甲醛环二过氧化物热分解反应的量子化学研究

AMl方法研究甲醛环二过氧化物的热分解反应,结果表明反应可循两条进行,路径(Ⅱ)要易进行些．

考虑水化热影响的混凝土坝位移监测统计分析模型及其解析

为量化水化热对混凝土坝位移的影响,在混凝土坝位移统计模型的基础上,提出了水化热分量形式。结合混凝土坝的位移、上游水位和坝体温度监测数据,采用改进的偏最小二乘法建立混凝土坝的位移统计模型,从实测位移数据中分离出温度引起的位移分量,然后以周期项作为环境温度分量的表达式,利用一维热传导方程的简化近似解来构建水化热分量的表达式,拟合温度位移分量,实现水化热对混凝土坝位移的量化影响分析。工程实例计算表明,偏最小二乘回归模型能有效克服各类因子变量间的多重共线性对模型拟合精度的影响,提出的水化热分量表达式具有适用性,残余水化热引起的混凝土坝位移不容忽视。

固体材料低温比热测量技术综述

材料低温比热测量对新材料研究和应用具有重要意义,低温比热测量是低温物理研究领域最活跃的研究方向之一。对低温比热测量研究历史作了简单的介绍,对各种低温比热测量方法的原理、应用、发展进行了较全面的综述分析,对超低温、强磁场、放射性样品等特殊情况下比热测量作了讨论。

Apparent activation energy for spontaneous combustion of sulfide concentrates in storage yard

In order to evaluate the spontaneous combustion hazard of sulfide concentrates in storage, three different kinds of sulfide concentrates （sulfur-rich sulfide concentrate, iron sulfide concentrate and copper sulfide concentrate） were obtained from a storage yard in Dongguashan Copper Mine, China. The reaction processes at different heating rates of 5, 10, 15, 20, and 25 ℃/min in air flow from ambient temperature to 1 000 ℃ were studied by TG-DTG-DSC analysis. By the peak temperatures of DTG curves, the whole reaction process for each sample was divided into different stages, and the corresponding apparent activation energies were calculated by the Ozawa-Flynn-Wall method. It is found that the reaction process of each sample is considerably complex; the apparent activation energy values change from 36 to 160 kJ/mol in different temperature ranges; sulfur-rich sulfide and iron sulfide concentrates have lower apparent activation energy than copper sulfide concentrate below 150 ℃; so they are more inclined to cause spontaneous combustion at ambient temperature.

Improved spatial resolution in soil moisture retrieval at arid mining area using apparent thermal inertia

A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean surface temperature from MODIS images to improve the spatial resolution of soil temperature difference based on the heat conduction equation,which is necessary to calculate the ATI.Consequently,the spatial resolution of ATI and SMC can be enhanced from 1 km to 120 m（TM） or 60m（ETM＋）.Moreover,the enhanced ATI has a much stronger correlation coefficient（R^2） with SMC（0.789） than the surface reflectance（0.108） or the ATI derived only from MODIS images（0.264）.Based on the regression statistics of the field SMC measurement and enhanced ATI,a linear regression model with an RMS error of 1.90%was found.

甜椒CaHSP22.5基因的克隆及序列分析

为深入研究小分子量热激蛋白对植物胁迫条件下的保护机理,利用RT-PCR结合RACE的方法,克隆甜椒内质网小分子量热激蛋白基因(CaHSP22.5)基因并进行序列分析和转基因烟草分析.获得了包括全长开放读码框(ORF)的CaHSP22.5基因的cDNA序列,与目前已克隆的ERsHSP类基因的同源性分析表明,甜椒CaHSP22.5基因编码的蛋白与马铃薯和番茄的ERsHSP类蛋白的同源性最高.通过叶盘法利用农杆菌介导转化烟草,成功获得了正反义转基因烟草,为进一步研究该基因的功能和作用机制奠定了基础.

Double-diffusive Fluxes of Salt and Heat in the Upper Layer of North Pacific Intermediate Water

Almost half of the oceanic water columns exhibit double-diffusion. The importance of double-diffusion in global oceans’ salt and heat fluxes, water-mass formation and mixing, and circulation is increasingly recognized. However, such an important physical process in the ocean has not been well studied. One of the reasons is the difficulty of parameterizing and quantifying the processes. The paper presented here attempts to quantify the double-diffusive fluxes of salt and heat in the ocean. Previous qualitative analysis by applying the water-mass Turner angle, mTu, to the North Pacific Intermediate Water (NPIW) layer showed a favorable condition for salt-fingering in the upper NPIW due to the overlying warm/salty water above the cold/fresh NPIW core, and a doubly-stable condition in the lower NPIW where potential temperature decreases with depth while salinity increases, inducing double stratification with respect to both potential temperature and salinity. The present study gives a quantitative estimate of double-diffusive fluxes of salt and heat contributed by salt-fingering in the upper NPIW layer.

Thermal Dehydration Kinetics of Gypsum and Borogypsum under Non-isothermal Conditions

Thermal dehydration of gypsum and borogypsum was investigated under nonisothermal conditions in air by using simultaneous thermogravimetric-differential thermal analyzer. Nonisothermal experiments were carried out at various linear heating rates. Kinetics of dehydration in the temperature range of 373-503 K were evaluated from the DTA (differential thermal analysis)-TGA (thermogravimetric analysis) data by means of Coats-Redfern,Kissinger and Doyle Equations. Values of the activation energy and the pre-exponential factor of the dehydration were calculated. The results of thermal experiments and kinetic parameters indicated that borogypsum is similar to gypsum from dehydration mechanism point of view although it consists of boron and small amount of alkali metal oxides.

Thermo-analysis of Preparation Processfor Electron Trapping Materials

The heated process of raw materials for electron trapping materials (ETM) is investigated by thermo-analysis method. The temperature ranges of raw materials experienced some physical and chemical change processes, such as dehydration, organic solvent removal, crystal sulphur burning, oxidation of alkaline earth sulfides and solid phase reaction (rare earth doped) and so on, are obtained. The experimental results also show that the presence of trace oxygen in shielded gas is very harmful to prepare the ETM.The raw material thermo-analysis results provide very important experimental reference for optimizing the ETM preparation techniques.

Investigation of floor heating with thermal storage

Based on experimental data, the energy storage performances of floor radiant heating system were investigated. The decrease of indoor air temperature after the stopping of floor heating was compared with that of fan-coil heating system. The increase of indoor air temperature after the stopping of floor cooling system was analyzed. The results show that the floor heating system has good thermal storage performance, which can be used to a night-running model to obtain the energy-saving benefits efficient and economic running cost, and still can be used for “shifting peak load to off-peak” macroscopically.

Experimental Research on Flow Maldistribution in Plate-Fin Heat Exchangers

The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is found that the flow maldistribution is serious because of the defects of inlet configurations, while the inlet configuration and Reynolds number are the main factors affecting the flow distribution. The improved inlet configurations, which are the header with a two-stage distributing configuration and the guide vane with a fluid complementary cavity were proposed and tested in this paper. The experimental results show that the improved inlet configurations can effectively improve the performance of flow distribution in heat exchangers.

Heat Generation by Electric Current in Normal-Metal-Molecular Quantum Dot-Superconductor System

We investigate the heat generation induced by electrical current in a normal-metal-molecular quantum dot-superconductor （NDS） system. By using nonequilibrium Green＇s function method, the heat generation Q is derived and studied in detail. The superconducting lead influences the heat generation significantly. An obvious step appears in Q - eV characteristics and the iocation of this step is related with the phonon frequency ωo. The heat generations exhibit very different behaviour in the condition eV 〈 △ and eV 〉 △ due to different tunneling mechanism. From the study of Q - eVg curves, there is an extra peak as eV 〉 △. The difference in this two cases is also shown in Q - ωo curve, an extra peak emerges as eV 〉 △.

Study on the thermal decomposition kinetics of nano-sized calcium carbonate

This study of the thermal decomposition kinetics of various average diameter nano-particles of cal-cium carbonate by means of TG-DTA(thermogravimetry and differential thermal analysis) showed that the thermal decomposition kinetic mechanisms of the same crystal type of calcium carbonate samples do not vary with decreasing of their average diameters ; their pseudo-active energy Ea; and that the top-temperature of decom-position Tp decreases gently in the scope of micron-sized diameter, but decreases sharply when the average di-ameter decreases from micron region to nanometer region. The extraordinary properties of nano-particles were explored by comparing the varying regularity of the mechanisms and kinetic parameters of the solid-phase reac-tions as well as their structural characterization with the variation of average diameters of particles. These show that the aggregation, surface effect as well as internal aberrance and stress of the nano-particles are the main reason causing both Ea and Tp to decline sharply with the decrease of the average diameter of nano-particles.

Temperature Distribution in Ethylene Pyrolyzer

A good understanding of the detailed temperature distribution in the furnace plays an important role in the implementation of operation optimization and design improvement of ethylene pyrolyzer. Numerical simulation of the turbulent flow, combustion and heat transfer was carried out to investigate the temperature distribution in industrial furnace. Inhomogeneities of the flue-gas temperature distribution were observed in X, Y, and Z direction of the furnace from the simulated results. Along the height of the furnace, the average flue-gas temperature increased initially and decreased afterward, and reached its peak at the height of 5 m. The reactor tube skin temperature varied not only along the height of the furnace, but also around the circumference of the tube. The heat flux profiles from the furnace towards the reactor tubes followed the shape of the average flue-gas temperature profile. The heat flux of the inlet tubes was constantly higher than that of the outlet tubes at the same height in the furnace.

Formation and Characteristics of Acrylonitrile/Urea Inclusion Compound

The formation process and composition of the acrylonitrile/urea inclusion compounds （AN/UIC） with different aging times and AN/urea molar feed ratios are studied by differential scanning calorimetry （DSC） and X-ray diffraction （XRD）. It is suggested that DSC can determine the guest/host ratio and the heat of decomposition. Meanwhile, the guest/host ratio and heat of decomposition are obtained, which are 1.17 and 5361.53 J/mol, respec- tively. It is suggested AN molecules included in urea canal lattice may be packed flat against each other. It is found that the formation of AN/UIC depends on the aging time. XRD results reveal that once AN molecules enter urea lattice, AN/UIC are formed, which possess the final structure. When AN molecules are sufficient, the length of AN molecular arrays in urea canals increases as aging time prolonging until urea tunnels are saturated by AN.

Measurement and engineering application of adsorbed water content in fine-grained soils

In this paper,the content and density of adsorbed water in fine-grained soil are determined.According to the test results,the calculation method of compaction degree of the solid-phase and void ration of soil is improved.Four kinds of fine-grained soils from different regions in China were selected,and the adsorbed water content and density of four kinds of fine-grained soils were determined by thermogravimetry and volumetric flask method.Furthermore,SEM and XRD experiments were used to analyze the differences in the ability of each soil sample to absorb water.In order to study the compression characteristics of adsorbed water,four saturated soil samples were tested by consolidation method.The results show that the desorption temperature range of the adsorbed water and its density were equal to 100−115℃and 1.30 g/cm^(3),respectively.Adsorbed water plays a positive role in keeping the compressibility of fine-grained soil at a low rate when it has high water content.Besides,adsorbed water can be a stable parameter and is difficult to discharge during the operation period of subgrade.The settlement of fine-grained soil embankment is predicted by engineering example,and compared with the result of conventional calculation method.The results show that it is more close to the field monitoring results by using the improved void ratio of soil as the parameter.

Thermogravimetric Study and Modeling of Direct Sulfation of Limestone by Sulfur Dioxide

The direct sulfation of limestone from different sources in Iran was studiedin a thermogravimetric analyzer under atmospheric pressure. All limestone samples tested have higherthan 97% CaCO_3. Experimental conditions were as follows: particle size levels ranging from 1.6 μmto 7.8 μm, four level reaction temperatures (700℃, 750℃, 800℃ and 850℃), and two SO_2concentrations (2.4 x 10^(-3) and 3.2 x 10^(-3) mol · mol^(-1)). The particle size and temperatureshowed dominant influences on the rate and level of conversion while the effect of SO_2concentration was weak. The shrinking core model can be used to describe the behavior of thesulfation process. The reaction kinetics and diffusion mechanism are both important in controllingthe rate of the process. The two key parameters of the model, chemical rate constant K_s andeffective diffusion coefficient D_(eff) were obtained. Model predictions are in good agreement withthe experimental data.

Preparation of Phase Change Microcapsule and Its Plication in Textiles

Phase change microcapsules(PCMs)are prepared with n-hexadecane and n-octadecane as core material,and melamine-formaldehyde resin is used as shell material by in-situ polymerization.Differential scanning calorimetry(DSC)was used to analyze the phase change properties.Thermal conductivity and maximum heat flux of cotton fabric finished with PCMs before and after being washed were also measured.It has been found that melting and crystal enthalpy of the PCMs decrease with decreasing the core/shell ratio,while qmax of fabric treated with PCMs decreases and the thermal conductivity increases.Study shows that fabric finished by the PCMs has good temperature conditioning function.

Thermal Analysis of InAlAs/InGaAs/InP Mid-infrared QCLs Operating in CW Mode

A simulation method for the thermal analysis of InAlAs/InGaAs/InP mid-infrared quantum cascade lasers (QCLs) based on finite-element method (FEM) is presented. The thermal distribution of the QCLs on substrate-side or epilayer-side mounting forms is simulated and the results are compared. Results show that the epilayer-side mounting form has much better heat dissipation capability than the substrate-side mounting.

Reduction of lead sulfate to lead sulfide with carbon monoxide

In order to decrease the solubility of PbSO4 and enhance lead recovery from PbSO4 bearing wastes, CO was employed as a reductant to transform PbSO4 into Pb S. Reaction system was established and reductive thermodynamics of PbSO4 was calculated by software HSC 5.0. The effects of gas concentration, reaction temperature, time and mass of sample on reduction of PbSO4 were examined by thermogravimetry(TG) and XRD. Roasting tests further verify the conclusions of thermodynamic and TG analyses. The results show that increasing temperature in the reasonable range and CO content are favorable for the formation of Pb S. The reduction process is controlled by chemical reaction and calculation value of the activation energy is 47.88 k J/mol.