The technology advance of high-frequency weld adhesive used in automotive industry is introduced.The processing performance in door inner panel manufacture and the technology indexes of solvent HF-1and water-based HT-...The technology advance of high-frequency weld adhesive used in automotive industry is introduced.The processing performance in door inner panel manufacture and the technology indexes of solvent HF-1and water-based HT-508 adhesives are also describled.展开更多
A calculation formula of thermal-hydro-mechanical(THM)coupling crack initiation rate for brittle rock was derived based on the energy conservation law.The self-designed THM coupling fracture test with conductive adhe...A calculation formula of thermal-hydro-mechanical(THM)coupling crack initiation rate for brittle rock was derived based on the energy conservation law.The self-designed THM coupling fracture test with conductive adhesive electrical measurement method was applied to measuring the THM coupling crack propagation rate of brittle rock continuously.Research results show that both calculation and test results of crack initiation rate increased with increase of the temperature and the hydraulic pressure.They are almost in good agreement,which can prove validity of the calculation formula of THM coupling crack initiation rate.展开更多
Thermogravimetric study of rubber compositions （operating glove and catheter） in medical waste was carried out using the thermogravimetric analyser （TGA）,at the heating rate of 20 ℃/min in a stream of N2.The resu...Thermogravimetric study of rubber compositions （operating glove and catheter） in medical waste was carried out using the thermogravimetric analyser （TGA）,at the heating rate of 20 ℃/min in a stream of N2.The results indicate that the decomposition process of operating glove appears an obvious mass loss stage at 250-485 ℃,while catheter has two obvious stages at 240-510 ℃ and 655-800 ℃,respectively; both samples present endothermic pyrolysis reaction; the decomposition of operating glove and the first mass loss stage of catheter are in agreement with natural rubber pyrolysis; the second mass loss stage of catheter corresponds to CaCO3 decomposition.Based on the experimental results,a novel two-step four-reaction model was established to simulate the whole continuous processes,which could more satisfactorily describe and predict the pyrolysis processes of rubber compositions,being more mechanistic and conveniently serving for the engineering.展开更多
A single phase of zirconium diboride （ZrB2） powder was successfully synthesized by sol-gel method in Zr-B-C-O system, using zirconium oxychloride （ZrOC12 ~ 8H20）, nano-scale boron and suerose（C12H22011）as the st...A single phase of zirconium diboride （ZrB2） powder was successfully synthesized by sol-gel method in Zr-B-C-O system, using zirconium oxychloride （ZrOC12 ~ 8H20）, nano-scale boron and suerose（C12H22011）as the starting materials and propylene oxide （PO） as complexing agent at a low temperature. Simultaneously, the experimen- tal and theoretical studies of ZrB2 synthesized by boro/carbothermal reduction from novel sol-gel technology were discussed. The results indicated that the pure rod-like ZrB2 powder without residual ZrO2 phase could be obtained with a B/Zr molar ratio of 3.5 at 1 400~C in argon atmosphere. Besides, in this study, a kinetic model for the Zr-B-C-O sys- tem producing ZrB2 by boro/carbothermal reaction was established based on thermodynamic analysis. It was also ob- served that, with the increase of reaction temperature, the reaction which produced ZrB2 powders changed from the borothermal reaction to boro/carbothermal reaction in the Zr-B-C-O system.展开更多
By oxidative polycondensation of 1-naphthol and their copolycondensation with aniline or p-phenylenediamine the polyfucntional polyconjugated oligomers consisting of hydroxynaphthylene links have been prepared. These ...By oxidative polycondensation of 1-naphthol and their copolycondensation with aniline or p-phenylenediamine the polyfucntional polyconjugated oligomers consisting of hydroxynaphthylene links have been prepared. These soluble and meltable oligomers showing thermostability, semiconducting and paramagnetic properties and also high reactivity at reactions characteristic for aromatic hydroxyl groups were used as active filler at preparation of rubbers from butyl and butadiene-nitrile rubbers. It has been shown that in partial or full substitution of carbon black by oligohydroxynaphthylenes or cooligohydroxynaphthylenephenylamines in composition of vulcanizate the prepared rubbers are characterized by noticeably high heat-physical, physical-mechanical and electrical properties （Pv = 10^8 - 10^6Om. cm ）.展开更多
The coal fire is one of very serious disasters in natural, not only amount of coal resources was burned and some ecological environment problems such as ground subsidence, acid rain, pollution and vegetation died were...The coal fire is one of very serious disasters in natural, not only amount of coal resources was burned and some ecological environment problems such as ground subsidence, acid rain, pollution and vegetation died were caused serious. The No.4 coal seam outcrops fire in Haibaoqing was take as research object, based on the existing theory of mechanism and characteristics of coal outcrop fires, a new fire-fighting composite gel is applicated which fits in with extinguishment of outcrop coal fires well. The technology has many advantages in extinguishing coal fires including isolating the coal from oxygen and lowering the temperature of the high-temperature coal and rock. The structure and chemical composition as well as fires-fighting properties of the composite gel is analyzed profoundly, as a result, reduce and stop the environment destruction caused by the coal fire.展开更多
There have been few reports concerning the hydrothermal synthesis of silicon anode materials. In this manuscript, starting from the very cheap silica sol, we hydrothermally prepared porous silicon nanospheres in an au...There have been few reports concerning the hydrothermal synthesis of silicon anode materials. In this manuscript, starting from the very cheap silica sol, we hydrothermally prepared porous silicon nanospheres in an autoclave at 180 ℃. As anode materials for lithium-ion batteries （LIBs）, the as-prepared nano-silicon anode without any carbon coating delivers a high reversible specific capacity of 2,650 mAh·g^-1 at 0.36 A·g^-1 and a significant cycling stability of about 950 mAh·g^-1 at 3.6 A·g^-1 during 500 cycles.展开更多
A novel copper-mediated solvothermal method was proposed for synthesizing colloidal spheres of a new composition, palladium iodide （PdI2）. Typical procedure was designed to involve the introduction of cupric chlori...A novel copper-mediated solvothermal method was proposed for synthesizing colloidal spheres of a new composition, palladium iodide （PdI2）. Typical procedure was designed to involve the introduction of cupric chloride （CuCI2） as weak oxidant. CuCI2 was found to be essential for preventing the easy formation of palladium deposits as well as facilitating the synthesis and assembly. Under the co-effect of CuC12 and the surfactant of polyvinylpyrrolidone （PVP）, neutral PdI2 colloidal spheres with narrow size distribution were successfully produced. Such ion-assisted synthetic method is believed to be prospective in producing well-constructed nanostructures.展开更多
文摘The technology advance of high-frequency weld adhesive used in automotive industry is introduced.The processing performance in door inner panel manufacture and the technology indexes of solvent HF-1and water-based HT-508 adhesives are also describled.
基金Project(51474251) supported by the National Natural Science Foundation of China
文摘A calculation formula of thermal-hydro-mechanical(THM)coupling crack initiation rate for brittle rock was derived based on the energy conservation law.The self-designed THM coupling fracture test with conductive adhesive electrical measurement method was applied to measuring the THM coupling crack propagation rate of brittle rock continuously.Research results show that both calculation and test results of crack initiation rate increased with increase of the temperature and the hydraulic pressure.They are almost in good agreement,which can prove validity of the calculation formula of THM coupling crack initiation rate.
基金Project(50378062)supported by the National Natural Science Foundation of ChinaProject(09JCYBJC08100)supported by the Natural Science Foundation of Tianjin Municipality,ChinaProject supported by Key Laboratory Program of the Ministry of Education,China
文摘Thermogravimetric study of rubber compositions （operating glove and catheter） in medical waste was carried out using the thermogravimetric analyser （TGA）,at the heating rate of 20 ℃/min in a stream of N2.The results indicate that the decomposition process of operating glove appears an obvious mass loss stage at 250-485 ℃,while catheter has two obvious stages at 240-510 ℃ and 655-800 ℃,respectively; both samples present endothermic pyrolysis reaction; the decomposition of operating glove and the first mass loss stage of catheter are in agreement with natural rubber pyrolysis; the second mass loss stage of catheter corresponds to CaCO3 decomposition.Based on the experimental results,a novel two-step four-reaction model was established to simulate the whole continuous processes,which could more satisfactorily describe and predict the pyrolysis processes of rubber compositions,being more mechanistic and conveniently serving for the engineering.
基金Supported by the Fund for the Self-dependent Innovation of Tianjin University(2014)
文摘A single phase of zirconium diboride （ZrB2） powder was successfully synthesized by sol-gel method in Zr-B-C-O system, using zirconium oxychloride （ZrOC12 ~ 8H20）, nano-scale boron and suerose（C12H22011）as the starting materials and propylene oxide （PO） as complexing agent at a low temperature. Simultaneously, the experimen- tal and theoretical studies of ZrB2 synthesized by boro/carbothermal reduction from novel sol-gel technology were discussed. The results indicated that the pure rod-like ZrB2 powder without residual ZrO2 phase could be obtained with a B/Zr molar ratio of 3.5 at 1 400~C in argon atmosphere. Besides, in this study, a kinetic model for the Zr-B-C-O sys- tem producing ZrB2 by boro/carbothermal reaction was established based on thermodynamic analysis. It was also ob- served that, with the increase of reaction temperature, the reaction which produced ZrB2 powders changed from the borothermal reaction to boro/carbothermal reaction in the Zr-B-C-O system.
文摘By oxidative polycondensation of 1-naphthol and their copolycondensation with aniline or p-phenylenediamine the polyfucntional polyconjugated oligomers consisting of hydroxynaphthylene links have been prepared. These soluble and meltable oligomers showing thermostability, semiconducting and paramagnetic properties and also high reactivity at reactions characteristic for aromatic hydroxyl groups were used as active filler at preparation of rubbers from butyl and butadiene-nitrile rubbers. It has been shown that in partial or full substitution of carbon black by oligohydroxynaphthylenes or cooligohydroxynaphthylenephenylamines in composition of vulcanizate the prepared rubbers are characterized by noticeably high heat-physical, physical-mechanical and electrical properties （Pv = 10^8 - 10^6Om. cm ）.
文摘The coal fire is one of very serious disasters in natural, not only amount of coal resources was burned and some ecological environment problems such as ground subsidence, acid rain, pollution and vegetation died were caused serious. The No.4 coal seam outcrops fire in Haibaoqing was take as research object, based on the existing theory of mechanism and characteristics of coal outcrop fires, a new fire-fighting composite gel is applicated which fits in with extinguishment of outcrop coal fires well. The technology has many advantages in extinguishing coal fires including isolating the coal from oxygen and lowering the temperature of the high-temperature coal and rock. The structure and chemical composition as well as fires-fighting properties of the composite gel is analyzed profoundly, as a result, reduce and stop the environment destruction caused by the coal fire.
文摘There have been few reports concerning the hydrothermal synthesis of silicon anode materials. In this manuscript, starting from the very cheap silica sol, we hydrothermally prepared porous silicon nanospheres in an autoclave at 180 ℃. As anode materials for lithium-ion batteries （LIBs）, the as-prepared nano-silicon anode without any carbon coating delivers a high reversible specific capacity of 2,650 mAh·g^-1 at 0.36 A·g^-1 and a significant cycling stability of about 950 mAh·g^-1 at 3.6 A·g^-1 during 500 cycles.
基金supported by the National Basic Program of China for Nanoscience and Nanotechnology (973 Program,2011CB932401)the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (20921001)
文摘A novel copper-mediated solvothermal method was proposed for synthesizing colloidal spheres of a new composition, palladium iodide （PdI2）. Typical procedure was designed to involve the introduction of cupric chloride （CuCI2） as weak oxidant. CuCI2 was found to be essential for preventing the easy formation of palladium deposits as well as facilitating the synthesis and assembly. Under the co-effect of CuC12 and the surfactant of polyvinylpyrrolidone （PVP）, neutral PdI2 colloidal spheres with narrow size distribution were successfully produced. Such ion-assisted synthetic method is believed to be prospective in producing well-constructed nanostructures.
