In order to provide guideline for choosing a suitable tube-wall thickness(d)for the micro-jet methane diffusion flame,the effect of tube-wall thickness on the blow-off limit is investigated via numerical simulation in...In order to provide guideline for choosing a suitable tube-wall thickness(d)for the micro-jet methane diffusion flame,the effect of tube-wall thickness on the blow-off limit is investigated via numerical simulation in the present work.The results show that the blow-off limit of micro-jet methane diffusion flame firstly increases and then decreases with the increase of tube-wall thickness.Subsequently,the underlying mechanisms responsible for the above non-monotonic blow-off limit are discussed in terms of the flow filed,strain effect and conjugate heat exchange.The analysis indicates that the flow field is insignificant for the non-monotonic blow-off limit.A smaller strain effect can induce the increase of the blow-off limit fromd=0.1 to 0.2 mm,and a worse heat recirculation effect can induce the decrease of the blow-off limit fromd=0.2 to 0.4 mm.The non-monotonic blow-off limit is mainly determined by the heat loss of flame to the tube-wall and the performance of tube-wall on preheating unburned fuel.The smallest heat loss of flame to the tube-wall and the best performance of tube-wall on preheating unburned fuel result in the largest blow-off limit atd=0.2 mm.Therefore,a moderate tube-wall thickness is more suitable to manufacture the micro-jet burner.展开更多
In this work thermal conduction in one-dimensional （1D） chains of anharmonic oscillators are studied using computer simulation. The temperature profile, heat flux and thermal conductivity are investigated for chain ...In this work thermal conduction in one-dimensional （1D） chains of anharmonic oscillators are studied using computer simulation. The temperature profile, heat flux and thermal conductivity are investigated for chain length N = 100, 200, 400, 800 and 1600. In the computer simulation anharmonicity is introduced due to Fermi-Pasta- U1am-β （FPU-β） model For substrate interaction, an onsite potential due to Frenkel-Kontorova （FK） model has been used. Numerical simulations demonstrate that temperature gradient scales behave as N-1 linearly with the relation J = 0.1765/N. For the thermal conductivity K, KN to N obey the linear relation of the type KN = 0.8805N. It is shown that thermal transport is dependent on phonon-phonon interaction as web as phonon-lattice interaction. The thermal conductivity increases linearly with increase inanharmonicity and predicts relation κ =0.133 ＋ 0.804β. It is also concluded that for higher value of the strength of the onsite potential system tends to a thermal insulator.展开更多
基金Project(51876074)supported by the National Natural Science Foundation of China。
文摘In order to provide guideline for choosing a suitable tube-wall thickness(d)for the micro-jet methane diffusion flame,the effect of tube-wall thickness on the blow-off limit is investigated via numerical simulation in the present work.The results show that the blow-off limit of micro-jet methane diffusion flame firstly increases and then decreases with the increase of tube-wall thickness.Subsequently,the underlying mechanisms responsible for the above non-monotonic blow-off limit are discussed in terms of the flow filed,strain effect and conjugate heat exchange.The analysis indicates that the flow field is insignificant for the non-monotonic blow-off limit.A smaller strain effect can induce the increase of the blow-off limit fromd=0.1 to 0.2 mm,and a worse heat recirculation effect can induce the decrease of the blow-off limit fromd=0.2 to 0.4 mm.The non-monotonic blow-off limit is mainly determined by the heat loss of flame to the tube-wall and the performance of tube-wall on preheating unburned fuel.The smallest heat loss of flame to the tube-wall and the best performance of tube-wall on preheating unburned fuel result in the largest blow-off limit atd=0.2 mm.Therefore,a moderate tube-wall thickness is more suitable to manufacture the micro-jet burner.
文摘In this work thermal conduction in one-dimensional （1D） chains of anharmonic oscillators are studied using computer simulation. The temperature profile, heat flux and thermal conductivity are investigated for chain length N = 100, 200, 400, 800 and 1600. In the computer simulation anharmonicity is introduced due to Fermi-Pasta- U1am-β （FPU-β） model For substrate interaction, an onsite potential due to Frenkel-Kontorova （FK） model has been used. Numerical simulations demonstrate that temperature gradient scales behave as N-1 linearly with the relation J = 0.1765/N. For the thermal conductivity K, KN to N obey the linear relation of the type KN = 0.8805N. It is shown that thermal transport is dependent on phonon-phonon interaction as web as phonon-lattice interaction. The thermal conductivity increases linearly with increase inanharmonicity and predicts relation κ =0.133 ＋ 0.804β. It is also concluded that for higher value of the strength of the onsite potential system tends to a thermal insulator.
