期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
热液流体活动规律高光谱遥感分析示范研究——以新疆白杨河铀矿床为例 被引量:8
1
作者 叶发旺 张川 +3 位作者 徐清俊 孟树 邱骏挺 王建刚 《矿床地质》 CAS CSCD 北大核心 2019年第6期1347-1364,共18页
高光谱遥感技术可以有效地用于分析热液流体活动规律,进而指导找矿预测。利用国际先进的CASI/SASI航空高光谱遥感技术、并结合ASD便携式地面高光谱技术手段,文章从航空、地面、深部钻孔岩芯等不同尺度对白杨河铀矿区及周围地表和深部的... 高光谱遥感技术可以有效地用于分析热液流体活动规律,进而指导找矿预测。利用国际先进的CASI/SASI航空高光谱遥感技术、并结合ASD便携式地面高光谱技术手段,文章从航空、地面、深部钻孔岩芯等不同尺度对白杨河铀矿区及周围地表和深部的热液蚀变类型和热液活动规律等进行了立体识别与研究。研究表明,白杨河铀矿区及周围航空高光谱遥感识别的蚀变矿物在空间上可分为北部蚀变区、矿区蚀变区、南部蚀变区等3个蚀变带。北部蚀变区发育一套以叶腊石、明矾石、高铝绢云母为主的酸性热液蚀变组合;矿区蚀变区地表发育高铝绢云母、中铝绢云母、赤铁矿、硅化等热液蚀变,矿区深部钻孔岩芯主要发育高铝绢云母、中铝绢云母、低铝绢云母、高岭石、赤铁矿、褐铁矿、绿泥石等蚀变矿物及其混合蚀变,且绢云母蚀变矿物的Al-OH吸收峰波长位置存在“单向递减”和“先减后增”等2种明显变化规律;南部蚀变区发育低铝绢云母和中铝绢云母蚀变。分析表明,北部蚀变区是相对的区域热液流体活动中心,铀矿区蚀变区是流体活动中心旁侧的一个明显的热液流体活动区,南部蚀变区是更加远离流体活动中心的,温度进一步降低的流体活动区。矿区北缘接触带的热液蚀变温度要比南缘接触带蚀变温度高,北缘接触带热液流体蚀变温度具有由中西部向东部不断降低、由接触带向接触带外围不断降低的特点。总之,白杨河铀矿区深部热液流体活动至少存在“直流型”和“分流型”2种典型的形式,前者反映热液流体活动温度自深部→接触带→浅部不断降低的特点,后者反映热液流体活动温度自接触带分别向上和向下逐渐降低的特点。此外,文章还对热液流体活动与铀矿化关系,以及矿区外围铀矿找矿方向进行了分析。 展开更多
关键词 地质学 高光谱遥感 矿物识别 热液流体活动 热液流体活动中心 白杨河铀矿床 新疆
下载PDF
Primary dolostone formation related to mantle-originated exhalative hydrothermal activities,Permian Yuejingou section,Santanghu area, Xinjiang,NW China 被引量:18
2
作者 LIU YiQun JIAO Xin +8 位作者 LI Hong YUAN MingSheng YANG Wan ZHOU XiaoHu LIANG Hao ZHOU DingWu ZHENG ChaoYang SUN Qin WANG ShuangShuang 《Science China Earth Sciences》 SCIE EI CAS 2012年第2期183-192,共10页
The Permian Lucaogou Formation is an important hydrocarbon source rock in the Junggar, Turpan, and Santanghu basins in Xinjiang, NW China. For the first time, dolostones associated with mantle-originated exhalative hy... The Permian Lucaogou Formation is an important hydrocarbon source rock in the Junggar, Turpan, and Santanghu basins in Xinjiang, NW China. For the first time, dolostones associated with mantle-originated exhalative hydrothermal fluid flows are discovered in Yuejingou section in the Santanghu Basin area. They include dolomicrite, doloarenite, and a small amount of dolorudite, and are finely (0.05-0.15 cm thick) interlaminated with lime micrite and dolomicritic analcime laminites. Alkali feldspar and analcime grains are common in doloarenite and are interpreted as having been derived from analcime phonolites and peralkaline magmatic rocks. These magmatic fragments were brought up from subsurface by hydrothermal fluid flow and had experienced exhalative brecciation, transport, and deposition on the lake floor. The matrix consists dominantly of dolomite and ankerite smaller than 0.01 mm. The dolostones can be subdivided into four types on the basis of mineral composition and content. The detrital analcime and alkaline feldspar grains and tuff lithics are interpreted as intraclasts, which were deposited in an under-filled starved lake basin. The δ18OPDB values of dolostones are -5‰ to -21.1‰, and -11.9‰ on average; the 87Sr/86Sr ratios of dolostones are 0.70457 to 0.706194, and 0.705005 on average. These values, in combination with evidence of multi-episodes of peralkaline extrusion, suggest a mantle origin of the hydrothermal fluids, which may have promoted primary dolomite formation. The fluid from the upper mantle caused serpentinization of ultramafic rocks that intruded into the lower crust to obtain Mg2+ and Fe2+, and injected the ions into the lake water as the Mg and Fe sources for dolomite and ankerite. Hydro- thermal fluids associated with peralkaline magmatic rocks also provided Ca2+, Mg2+, Fe2+, and CO32-. Explosive breccias formed and dolostones were convoluted near the vent of hydrothermal fluid exhalation, whereas laminated dolostones formed farther away from the vent. The dolostones are primary dolomite deposition in an intracontinental rift basin and associated with mantle-originated hydrothermal fluids. They provide an insight into the origin of dolomite formation in the geologic history and clues to understand the sedimentary environments and tectonic conditions in northern Xinjiang during the late Paleozoic. 展开更多
关键词 primary dolostone mantle-originated hydrothermal exhalative deposits intracontinental rift PERMIAN Santanghu Area
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部