[Objective] The aim was to establish a model based on spatial scene similarity, for which soil, slope, transport, water conservancy, light, social economic factors in suitable planting areas were all considered. A new...[Objective] The aim was to establish a model based on spatial scene similarity, for which soil, slope, transport, water conservancy, light, social economic factors in suitable planting areas were all considered. A new suitable planting area of flue-cured tobacco was determined by comparison and analysis, with consideration of excellent area. [Method] Totaling thirty natural factors were chosen, which were clas- sified into nine categories, from Longpeng Town （LP） and Shaochong Town （SC） in Shiping County in Honghe Hani and Yi Autonomous Prefecture. [Result] According to weights, the factors from high to low were as follows： soil〉light〉elevation〉slope〉 water conservancy〉transport〉baking facility〉planting plans over the years〉others. The similarity of geographical conditions in the area was 0.894 3, which indicated that the planting conditions in the two regions are similar. If farmer population in unit area, farmland quantity for individual farmer, labors in every household, activity in planting flue-cured tobacco and work of local instructor were considered, the weights of different factors were as follows： farmer population in unit area〉farmland quantity for individual farmer〉farmers＇ activity in planting flue-cured tobacco〉educational back- ground〉labor force in every household〉instructor〉population of farmers＇ children at- tending school. The similarity of geographical conditions was 0.703 1, which indicated that it is none-natural factors that influence yield and quality of flue-cured tobacco. [Conclusion] According to analysis on suitable planting area of flue-cured tobacco based on assessment of spatial scene similarity, similarity of growing conditions in two spatial scenes can be analyzed and evaluated, which would promote further exploration on, influencing factors and effects on tobacco production.展开更多
Small multi-turn coil devices are used with the transient electromagnetic method （TEM） in areas with limited space, particularly in underground environments such as coal mines roadways and engineering tunnels, and f...Small multi-turn coil devices are used with the transient electromagnetic method （TEM） in areas with limited space, particularly in underground environments such as coal mines roadways and engineering tunnels, and for detecting shallow geological targets in environmental and engineering fields. However, the equipment involved has strong mutual inductance coupling, which causes a lengthy turn-off time and a deep “blind zone”. This study proposes a new transmitter device with a conical-shape source and derives the radius formula of each coil and the mutual inductance coefficient of the cone. According to primary field characteristics, results of the two fields created, calculation of the conical-shaped source in a uniform medium using theoretical analysis, and a comparison of the inductance of the new device with that of the multi-turn coil, show that inductance of the multi-turn coil is nine times greater than that of the conical source with the same equivalent magnetic moment of 926.1 A·m2. This indicates that the new source leads to a much shallower “blind zone.” Furthermore, increasing the bottom radius and turn of the cone creates a larger mutual inductance but increasing the cone height results in a lower mutual inductance. Using the superposition principle, the primary and secondary magnetic fields for a conical source in a homogeneous medium are calculated; results indicate that the magnetic behavior of the cone is the same as that of the multi-turn coils, but the transient responses of the secondary field and the total field are more stronger than those of the multi-turn coils. To study the transient response characteristics using a cone-shaped source in a layered earth, a numerical filtering algorithm is then developed using the fast Hankel transform and the improved cosine transform, again using the superposition principle. During development, an average apparent resistivity inverted from the induced electromotive force using each coil is defined to represent the comprehensive resistivity of the conical source. To verify the forward calculation method, the transient responses of H type models and KH type models are calculated, and data are inverted using a “smoke ring” inversion. The results of inversion have good agreement with original models and show that the forward calculation method is effective. The results of this study provide an option for solving the problem of a deep “blind zone” and also provide a theoretical indicator for further research.展开更多
The uniform design method was adopted and the twenty-four groups of different geometric and physical pa-rameters were chosen. The finite element model was built. Comparisons between the simulation results and the test...The uniform design method was adopted and the twenty-four groups of different geometric and physical pa-rameters were chosen. The finite element model was built. Comparisons between the simulation results and the test re-sults prove that the simulation results are correct. The distribution of the temperature field of the chimney foundationwas analyzed. The multivariate linear regression of the hightest tomperature was performed on the inner wall of thechimney foundation by the numerical calculated results. The fitting property of the highest temperature with six influ-ence factors was obtained. A simple method for the calculation of the temperature field of the chimney foundation wasprovided.展开更多
Smoking is a worldwide problem. Research in recent years has shown us that smoking and second hand smoking can cause many diseases1. As a result of the understanding of the results of smoking, the house of legislator ...Smoking is a worldwide problem. Research in recent years has shown us that smoking and second hand smoking can cause many diseases1. As a result of the understanding of the results of smoking, the house of legislator in Israel decided to legislate a law that people under the age of 18 cannot smoke and, a couple of years later, it decided to ban smoking in public places. The problem begins when the law is affecting the person＇s autonomy and the person＇s culture. More than four decades ago when the smoking habit began in Israel, no one knew what the influence would be. Now, although that information is available, the orthodox community in Israel is not exposed to the knowledge. Smoking in this community begins from Purima or from the Bar-Mitzvah3 and from the will of the young orthodox to rebel. This law raises a question： Is it ethical to deprive the young orthodox of the right to smoke？ Alternatively, is there a better way to stop the orthodox from smoking than only the regulation？ In this paper, the author will try to show that regulation alone will not help in the orthodox community, and we need to think on more options to make the orthodox more informed to smoking problems. The author thinks that the best way will be to educate the orthodox community from young age.展开更多
3D Euler double-fluid model was applied and three different feedstocks and reverts formations were simulated. By calculating and analyzing the state of gas and solid fluxion in absorber using three different methods o...3D Euler double-fluid model was applied and three different feedstocks and reverts formations were simulated. By calculating and analyzing the state of gas and solid fluxion in absorber using three different methods of the feedstocks and reverts in recirculating fluidized bed, described the behavior of gas and solid through the gas-phase velocity, turbulence intensity, gas-solid sliding velocity, and density of particles. The results show that the feedstocks and reverts enters into absorption tower through two symmetrical feedings and are mixed with flue gas. Based on the respective analysis of each model and the com- parison analysis of the three models, this paper drew conclusions. The turbulence intensity of absorption tower is high, gas-solid sliding speed is big, and granule concentration near the axis is high, which has advantages for desulfurization and im- proving the utilization rate of absorbent.展开更多
文摘[Objective] The aim was to establish a model based on spatial scene similarity, for which soil, slope, transport, water conservancy, light, social economic factors in suitable planting areas were all considered. A new suitable planting area of flue-cured tobacco was determined by comparison and analysis, with consideration of excellent area. [Method] Totaling thirty natural factors were chosen, which were clas- sified into nine categories, from Longpeng Town （LP） and Shaochong Town （SC） in Shiping County in Honghe Hani and Yi Autonomous Prefecture. [Result] According to weights, the factors from high to low were as follows： soil〉light〉elevation〉slope〉 water conservancy〉transport〉baking facility〉planting plans over the years〉others. The similarity of geographical conditions in the area was 0.894 3, which indicated that the planting conditions in the two regions are similar. If farmer population in unit area, farmland quantity for individual farmer, labors in every household, activity in planting flue-cured tobacco and work of local instructor were considered, the weights of different factors were as follows： farmer population in unit area〉farmland quantity for individual farmer〉farmers＇ activity in planting flue-cured tobacco〉educational back- ground〉labor force in every household〉instructor〉population of farmers＇ children at- tending school. The similarity of geographical conditions was 0.703 1, which indicated that it is none-natural factors that influence yield and quality of flue-cured tobacco. [Conclusion] According to analysis on suitable planting area of flue-cured tobacco based on assessment of spatial scene similarity, similarity of growing conditions in two spatial scenes can be analyzed and evaluated, which would promote further exploration on, influencing factors and effects on tobacco production.
基金supported by the National Natural Science Foundation of China(Nos.41564001 and 41572185)the Natural Science Foundation of Jiangxi Province(No.20151BAB203045)
文摘Small multi-turn coil devices are used with the transient electromagnetic method （TEM） in areas with limited space, particularly in underground environments such as coal mines roadways and engineering tunnels, and for detecting shallow geological targets in environmental and engineering fields. However, the equipment involved has strong mutual inductance coupling, which causes a lengthy turn-off time and a deep “blind zone”. This study proposes a new transmitter device with a conical-shape source and derives the radius formula of each coil and the mutual inductance coefficient of the cone. According to primary field characteristics, results of the two fields created, calculation of the conical-shaped source in a uniform medium using theoretical analysis, and a comparison of the inductance of the new device with that of the multi-turn coil, show that inductance of the multi-turn coil is nine times greater than that of the conical source with the same equivalent magnetic moment of 926.1 A·m2. This indicates that the new source leads to a much shallower “blind zone.” Furthermore, increasing the bottom radius and turn of the cone creates a larger mutual inductance but increasing the cone height results in a lower mutual inductance. Using the superposition principle, the primary and secondary magnetic fields for a conical source in a homogeneous medium are calculated; results indicate that the magnetic behavior of the cone is the same as that of the multi-turn coils, but the transient responses of the secondary field and the total field are more stronger than those of the multi-turn coils. To study the transient response characteristics using a cone-shaped source in a layered earth, a numerical filtering algorithm is then developed using the fast Hankel transform and the improved cosine transform, again using the superposition principle. During development, an average apparent resistivity inverted from the induced electromotive force using each coil is defined to represent the comprehensive resistivity of the conical source. To verify the forward calculation method, the transient responses of H type models and KH type models are calculated, and data are inverted using a “smoke ring” inversion. The results of inversion have good agreement with original models and show that the forward calculation method is effective. The results of this study provide an option for solving the problem of a deep “blind zone” and also provide a theoretical indicator for further research.
文摘The uniform design method was adopted and the twenty-four groups of different geometric and physical pa-rameters were chosen. The finite element model was built. Comparisons between the simulation results and the test re-sults prove that the simulation results are correct. The distribution of the temperature field of the chimney foundationwas analyzed. The multivariate linear regression of the hightest tomperature was performed on the inner wall of thechimney foundation by the numerical calculated results. The fitting property of the highest temperature with six influ-ence factors was obtained. A simple method for the calculation of the temperature field of the chimney foundation wasprovided.
文摘Smoking is a worldwide problem. Research in recent years has shown us that smoking and second hand smoking can cause many diseases1. As a result of the understanding of the results of smoking, the house of legislator in Israel decided to legislate a law that people under the age of 18 cannot smoke and, a couple of years later, it decided to ban smoking in public places. The problem begins when the law is affecting the person＇s autonomy and the person＇s culture. More than four decades ago when the smoking habit began in Israel, no one knew what the influence would be. Now, although that information is available, the orthodox community in Israel is not exposed to the knowledge. Smoking in this community begins from Purima or from the Bar-Mitzvah3 and from the will of the young orthodox to rebel. This law raises a question： Is it ethical to deprive the young orthodox of the right to smoke？ Alternatively, is there a better way to stop the orthodox from smoking than only the regulation？ In this paper, the author will try to show that regulation alone will not help in the orthodox community, and we need to think on more options to make the orthodox more informed to smoking problems. The author thinks that the best way will be to educate the orthodox community from young age.
文摘3D Euler double-fluid model was applied and three different feedstocks and reverts formations were simulated. By calculating and analyzing the state of gas and solid fluxion in absorber using three different methods of the feedstocks and reverts in recirculating fluidized bed, described the behavior of gas and solid through the gas-phase velocity, turbulence intensity, gas-solid sliding velocity, and density of particles. The results show that the feedstocks and reverts enters into absorption tower through two symmetrical feedings and are mixed with flue gas. Based on the respective analysis of each model and the com- parison analysis of the three models, this paper drew conclusions. The turbulence intensity of absorption tower is high, gas-solid sliding speed is big, and granule concentration near the axis is high, which has advantages for desulfurization and im- proving the utilization rate of absorbent.
