Conclusion] At the yellowing and color fixing stages, exogenetic force moisture-removing flue-curing technique was most conducive to the carotenoid accumulation in tobacco baking process.

Study on Loading Leaves Density with Cage Clamp on Quality of Cured Tobaccos in Bulk-Curing Barn

In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .

Study on Curing Effect and the Waste Heat Recovering Equipment Design of Flue Gas of Bulk Curing Barn

In order to realize tobacco curing with energy saving and emission reduc- ing and lower cost, the waste heat recovering equipment was designed and built on blowing-upward type bulk curing barn. The comparative experiment of tobacco leaf curing was conducted between a bulk curing barn with waste heat of flue gas and conventional bulk curing barn. The results showed that the effect of saving coal in bulk curing barn with waste heat of flue gas was obvious than the contrast. The coal consumption quantity was 1.531 kg per kg of dry tobacco leaf. The saving coal in bulk curing barn with use waste heat of flue gas was 0.181 kg per kg of dry tobacco leaf than the contrast and saving coal rate was 10.57%. The electricity consumption quantity was 0.593 kWh per kg of dry tobacco leaf. The saving elec- tricity quantity in bulk curing barn with use waste heat of flue gas was 0.022 kWh/kg and the saving electricity rate was 3.58% than the contrast. The saving curing cost was 0.158 yuan per kg of dry tobacco leaf and saving cost rate 9.09% in bulk cur- ing barn with use waste heat of flue gas than the contrast. The appearance quality, grade structure and primary chemical composition had no significant difference be- tween bulk curing barn with use waste heat of flue gas and the contrast.

Feasibility analysis of using biomass gas or hydrogenin the tobacco curing system

To address the energy shortage and meet the requirements of environmental protection policies,the feasibility of premixed fuel 1(natural gas(NG),syngas,and hydrogen)and premixed fuel 2(NG and hydrogen)in the tobacco curing system was studied.First,according to the law of conservation of energy and mass,a tobacco leaf curing system model was established.Then,the interchangeability index of the premixed fuels was analyzed,and their volume ratios were obtained.Finally,a numerical simulation analysis of the premixed fuel combustion was conducted based on the indicators of emission,temperature,and economy.On this basis,the comprehensive performance indexes of the system composed of different premixed fuels were evaluated.The results obtained indicate that with the increase in the hydrogen volume ratio in premixed fuel 1,NO_(X) emissions will gradually increase.Moreover,with the increase in the hydrogen volume ratio in premixed fuel 2,CO emissions will gradually decrease.Because premixed fuel 2 contains more hydrogen than premixed fuel 1,CO emissions are reduced by 9.39%and 16.72%as compared with the NG system when the volume ratio of NG to hydrogen is 95∶5 and 90∶10,but the NO emissions of the latter are beyond the acceptable range.Finally,the overall performance is good when the volume ratio of NG to hydrogen is 95∶5,and the volume ratio of NG to syngas to hydrogen is 90∶5∶5.

Research on a Rapid Test Method of Dry Basis Weight of Paper-process Reconstituted Tobacco

This study aimed to optimize the rapid test factors of dry basis weight of reconstituted tobacco, in order to afford a reference test method for companies which produce reconstituted tobacco to better control the basis weight and coating ratio on line. The dry basis weight of reconstituted tobacco was tested by fast method and normal oven method individually. And the effects on the test values of different test factors such as temperature, time and the number of baking sheets were studied. Then the test values of these two methods were compared, so the proper factors of rapid test method were determined. As the baking temperature rose from 130 ℃ to 150 ℃, and the baking time rose from 1 min to 2 min, the difference between fast test method and normal oven method grew, and when the number of baking pieces rose from 3 pieces to 5 pieces, the difference between the two methods went down. The optimum test condition was baking temperature of 130 ℃, baking time of 1 min, and baking sample sheet number of 5. Under this condition, the value of fast test method was the closest to the test value of normal oven method, and meanwhile, the test factor was more proper for testing on line. The study will provide a reference for online controlling of dry basis weight and coating ratio of reconstituted tobacco.

Three-Stage Six-Step Flue-Curing Technology for Viginia Tobacco Leaves and Its Application in China

In order to overcome the problem that the leaf yellowing stage in tobacco curing reduces the fragrance of the product, this study introduced the principle and key parameters of a three-stage six-step curing technology. The field trail was conducted in Wulong county of Chongqing city in 2010, and Virginia K326 was the tested cultivar. The middle leaves were harvested and plaited after maturity, and then cured with the three-stage six-step curing technology and traditional three-stage curing technology, respectively. Three replicates were established for each of the two curing technologies. Then, chemical constituents, aromatic substances and smoking quality were analyzed. The results show that compared with the traditional three-stage curing technology, the three-stage six-step curing technology produces more suitable ratios of chemical constituents, higher aromatic component content and higher smoking quality grade of tobacco leaves. Therefore, the continuous improvement of corollary equipment and matching technologies is expected to widen the applications of the three-stage six-step curing technology in tobacco and provide a strong technical support for the development of the tobacco industry.

信息

区局认真学习贯彻全国烟草专卖局长公司总经理座谈会精神7月21日,区局(公司)召开党组扩大会,党组成员和机关处室主要负责人参加了会议,张长胜局长(总经理)主持会议,认真传达学习全国烟草专卖局长公司总经理座谈会精神。