新型热动力式疏水阀

疏水阀是蒸汽供热系统凝结水管道中起自动阻汽排水作用的重要部件.热动力式疏水阀结构简单、体积小、重量轻、价格便宜、排水量大、漏汽量少、能自动排除空气和残渣,维修方便,使用寿命长.为了改进热动力式疏水阀的技术性能,提高产品质量,一机部六院协助郑州市高山水暖器材厂,在总结国内经验。

自由半浮球式蒸汽疏水阀性能介绍

蒸汽疏水阀结构设计的合理性,制造的质量好坏,使用寿命的长短,安装维护的正确等因素直接影响着正常的生产和热能的高效利用。 蒸汽疏水阀按其结构原理基本可分以下几种形式:机械式,热静力式。

一种新型的三通恒温阀

基于蜡式热动力元件的恒温阀是一种集测量、执行、控制功能于一体的新型高效高科技产品。该文阐述了这种阀的结构及工作原理,简要分析了其主要性能参数,探讨了它在注塑机液压驱动冷却系统中的应用。

新型疏水阀研制成功

在石油、化工、纺织、印染和造纸企业里广泛使用的热动力式疏水阀(图1),一般只能排饱和温度或接近饱和温度的水,其排水温度不能调节。这种疏水阀是依据流体动力学的动压和静压的变化,使阀片瞬间上下跳动达到阻气排水目的。它的缺点是噪声大,闪蒸出二次蒸气多,对建筑物有冲蚀作用还不利于安全生产。

具有节能作用的疏水器

简要阐述了疏水器的节能作用、种类及性能,并介绍了如何选择和维护管理疏水器。

Preparation of basic magnesium carbonate and its thermal decomposition kinetics in air

The thermal decomposition process of basic magnesium carbonate was investigated. Firstly, Basic magnesium carbonate was prepared from magnesite, and the characteristics of the product were detected by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. Subsequently, the thermal decomposition process of basic magnesium carbonate in air was studied by thermogravimetry-differential thermogravimetry （TG-DTG）. The results of XRD confirm that the chemical composition of basic magnesium carbonate is 4MgCO3·Mg（OH）2·4H2O. And the SEM images show that the sample is in sheet structure, with a diameter of 0.1-1 μm. The TG-DTG results demonstrate that there are two steps in the thermal decomposition process of basic magnesium carbonate. The apparent activation energies （E） were calculated by Flyrm-Wall-Ozawa method. It is obtained from Coats-Redfem＇s equation and Malek method that the mechanism functions of the two decomposition stages are D3 and A1.5, respectively. And then, the kinetic equations of the two steps were deduced as well.

Mechanism and Kinetics of Thermal Dissociation of Inclusion Complex of β-Cyclodextrin and 1-Methylcyclopropene

The inclusion-complex of CD-MCP （β-cyclodextrin （β-CD） including 1-methylcyclopropene （1-MCP）） was prepared and characterized. Basing on programmed-heating procedure and weight-temperature analysis, as well as the application of Satava-Sestak＇s, Ozawa＇s and Kissinger＇s methods, the mechanism and kinetics of thermal dissociation of this inclusion complex were studied. An additional mass loss is found at 170-180℃. The mechanism of thermal dissociation of CD-MCP is dominated by a one-dimensional random nucleation and subsequent growth process （A2/3）. The activation energy Es and the pre-exponential factor AS for the process are 102.14 kJ/mol and 3.63×10^10s^-1, respectively. This ES value shows that there is no strong chemical intere, ctions between β-CD and 1-MC;P,

A Revised CFB Wall-to-suspension Heat Transfer Model

Based on the Cluster Renewal Model of the particle motion in a CFB riser, a revised heat transfer model is developed, which introduces the latest research results of the hydrodynamics of the suspension flow in CFB. This model divides the heat transfer into two parts, which are due to the transient heat conduction by the covered clusters and the convection between the uncovered wall and the dispersed phase. Radiation at high temperature is regarded as being additive. The fraction of the covered wall by clusters is revised by a new formula, which is a function of the operating condition and the particle properties. The radiation between the dispersed phase and the uncovered wall includes not only the direct radiation to the uncovered wall, but also the radiation to the clusters and then reflected to the uncovered wall. Calculation was carried out for the CFB heat transfer model. The results were compared with the published typical experimental data of other researchers and showed a good agreement between them.

Modeling and simulation of dynamic performance of horizontal steam-launch system

Based on theory of variable-mass system thermodynamics, the dynamic mathematic models of each component of the horizontal steam-launch system were established, and by the numerical simulation of the system launching process, the thermodynamics and kinetics characteristics of the system with three valves of different flow characteristics were got. The simulation results show that the values of the peak-to-average ratios of dimensionless acceleration with the equal percentage valve, the linear valve and the quick opening valve are 1.355, 1.614 and 1.722, respectively, and the final values of the dimensionless velocities are 0.843, 0.957 and 1.0, respectively. In conclusion, the value of the dimensionless velocity with the equal percentage valve doesn't reach the set value of 0.90 when the dimensionless displacement is 0.82, while the system with the linear valve can meet the launching requirement, as well as the fluctuation range of dimensionless acceleration is less than that of the quick opening valve. Therefore, the system with the linear valve has the best performance among the three kinds of valves.

Design and parametric optimization of thermal management of lithium-ion battery module with reciprocating air-flow

Single cell temperature difference of lithium-ion battery(LIB) module will significantly affect the safety and cycle life of the battery. The reciprocating air-flow module created by a periodic reversal of the air flow was investigated in an effort to mitigate the inherent temperature gradient problem of the conventional battery system with a unidirectional coolant flow with computational fluid dynamics(CFD). Orthogonal experiment and optimization design method based on computational fluid dynamics virtual experiments were developed. A set of optimized design factors for the cooling of reciprocating air flow of LIB thermal management was determined. The simulation experiments show that the reciprocating flow can achieve good heat dissipation, reduce the temperature difference, improve the temperature homogeneity and effectively lower the maximal temperature of the modular battery. The reciprocating flow improves the safety, long-term performance and life span of LIB.

Kinetic Modeling of Isothermal or Non-isothermal Adsorption in a Pellet：Application to Adsorption Heat Pumps

Understanding the interaction between a fluid and a solid phase is of fundamental importance to the design of an adsorption process.Because the heat effects associated with adsorption are comparatively large,the as-sumption of isothermal behavior is a valid approximation only when uptake rates are relatively slow.In this article,we propose to determine when it is needed to choose the isothermal or non-isothermal assumption according to two physical parametersα（ratio convection/capacity） andβ（quantity of energy/capacity） .The proposed problem is solved by a mathematical method in the Laplace domain.Whenα→∞（infinitely high heat transfer coefficient） or β→0（infinitely large heat capacity） ,the limiting case is isothermal.When the diffusion is rapid（α10） the kinetics of sorption is controlled entirely by heat transfer.If the adsorption process is to be used as a heat pump,it shall be represented by an isotherm model withαandβas high as possible.

Mechanism and kinetics of coal utilization by thermal analysis

Coals are carbon-rich materials with excellent aromatic nature and macro- molecular structure. They pose great potential as the source of organic chemical feed- stock and high value-added carbonaceous materials in the 21st century. As some of the most important analytical methods, thermal analysis (TA) techniques with strong com- petence in materials characterization and reaction mechanism research, have been ex- tensively employed to accumulate the knowledge about coal conversion and utilization in a most effective, efficient and responsible way. Unfortunately, some efforts did not promote the sound growth of a systematic discipline, which might arise from the intrinsic drawback of conventional TA. Proposals on acquiring much more reliable understanding of the mechanism and kinetics of reactions were made in this review.

Evaluation of the Thermodynamic Performance of the Traditional Passive Systems

The energy consumption of buildings in urban areas is one of the greatest source of energy wasting and, consequently, ofincreasing of CO2 emission. Research is currently focused on the reduction of this consumption through the use of passive air-conditioning systems, that can be integrated with conventional systems and give rise to the so-called hybrid systems. Historically, these passive systems were developed in the Mediterranean and Middle East area. The research approach on this topic involves the application of design strategies and the development of computational tools and control systems. The development of the hybrid systems is the result of the synergy between current scientific knowledge, advanced manufacturing and information technology. In this study, a modular housing system has been investigated under different conditions. Simulations have been repeated, in order to identify the configuration that provides the highest indoor comfort. The analysis of the different conditions has been carried out using a CFD （computational fluid dynamic） software. The paper shows the results developed by the Dipartimento di Architettura of the Universit^t di Palermo in the analysis of the natural ventilation effect on the indoor comfort.