Compared to potential temperature （θ） in the dry atmosphere and equivalent potential temperature （θc） in the saturated atmosphere, generalized potential tem- perature （θ＂） has already proven a better thermod...Compared to potential temperature （θ） in the dry atmosphere and equivalent potential temperature （θc） in the saturated atmosphere, generalized potential tem- perature （θ＂） has already proven a better thermodynamic parameter in describing the non-uniformly saturated real atmosphere. To add otherwise absent graphic explanations, this paper first presents the physical definition of θ through a tephigram. Then, the utility of the measurement in identifying and forecasting the locations of precipita- tion maxima and heat wave areas with diagnostic com- parison studies and traditionally used thermodynamic parameters is shown.展开更多
AA5083 friction stir welds were produced using systematic experimental design, the process forces and heat input with varying parameters were studied. Helpful empirical models were developed in designing friction stir...AA5083 friction stir welds were produced using systematic experimental design, the process forces and heat input with varying parameters were studied. Helpful empirical models were developed in designing friction stir welding （FSW） tools and FSW welders. These models may be further helpful for making process parameter choice for this sort of alloy, defining welding program and control of process parameters by using computer numerical control friction stir welding welders. The results show that tool rotational speed, welding speed and tool shoulder diameter are most significant parameters affecting axial force and heat input, while longitudinal force is significantly affected by welding speed and probe diameter.展开更多
The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium....The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb^2＋ adsorbed on D152 resin can be eluted with 0.05 mol/L HCI quantitatively. The adsorption rate constants determined under various temperatures are k288 n=2.22×10-5 s^-1, k298 K=2.51 × 10^-5 s^-1, and k308 K= 2.95 × 10^-5 s^-1, respectively. The apparent activation energy, Ea is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH^Θ=13.3 kJ/mol, ΔS^Θ=119 J/（mol·K）, and ΔG^Θ298 K =-22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb^2＋ follows Langmuir model.展开更多
Thermodynamic parameters of complexation of naphto- 15-crown-5 with four alkaline earth ions in aqueous media was determined using titration microcalorimetry at 298.15 K. The stability of the complexes, thermal effect...Thermodynamic parameters of complexation of naphto- 15-crown-5 with four alkaline earth ions in aqueous media was determined using titration microcalorimetry at 298.15 K. The stability of the complexes, thermal effect and entropy effect of the complexation is discussed on the basis of the guest ions structure and the solvent effect. The stability constants tendency to vary with ion radius was interpreted. Complex of naphtha-15-crown-5 with calcium ion is very stable due to the synergism of static electric interaction and size selectivity between the host and the guest.展开更多
Cubic equations of state(EOSs) are simple and easy at calculation. One way of improving the accuracy of a cubic EOS is through the modification of temperature-dependent energy parameter by using alpha-function.The ind...Cubic equations of state(EOSs) are simple and easy at calculation. One way of improving the accuracy of a cubic EOS is through the modification of temperature-dependent energy parameter by using alpha-function.The industrial applications of natural gas are very wide and as a result, prediction of thermodynamic properties and phase behavior of natural gas is an important part of design for such processes. In this work we develop a newα-function for the Peng-Robinson(PR) EOS with the parameters optimized especially for natural gas components.The parameters are generalized as a linear function of acentric factor. The results are compared to the predictions from original PR EOS and other α-functions in literature. It is shown that the new α-function presents a good accuracy with the average deviation of 1.42% for natural gas components.展开更多
Viscosities of uranium solutions in H2O and 3 mol/L HNO3 medium were measured by Ubbelhode flow vis-cometer in the concentration range of 0.5%3.0% from 10 篊 to 30 篊 at 5 篊 interval. Viscosity data were interpreted ...Viscosities of uranium solutions in H2O and 3 mol/L HNO3 medium were measured by Ubbelhode flow vis-cometer in the concentration range of 0.5%3.0% from 10 篊 to 30 篊 at 5 篊 interval. Viscosity data were interpreted in terms of an empirical equation; h =aoexp(boM+coM2). Values of coefficients ao, bo and co were calculated for all the three systems studied. Flow activation energies and thermodynamic parameters were also evaluated.展开更多
A modified systematic approach to determination of the kinetics of well known reaction from calorimetric data is addressed in this study. Because the application of calorimetry does not depend upon knowledge of concen...A modified systematic approach to determination of the kinetics of well known reaction from calorimetric data is addressed in this study. Because the application of calorimetry does not depend upon knowledge of concentration profiles, it has the advantage over other real-time analyses. Estimated kinetic parameters were compared with the ones obtained with Fourier Transform Infrared Spectroscopy （FTIR）. The chosen reaction was ethyl benzoate saponification performed in homogeneous reaction medium, although it is known as heterogeneous reaction. Thus, the rate expression was developed where no mass transfer is considered. The reaction was carried out in a MettlerTM RCI reaction calorimeter.展开更多
A new self-condensing vinyl polymerization system consisting of *ABf-type inimers is studied by the principle of statistical mechanics. To obtain the relevant average properties of the system, a differential equation ...A new self-condensing vinyl polymerization system consisting of *ABf-type inimers is studied by the principle of statistical mechanics. To obtain the relevant average properties of the system, a differential equation satisfied by the polymeric moment of interest is given, and as a result the zeroth, first, second, and third polymeric moments together with the size distribution function of hyperbranched polymers(HBPs) are explicitly presented. As an application of the method of statistical mechanics, several thermodynamic quantities such as the equilibrium free energy, law of mass action, isothermal compressibility, internal energy, and the specific heat associated with the polymerization are all derived. Furthermore, the scaling behavior of asymptotic size distribution function is discussed, by which a reasonable interpretation of the polydispersity index near the end of polymerization can be made. Also, the expressions of some structural parameters such as the numbers of inimers, terminal units, chain units, branched units, and the degree of branching(DB) are calculated. It is found that a high functionality is helpful to improve the DB of the resultant HBPs. These results show that the functionality f has a significant effect on the thermodynamic quantities and structural properties of HBPs.展开更多
基金supported by the National Basic Research Program of China (2009CB421505)the National Natural Science Foundation of China (41075044 and 41075079)
文摘Compared to potential temperature （θ） in the dry atmosphere and equivalent potential temperature （θc） in the saturated atmosphere, generalized potential tem- perature （θ＂） has already proven a better thermodynamic parameter in describing the non-uniformly saturated real atmosphere. To add otherwise absent graphic explanations, this paper first presents the physical definition of θ through a tephigram. Then, the utility of the measurement in identifying and forecasting the locations of precipita- tion maxima and heat wave areas with diagnostic com- parison studies and traditionally used thermodynamic parameters is shown.
文摘AA5083 friction stir welds were produced using systematic experimental design, the process forces and heat input with varying parameters were studied. Helpful empirical models were developed in designing friction stir welding （FSW） tools and FSW welders. These models may be further helpful for making process parameter choice for this sort of alloy, defining welding program and control of process parameters by using computer numerical control friction stir welding welders. The results show that tool rotational speed, welding speed and tool shoulder diameter are most significant parameters affecting axial force and heat input, while longitudinal force is significantly affected by welding speed and probe diameter.
基金Project(2008F70059) supported by the Scientific and Technological Research Planning of Zhejiang Province, China
文摘The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb^2＋ adsorbed on D152 resin can be eluted with 0.05 mol/L HCI quantitatively. The adsorption rate constants determined under various temperatures are k288 n=2.22×10-5 s^-1, k298 K=2.51 × 10^-5 s^-1, and k308 K= 2.95 × 10^-5 s^-1, respectively. The apparent activation energy, Ea is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH^Θ=13.3 kJ/mol, ΔS^Θ=119 J/（mol·K）, and ΔG^Θ298 K =-22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb^2＋ follows Langmuir model.
文摘Thermodynamic parameters of complexation of naphto- 15-crown-5 with four alkaline earth ions in aqueous media was determined using titration microcalorimetry at 298.15 K. The stability of the complexes, thermal effect and entropy effect of the complexation is discussed on the basis of the guest ions structure and the solvent effect. The stability constants tendency to vary with ion radius was interpreted. Complex of naphtha-15-crown-5 with calcium ion is very stable due to the synergism of static electric interaction and size selectivity between the host and the guest.
文摘Cubic equations of state(EOSs) are simple and easy at calculation. One way of improving the accuracy of a cubic EOS is through the modification of temperature-dependent energy parameter by using alpha-function.The industrial applications of natural gas are very wide and as a result, prediction of thermodynamic properties and phase behavior of natural gas is an important part of design for such processes. In this work we develop a newα-function for the Peng-Robinson(PR) EOS with the parameters optimized especially for natural gas components.The parameters are generalized as a linear function of acentric factor. The results are compared to the predictions from original PR EOS and other α-functions in literature. It is shown that the new α-function presents a good accuracy with the average deviation of 1.42% for natural gas components.
文摘Viscosities of uranium solutions in H2O and 3 mol/L HNO3 medium were measured by Ubbelhode flow vis-cometer in the concentration range of 0.5%3.0% from 10 篊 to 30 篊 at 5 篊 interval. Viscosity data were interpreted in terms of an empirical equation; h =aoexp(boM+coM2). Values of coefficients ao, bo and co were calculated for all the three systems studied. Flow activation energies and thermodynamic parameters were also evaluated.
文摘A modified systematic approach to determination of the kinetics of well known reaction from calorimetric data is addressed in this study. Because the application of calorimetry does not depend upon knowledge of concentration profiles, it has the advantage over other real-time analyses. Estimated kinetic parameters were compared with the ones obtained with Fourier Transform Infrared Spectroscopy （FTIR）. The chosen reaction was ethyl benzoate saponification performed in homogeneous reaction medium, although it is known as heterogeneous reaction. Thus, the rate expression was developed where no mass transfer is considered. The reaction was carried out in a MettlerTM RCI reaction calorimeter.
基金supported by the National Natural Science Foundation of China(21274056,21374028)Natural Science Foundation of Hebei province(B2015408007)the doctoral funds of Langfang Teachers University(LSBS201308)
文摘A new self-condensing vinyl polymerization system consisting of *ABf-type inimers is studied by the principle of statistical mechanics. To obtain the relevant average properties of the system, a differential equation satisfied by the polymeric moment of interest is given, and as a result the zeroth, first, second, and third polymeric moments together with the size distribution function of hyperbranched polymers(HBPs) are explicitly presented. As an application of the method of statistical mechanics, several thermodynamic quantities such as the equilibrium free energy, law of mass action, isothermal compressibility, internal energy, and the specific heat associated with the polymerization are all derived. Furthermore, the scaling behavior of asymptotic size distribution function is discussed, by which a reasonable interpretation of the polydispersity index near the end of polymerization can be made. Also, the expressions of some structural parameters such as the numbers of inimers, terminal units, chain units, branched units, and the degree of branching(DB) are calculated. It is found that a high functionality is helpful to improve the DB of the resultant HBPs. These results show that the functionality f has a significant effect on the thermodynamic quantities and structural properties of HBPs.
