氨制冷系统热虹吸冷却技术

阐述了沸腾高压氨液作冷却液的热虹吸环流间接冷却的原理，介绍分析了带热虹吸贮液器的典型热虹吸油冷却系统、带卧式贮液器的热虹吸油冷却系统、多台油冷却器的热虹吸冷却系统的流程，以及热虹吸油冷却系统的设计。

Numerical simulation and optimization design of the EGR cooler in vehicle

The EGR (exhaust gas recirculation) technique can greatly reduce the NOx emission of diesel engines, especially when an EGR cooler is employed. Numerical simulations are applied to study the flow field and temperature distributions inside the EGR cooler. Three different models of EGR cooler are investigated, among which model A is a traditional one, and models B and C are improved by adding a helical baffle in the cooling area. In models B and C the entry directions of cooling water are different, which mostly influences the flow resistance. The results show that the improved structures not only lengthen the flow path of the cooling water, but also enhance the heat exchange rate between the cool and hot media. In conclusion we suggest that the improved structures are more powerful than the traditional one.

THE COUPLED MODE BETWEEN THE KUROSHIO REGION MARINE HEATING ANOMALY AND THE NORTH PACIFIC ATMOSPHERIC CIRCULATION IN WINTERTIME

Using monthly reanalysis data of the National Center for Environmental Research/National Center for Atmospheric Research(NCEP/NCAR) and Objectively Analyzed Air-Sea Heat Flux(OAFlux) gathered during the winter,singular vector decomposition(SVD) analysis was conducted to reveal the coupled mode between the Kuroshio marine heating anomaly and the geopotential height at 500 hPa(Z500) over the North Pacific.The first SVD mode showed that when the northern Kuroshio marine heating anomaly was positive,the Z500 in the central and western sections of the North Pacific was anomalously low.By composing the meteorological field anomalies in the positive(or negative) years,it has been revealed that while the Aleutian Low deepens(or shallows),the northwesterly wind overlying the Kuroshio strengthens(or weakens) and induces the near-surface air to be cool(or warm).Furthermore,this increases(or decreases) the upward heat flux anomaly and cools(or warms) the sea surface temperature(SST) accordingly.In the vicinity of Kuroshio and its downstream region,the vertical structure of the air temperature along the latitude is baroclinic;however,the geopotential height is equivalently barotropic,which presents a cool trough(or warm ridge) spatial structure.The divergent wind and vertical velocities are introduced to show the anomalous zonal circulation cell.These are characterized by the rising(or descending) air in the central North Pacific,which flows westward and eastward toward the upper troposphere,descends(or rises) in the Kuroshio and in the western section of North America,and then strengthens(or weakens) the mid-latitude zonal cell(MZC).

A Revised CFB Wall-to-suspension Heat Transfer Model

Based on the Cluster Renewal Model of the particle motion in a CFB riser, a revised heat transfer model is developed, which introduces the latest research results of the hydrodynamics of the suspension flow in CFB. This model divides the heat transfer into two parts, which are due to the transient heat conduction by the covered clusters and the convection between the uncovered wall and the dispersed phase. Radiation at high temperature is regarded as being additive. The fraction of the covered wall by clusters is revised by a new formula, which is a function of the operating condition and the particle properties. The radiation between the dispersed phase and the uncovered wall includes not only the direct radiation to the uncovered wall, but also the radiation to the clusters and then reflected to the uncovered wall. Calculation was carried out for the CFB heat transfer model. The results were compared with the published typical experimental data of other researchers and showed a good agreement between them.

Experimental study of the flow and heat transfer of a gas–water mixture through a packed channel

Waste heat recovery from the flue gas of gasfired boilers was studied experimentally by measuring the flow and heat transfer of air and water through six kinds of packing with saturated humid air as the simulated flue gas.The experiments measured the effects of inlet air temperature, inlet air velocity and circulating water flow rate on the flow and heat transfer. The results show that higher inlet air temperatures and lower inlet air velocities lower the flow resistance and increase the heat transfer coefficient. The stainless steel packing had better surface wettability and larger thermal conductivity than the plastic packing, which enhanced the heat transfer between the water and the saturated moist air. When both the flow resistance reduction and the heat transfer enhancement were considered, the experimental results gave an optimal packing-specific surface area. A packed heat exchanger tower was designed for waste heat recovery from the flue gas of gas-fired boilers based on the experimental results which had better flow and heat transfer characteristics with lower pump and fan power consumption, more stable system operation and less thermal fluctuations compared with a non-packed heat transfer system with atomized water.