Preparation and Characterization of ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)System Low Melting Sealing Glasses

Lead-free low melting glasses,ZnO-CuO-Bi_(2)O_(3)-B_(2)O_(3)-SiO_(2)system,with fixed contents of 15 mol%CuO and 20 mol%Bi_(2)O_(3),were prepared by using melt cooling method.Structure and thermal properties of the glasses were studied by using X-ray diffractometer(XRD),infrared spectrometer(FIT-IR),thermal dilatometer and differential thermal analyzer(DTA).Chemical durability of the glasses was studied by using dissolution rate method.Wettability of glasses on substrate was tested by using button sintering experiment.It is found that alkaline resistance of the glass solders is lower than that of plate glass and the water resistance is comparable with that of plate glass.The sealing temperatures are Ts=445-490℃,while the average thermal expansion coefficient from room temperature to 300℃is in the range of(65-82)×10^(−7)℃^(−1).At sealing temperature,the glass solders have good wettability on plate glass or alumina substrate.They are not crystallized even sintered at the sealing temperature for 30 min.The solder glasses are suitable for sealing plate glass,alumina and other inorganic non-metallic materials.

硅凝胶在消防灭火中的应用研究

本文在水灭火剂基础上，通过添加试剂使水形成硅凝胶，增加水的加热稳定性，延长水在可燃基材上的停留时间，提高水的有效隔氧降温能力，以充分发挥水的灭火性能，降低用水量，提高灭火速度、灭火效率和灭火安全性。

Effects of thermal oxidation on microwave-absorbing and mechanical properties of SiC_f/SiC composites with PyC interphase

The SiCf/SiC composites containing PyC interphase were prepared by chemical vapor infiltration process. The influences of thermal oxidation on the complex permittivity and microwave absorption properties of Si Cf/Si C composites were investigated in the frequency range of 8.2-12.4 GHz. Both the real and imaginary parts of the complex permittivity decreased after thermal oxidation. The composites after 100 h thermal oxidation showed that reflection loss exceeded-10 d B in the frequency of 9.7-11.9 GHz and the minimum value was-11.4 d B at 11.0 GHz. The flexural strength of composites decreased but fracture behavior was improved obviously after thermal oxidation. These results indicate that the SiCf/SiC composites containing PyC interphase after thermal oxidation possess good microwave absorbing property and fracture behavior.

Mechanical properties of Mg-6Gd-1Y-0.5Zr alloy processed by low temperature thermo-mechanical treatment

An as-solution treated Mg-6Gd-1Y-0.4Zr alloy was processed by low temperature thermo-mechanical treatments （LT-TMT）, including cold tension with various strains followed by aging at 200 °C to peak hardness. The results show that the precipitation kinetics of the alloy experienced LT-TMT is greatly accelerated and the aging time to peak hardness is greatly decreased with increasing tensile strain. The tensile yield strength, ultimate tensile strength and elongation at room temperature of the alloy after cold tension with strain of 10% and peak aging at 200 °C are 251 MPa, 296 MPa and 8%, respectively, which are superior to the commercial heat-resistant WE54 alloy, although the latter has a higher rare earth element content.

Elastic and thermodynamic properties of Re_2N at high pressure and high temperature

First principles calculations are preformed to systematically investigate the elastic and thermodynamic properties of Re2N at high pressure and high temperature. The Re2N exhibits a clear elastic anisotropy and the elastic constants C11 and C33 vary rapidly in comparison with the variations in C12, C13 and C44 at high pressure. In addition, bulk modulus B, elastic modulus E, and shear modulus Gas a function of crystal orientations for Re2N are also investigated for the first time. The tensile directional dependences of the elastic modulus obey the following trend： [0001] [1211] [1010] [1011]EEEE〉〉〉 . The shear moduli of Re2N within the （0001） basal plane are the smallest and greatly reduce the resistance of against large shear deformations. Based on the quasi-harmonic Debye model, the dependences of Debye temperature, Grüneisen parameter, heat capacity and thermal expansion coefficient on the temperature and pressure are explored in the whole pressure range from 0 to 50 GPa and temperature range from 0 to 1600 K.

Si phase morphology and mechanical properties of ZL107 Al alloy improved by La modification and heat treatment

The phase morphology evolution during the solid solution treatment and then artificial aging of the La-modified ZL107 Al alloy was studied. The results show that when the solid solution was held at 560 ℃ for 6 h, only partial Si phase dissolved into the matrix; however, the precipitation also occurred during the artificial aging process. The precipitation process in Al-Si alloys with or without La-modification was compared. After modification and heat treatment, the mechanical properties of the alloy were greatly enhanced, due to the modification and uniform distribution of Si phase.

Influence of carbon coating prepared by microwave pyrolysis on properties of LiNi_(1/3) Mn_(1/3) Co_(1/3) O_2

A novel synthesis method of carbon-coated LiNil/3Mnl/3COl/302 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, X-ray fluorescence （XRF） and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNil/3Mnl/3C01/302 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNii/3Mnl/3C01/302. The specific discharge capacity retention of the carbon-coated LiNi1/3Mnt/3Col/30z reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.

INTERFACIAL BONDING IN AS DEPOSITED AND ANNEALED Co/C SOFT X RAY MULTILAYER MIRRORS

Interfacial bonding in as deposited and annealed Co/C soft X ray multilayer structures is investigated by X ray photo electron spectroscopy (XPS).It is found that there is interdiffusion between cobalt and carbon in the as deposited Co/C multilayers,and this is confirmed by structure characterization using low angle X ray diffraction (LAXD).The calculation of the chemical shifts in Co C system based on Miedemas macroscopic atom model suggests that it is impossible to detect the chemical shift experimentally in the Co C compound,which is consistent with the XPS results.The presence of metallic carbide bonding is evidenced through the nature of the carbon bonding in survey taken at Co C and C Co interfaces of annealed samples.Our results also indicate that XPS is a direct method to probe the chemical bonding at the interfaces.

Potential Function and Thermodynamic Property of UO

Potential energy scan for uranium oxide （UO） was performed by ab initio configuration inter- action （CI） method and density functional theory methods at the PBE1 and the B3LYP levels in combination with the （ECPSOMWB_AVQZ＋2f） basis set for uranium and 6-311＋G＊ for oxygen. The dissociation energies of UO, after being corrected for the zero-point vibrational energy, are 2.38, 3.76, and 3.31 eV at the CI, PBE1, and BaLYP levels, respectively. The calculated energy was fitted to potential functions of Morse, Lennard-Jones, and Rydberg. Only the Morse function is eligible for the potential. The anharmonieity constant is 0.00425. The anharmonic frequency is 540.95 em-1 deduced from the PBE1 results. Thermodynamic properties of entropy and heat capacity at 298.2-1500 K were calculated using DFT-UPBE1 results and Morse parameters. The relationship between entropy and temperature was established.

Microstructures and properties of welded joint of aluminum alloy to galvanized steel by Nd:YAG laser + MIG arc hybrid brazing-fusion welding

According to the differences in melting point between aluminum alloy and steel, 6013-T4 aluminum alloy was joined to galvanized steel by large spot Nd：YAG laser ＋ MIG arc hybrid brazing-fusion welding with ER4043（AlSi5） filler wire. The microstructures and mechanical properties of the brazed-fusion welded joint were investigated. The joint is divided into two parts of fusion weld and brazed seam. There is a zinc-rich zone at fusion weld toe, which consists of α（Al）-Zn solid solution and Al-Zn eutectic. The brazed seam is the Fe-Al intermetallic compounds （IMCs） layer of 2-4μm in thickness, and the IMCs include FeAl2, Fe2Al5 and Fe4Al13. FeAl2 and Fe2Al5 are located in the compact reaction layer near the steel side, and Fe4Al13 with tongue shape or sawtooth shape grows towards the fusion weld. The tensile strength of the joint firstly increases and then decreases as the welding current and laser power increase, the highest tensile strength can be up to 247.3 MPa, and the fracture usually occurs at fusion zone of the fusion weld. The hardness is the highest at the brazed seam because of hard Fe-Al IMCs, and gradually decreases along the fusion weld and galvanized steel, respectively.

Fabrication and Electrical Properties of Titanium Oxide by Thermally Oxidizing Titanium on Silicon

Polycrystalline titanium oxide films are fabricated on silicon by thermally oxidizing titanium.The current- voltage and capacitance- voltage characteristics of the Ag/Ti Ox/Si/Ag capacitors are m easured.The thickness of the titanium oxide films arranges from15 0 nm to2 5 0 nm,and their dielectric constants are within40～ 87.As the oxida- tion tim e is shortened,the fixed charges of the titanium oxide films become less and the leakage current characteris- tics becom e better.

Aggregate Stability and Its Relationship with Some Chemical Properties of Red Soils in Subtropical China

The stability of aggregates in the surface soil is crucial to soil erosion and runoff generation. Thus, to understand the stability and the breakdown mechanisms of soil aggregates as well as the relationship between aggregate stability and selected soil chemical properties, such as different forms of Fe and Al oxides, organic matter, CEC and clay content, the aggregates of slightly and severely eroded red soils derived from Quaternary red clay in subtropical China were analyzed using the routine wet sieving…

Calculation and Verification for the Thermodynamic Data of 3CaO·3Al_2O_3·CaSO_4

Calcium sulfoaluminate,3CaO·3Al2O3·CaSO4,has been widely recognized in the realms of high-temperature combustion and cement chemistry.However,the lack of relevant thermodynamic data limits the progress of its research and development.Through comparative calculations using several different approaches,we obtain the thermochemical properties of 3CaO·3Al2O3·CaSO4 in this work,such as its standard formation enthalpy,Gibbs free en- ergy of formation,entropy,and molar heat capacity.With these fundamental data,thermodynamic calculations become possible for reactions involving this mineral.It is found that some reactions proposed in literature to generate this mineral may not proceed thermodynamically.

A phase inversion based sponge-like polysulfonamide/SiO_2 composite separator for high performance lithium-ion batteries

In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.

Comparison on Thermal Conductivity and Permeability of Granular and Consolidated Activated Carbon for Refrigeration

This paper focuses on the development of three types of activated carbon （AC） adsorbents, i.e. granular AC, consolidated AC with chemical binder, and consolidated AC with expanded natural graphite （ENG）. Their thermal conductivity was investigated with the steady-state heat source method and the permeability was tested with nitrogen as the gas source. Results show that the thermal conductivity of granular AC with different sizes al-most maintains a constant at 0.36 W-（m.K）-＇, while the value modestly increases to 0.40 W.（m.K）-＇ for the con- solidated AC with chemical binder. The consolidated AC with ENG at the density of 600 kg. m-3 shows the best heat transfer performance and their thermal conductivity vary from 2.08 W-（m.K）- to 2.61 W. （m.K）-1 according toits fraction of AC. However, the granular AC and consolidated AC with chemical binder show the better permeabil- ity performance than consolidated AC with ENG binder whose permeability changes from 6.98x10-13 m2 to 5.16x10TM m2 and the maximum occurs when the content of AC reaches 71.4% （by mass）. According to the differ- ent thermal properties, the refrigeration application of three types of adsorbents is analyzed.

Analysis of seasonal variation of water masses in East China Sea

Seasonal variations of water masses in the East China Sea(ECS) and adjacent areas are investigated, based on historical data of temperature and salinity( T-S). Dynamic and thermodynamic mechanisms that affect seasonal variations of some dominant water masses are discussed, with reference to meteorological data. In the ECS above depth 600 m, there are eight water masses in summer but only five in winter. Among these, Kuroshio Surface Water(KSW), Kuroshio Intermediate Water(KIW), ECS Surface Water(ECSSW), Continental Coastal Water(CCW), and Yellow Sea Surface Water(YSSW) exist throughout the year. Kuroshio Subsurface Water(KSSW), ECS Deep Water(ECSDW), and Yellow Sea Bottom Water(YSBW) are all seasonal water masses, occurring from May through October. The CCW, ECSSW and KSW all have significant seasonal variations, both in their horizontal and vertical extents and their T-S properties. Wind stress, the Kuroshio and its branch currents, and coastal currents are dynamic factors for seasonal variation in spatial extent of the CCW, KSW, and ECSSW, whereas sea surface heat and freshwater fl uxes are thermodynamic factors for seasonal variations of T-S properties and thickness of these water masses. In addition, the CCW is affected by river runoff and ECSSW by the CCW and KSW.

Industrial catalysis:Strategies to enhance selectivity

Precise control of catalytic selectivity is a key concept of green chemistry,and also an important driving force for the sustainable development of catalytic industry.Selectivity not only determines the atomic economy of the catalytic process,but also affects the energy consumption of subsequent separation process.The objective of this review is to illustrate successful catalyst design strategies to enhance selectivity,by using several important catalytic cases of petroleum refining and petrochemicals.These industrial applications and cutting-edge research cases mainly use the strategies of coupling,decoupling or confinement of adsorption sites and active sites to tune the diffusion barrier and activation energy barrier in different routes,so as to improve the selectivity of catalyst.Based on the preliminary understanding of selectivity improvement,it is necessary to systematically investigate the selective catalytic processes using combination of multiple strategies,thereby realizing the design of highly selective catalyst over reasonable time scales and space scales.

Study on Modification of Ultra-Stable Zeolite Prepared by Hydrothermal Method

The ultra-stable zeolite DASY-0.0 was prepared by hydrothermal method in commercial scale. Its structure was further modified via the treatment for cleaning of pores （CP）. The zeolite samples before and after CP treating were analyzed and characterized by XRF, XRD, NMR, IR, BET and DTA. The results showed that, in comparison with the conventional ultra-stable zeolite DASY-0.0 prepared by the hydrothermal process, the CP-modified zeolite SOY0 exhibited a higher relative crystallinity, a larger surface area and pore volume, a higher thermal stability and contained less amorohous non-framework A1.

Relationship between Physical and Chemical Soil Attributes and Plant Species Diversity in Tropical Mountain Ecosystems from Brazil

Although the high diversity of plant species in the rupestrian fields has been primarily attributed to the existence of a set of distinct habitats, few studies support this assertion. The present study aimed to further investigate the relationship between physical and chemical attributes of soils with the diversity of plant species in this unique ecosystem. The rupestrian field is a unique vegetation formation that covers some of the southeastern Brazilian mountains in the transition of the Atlantic rain forest and the Cerrado(savanna). Different habitats occur according to soil characteristics(e.g., presence of rocks, sand, fertility, hydrology, etc.). These attributes ultimately influence the vegetation that is highly adapted to the harsh edaphic and climatic mountain conditions. Five distinct habitats were studied by us: rocky outcrops, peat bogs, sandy bogs, quartz gravel fields, and "cerrado"(savanna). A floristic survey indicated that four families are found at greater frequency: Poaceae, Asteraceae, Cyperaceae, and Leguminosae. The greatest diversity of plant species was found in the rocky outcrops habitat, followed by cerrado, peat bog, quartz gravel grassland, and sandy bogs, respectively. The main difference in the floristic composition among these habitats was related to the dominant species. Trachypogon spicatus(Poaceae) was the most dominant species in the rocky outcrops, Axonopus siccus(Poaceae) in the peat bogs, Lagenocarpus rigidus(Cyperaceae) in the sandy bogs, Schizachyrium tenerum(Poaceae) in the cerrado, while Vellozia sp. 8(Velloziaceae) dominated the vegetation in the quartz gravel grassland. This study demonstrated that physical and chemical soil properties strongly related the diversity of plant species occurring in the different habitats of rupestrian fields.

Investigation into the surface active groups of coal

The oxidation heat of coal is the direct reason leading to coal spontaneous combustion. When coal is exposed in oxygen atmosphere, the physical adsorption and chemisorption happened, and then which resulting chemical reaction followed heat between coal and oxygen. Owing to the complexity and uncertain of molecular structure of coal,it was only reduced that bridge bonds, side chains and O 2 containing functional groups in coal may be prone to oxidation in last year, but not to deeply investigate into the structures and the type of the active radicals. In this paper, according to the last achievements in coal structure research, the hypomethylether bond, hypoalkyl bond of α carbon atom with hydroxyl and α carbon atom with hypomethy side chain and hypomethyl bonds linking up two aromatic hydrocarbon in bridge bonds, and methoxy,aldehyde and alkyls of α carbon atom with hydroxy in side bonds are inferred to be free radical easily to lead to oxidize coal under the ambient temperature and pressure. The order from strong to weak of oxide activation of the seven surface active groups is aldehyde side chains, hypomethylether bonds, hypoalkyl bonds of α carbon atom with hydroxyl, hypoalkyl bonds of α carbon atom with hypomethyl, hypomethyl bonds linking up two aromatic hydrocarbon,methoxy, alkyls side chains of α carbon atom with hydroxyl. Because of the two unsaturated molecular tracks of O 2, unpaired electron clouds of the part of surface active groups of coal enter molecular tracks of O 2 to lead to chemisorb on the conjugate effect and induced effect of surface active groups, and then chemical reaction followed heat happens in them. On the basis of change of bond energy, weighted average method is adopted to count the reaction heat value of each mol CO,CO 2 and H 2O. The property of coal spontaneous combustion is different for the different number and oxidability of the active structure in the coal resulting in the different oxidation heat.