期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
高承载能力减速器热功率分析及提高方法 被引量:2
1
作者 徐鸿钧 陈亚文 《机械工艺师》 CSCD 2000年第9期54-55,共2页
简述了圆柱齿轮减速器的发热和散热及热功率 ,介绍了三种提高热功率的方法。
关键词 热功率分析 高承载能力圆柱齿轮减速器
原文传递
光功率热分析仪的温度校准方法研究 被引量:3
2
作者 李硕 余志高 +1 位作者 姚雅萱 任玲玲 《计量学报》 CSCD 北大核心 2021年第1期41-45,共5页
薄膜材料相变温度的准确测量是相变材料的应用关键。光功率热分析仪是基于薄膜材料相变前后光反射率发生突变的原理测量相变温度的新型仪器,采用真空红外加热方式达到相变温度。为了测量得到准确可靠的相变温度,通过对光功率热分析仪测... 薄膜材料相变温度的准确测量是相变材料的应用关键。光功率热分析仪是基于薄膜材料相变前后光反射率发生突变的原理测量相变温度的新型仪器,采用真空红外加热方式达到相变温度。为了测量得到准确可靠的相变温度,通过对光功率热分析仪测量相变温度方式、标准热电偶原位校准仪器测温热电偶方法的研究,实现将相变温度溯源至SI单位,并且对在测温区间100~1 000℃内的温度进行了不确定度评定,得到校准拟合公式,相关系数为0.999 7。 展开更多
关键词 计量学 相变温度 功率分析 薄膜材料 原位校准 不确定度评定
下载PDF
汽车前侧风挡饰条模具热流道系统设计 被引量:3
3
作者 刘鑫 李金良 +1 位作者 郭恒亚 黄明 《工程塑料应用》 CAS CSCD 北大核心 2020年第5期109-113,共5页
以汽车前侧风挡饰条双色注塑模具的热流道系统设计应用为例,分析了制件的结构特征,在不影响制件整体结构的合适位置设置工艺孔从而保证制件两种材料部分的牢固贴合。针对两种不同材质组成的制件注塑成型工艺中的难点,在硬胶部分设置软... 以汽车前侧风挡饰条双色注塑模具的热流道系统设计应用为例,分析了制件的结构特征,在不影响制件整体结构的合适位置设置工艺孔从而保证制件两种材料部分的牢固贴合。针对两种不同材质组成的制件注塑成型工艺中的难点,在硬胶部分设置软胶浇注工艺凹槽,避免软胶浇口分离时应力集中破坏制件表面,利用CAE模流分析结果对浇注系统进行优化设计,通过对热流道板加热功率分析计算设计了热流道板和喷嘴,完成了双色模具不同材料热流道系统的设计。模具的实际生产实践证明,该模具热流道系统结构设计合理,提高了制件成型质量,缩短了制件成型周期,大批量生产过程运行平稳。 展开更多
关键词 汽车前侧风挡饰条 流道系统 热功率分析
下载PDF
Thermodynamic analysis of simplified dual-pressure ammonia-water absorption power cycle 被引量:5
4
作者 华君叶 陈亚平 +1 位作者 刘化瑾 吴嘉峰 《Journal of Central South University》 SCIE EI CAS 2012年第3期797-802,共6页
A simplified dual-pressure ammonia-water absorption power cycle(DPAPC-a) using low grade energy resources is presented and analyzed.This cycle uses turbine exhaust heat to distill the basic solution for desorption.The... A simplified dual-pressure ammonia-water absorption power cycle(DPAPC-a) using low grade energy resources is presented and analyzed.This cycle uses turbine exhaust heat to distill the basic solution for desorption.The structure of the cycle is simple which comprises evaporator,turbine,regenerator(desorber),absorber,pump and throttle valves for both diluted solution and vapor.And it is of high efficiency,because the working medium has large temperature difference in evaporation and small temperature difference in absorptive condensation,which can match the sensible exothermal heat resource and the cooling water simultaneously.Orthogonal calculation was made to investigate the influence of the working concentration,the basic concentration and the circulation multiple on the cycle performance,with 85-110 ℃ heat resource and 20-32 ℃ cooling water.An optimum scheme was given in the condition of 110 ℃ sensitive heat resource and 20 ℃ cooling water,with the working concentration of 0.6,basic concentration of 0.385,and circulation multiple of 5.The thermal efficiency and the power recovery efficiency are 8.06 % and 6.66%,respectively.The power recovery efficiency of the DPAPC-a is 28.8% higher than that of the steam Rankine cycle(SRC) and 12.7% higher than that of ORC(R134a) under the optimized situation. 展开更多
关键词 absorption power cycle AMMONIA-WATER circulation multiple ammonia concentration Kalina cycle
下载PDF
Power output analyses and optimizations of the Stirling cycle 被引量:13
5
作者 ZHOU Bing CHENG XueTao LIANG XinGang 《Science China(Technological Sciences)》 SCIE EI CAS 2013年第1期228-236,共9页
Based on the finite time thermodynamics theory,the entransy theory and the entropy theory,the Stirling cycles under different conditions are analyzed and optimized with the maximum output power as the target in this p... Based on the finite time thermodynamics theory,the entransy theory and the entropy theory,the Stirling cycles under different conditions are analyzed and optimized with the maximum output power as the target in this paper.The applicability of entransy loss(EL),entransy dissipation(ED),entropy generation(EG),entropy generation number(EGN) and modified entropy generation number(MEGN) to the system optimization is investigated.The results show that the maximum EL rate corresponds to the maximum power output of the cycle working under the infinite heat reservoirs whose temperatures are prescribed,while the minimum EG rate and the extremum ED rate do not.For the Stirling cycle working under the finite heat reservoirs provided by the hot and cold streams whose inlet temperatures and the heat capacity flow rates are prescribed,the maximum EL rate,the minimum EG rate,the minimum EGN and the minimum MEGN all correspond to the maximum power output,but the extremum ED rate does not.When the heat capacity flow rate of the hot stream increases,the power output,the EL rate,the EG rate and the ED rate increase monotonously,while the EGN and the MEGN decrease first and then increase.The EL has best consistency in the power output optimizations of the Stirling cycles discussed in this paper. 展开更多
关键词 Stirling cycle entropy generation entransy loss finite time thermodynamics OPTIMIZATION
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部