Hydrogen fuel cell cars are now available for lease and for sale. Renewable hydrogen fuel can be produced from water via electrolysis, or from biomass via gasification. Electrolysis is power-hungry with high demand fr...Hydrogen fuel cell cars are now available for lease and for sale. Renewable hydrogen fuel can be produced from water via electrolysis, or from biomass via gasification. Electrolysis is power-hungry with high demand from solar or wind power. Gasification, however, can be energy self-sufficient using a recently-patented thermochemical conversion technology known as I-HPG （indirectly-heated pyrolytic gasification）. I-HPG produces a tar-free syngas from non-food woody biomass. This means the balance of plant can be small, so the overall system is economical at modest sizes. This makes it possible to produce renewable hydrogen from local agricultural residues; sufficient to create distributed refueling stations wherever there is feedstock. This work describes the specifics of a novel bio-hydrogen refueling station whereby the syngas produced has much of the hydrogen extracted with the remainder powering a generator to provide the electric power to the I-HPG system. Thus the system runs continuously. When paired with another new technology, moderate-pressure storage of hydrogen in porous silicon, there is the potential to also power the refueling operation. Such systems can be operated independently. It is even possible to design an energy self-sufficient farm where all electric power, heat, and hydrogen fuel is produced from the non-food residues of agricultural operations. No water is required, and the carbon footprint is negative, or at least neutral.展开更多
The bio-limited forming technology, a new technology organically integrating microbiology, manufacturing science and materials science, is used in the manufacturing of magnetic or conductive microstructures of differe...The bio-limited forming technology, a new technology organically integrating microbiology, manufacturing science and materials science, is used in the manufacturing of magnetic or conductive microstructures of different standard shapes. This paper explores the feasibility of magnetizing microorganism with thermal decomposition method. The principle of thermal decomposition of iron pentacarbonyl has been adopted to investigate the cells of Spirulina (a type of nature micro-helical microorganism) coated with pure iron. Further analysis have been conducted on the observations results of hollow micro-helical magnetic particles form, components and the phase structure obtained by using various tools including optical microscopy, scanning electron microscopy (SEM), energy dispersive X-ray detector (EDX), transmission electron microscopy (TEM), and X-ray diffraction analysis (XRD). Results showed that Spirulina cells could be coated with iron particles after the completion of thermal decomposition process, with well-kept shape of natural helixes and consistent components of different sampling points on the surface layer and thickness of layer. After the heat treatment at 700°C, the type of the surface iron layer formed was α-Fe. The paper also investigates the kinetics of the cell magnetization technology by thermal decomposition.展开更多
With the self-made pyrolysis equipment in miniature, we experimented in different pyrolysis conditions to get different pyrolyzate yields ( carbon, vinegar and gas). It proved that with the rise of temperature, the av...With the self-made pyrolysis equipment in miniature, we experimented in different pyrolysis conditions to get different pyrolyzate yields ( carbon, vinegar and gas). It proved that with the rise of temperature, the average yield of carbon descends gradually while the yields of vinegar and gas rise gradually. As the temperature rises, the yield of gas increases much more than that of vinegar. When speeding up the rising temperature, yield of carbon goes down while yields of vinegar and gas go up.展开更多
文摘Hydrogen fuel cell cars are now available for lease and for sale. Renewable hydrogen fuel can be produced from water via electrolysis, or from biomass via gasification. Electrolysis is power-hungry with high demand from solar or wind power. Gasification, however, can be energy self-sufficient using a recently-patented thermochemical conversion technology known as I-HPG （indirectly-heated pyrolytic gasification）. I-HPG produces a tar-free syngas from non-food woody biomass. This means the balance of plant can be small, so the overall system is economical at modest sizes. This makes it possible to produce renewable hydrogen from local agricultural residues; sufficient to create distributed refueling stations wherever there is feedstock. This work describes the specifics of a novel bio-hydrogen refueling station whereby the syngas produced has much of the hydrogen extracted with the remainder powering a generator to provide the electric power to the I-HPG system. Thus the system runs continuously. When paired with another new technology, moderate-pressure storage of hydrogen in porous silicon, there is the potential to also power the refueling operation. Such systems can be operated independently. It is even possible to design an energy self-sufficient farm where all electric power, heat, and hydrogen fuel is produced from the non-food residues of agricultural operations. No water is required, and the carbon footprint is negative, or at least neutral.
基金supported by the Foundation for the Author of National Excellent Doctoral Dissertation of PR China (Grant No. 2007B32)the National High Technology Research and Development Program of China (Grant No. 2009AA043804)
文摘The bio-limited forming technology, a new technology organically integrating microbiology, manufacturing science and materials science, is used in the manufacturing of magnetic or conductive microstructures of different standard shapes. This paper explores the feasibility of magnetizing microorganism with thermal decomposition method. The principle of thermal decomposition of iron pentacarbonyl has been adopted to investigate the cells of Spirulina (a type of nature micro-helical microorganism) coated with pure iron. Further analysis have been conducted on the observations results of hollow micro-helical magnetic particles form, components and the phase structure obtained by using various tools including optical microscopy, scanning electron microscopy (SEM), energy dispersive X-ray detector (EDX), transmission electron microscopy (TEM), and X-ray diffraction analysis (XRD). Results showed that Spirulina cells could be coated with iron particles after the completion of thermal decomposition process, with well-kept shape of natural helixes and consistent components of different sampling points on the surface layer and thickness of layer. After the heat treatment at 700°C, the type of the surface iron layer formed was α-Fe. The paper also investigates the kinetics of the cell magnetization technology by thermal decomposition.
文摘With the self-made pyrolysis equipment in miniature, we experimented in different pyrolysis conditions to get different pyrolyzate yields ( carbon, vinegar and gas). It proved that with the rise of temperature, the average yield of carbon descends gradually while the yields of vinegar and gas rise gradually. As the temperature rises, the yield of gas increases much more than that of vinegar. When speeding up the rising temperature, yield of carbon goes down while yields of vinegar and gas go up.
